Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
073025-NOI Deyton-226227_revised with plan set date
Notice of Intent: Red Lily Pond and Lake Elizabeth Herbicide Treatments to Manage Aquatic Nuisance Vegetation Centerville, Massachusetts Revised July 30, 2025 Submitted To: Barnstable Conservation Commission 367 Main Street Hyannis, Massachusetts 02601 Prepared By: TRC 404 Wyman Street, Suite 375 Waltham, Massachusetts 02451 On Behalf Of: Red Lily Pond Project Association, Inc. TRC Project No. 630229.0000.0000 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 i TABLE OF CONTENTS Section Page NOTICE OF INTENT MATERIALS WPA Form 3 – Notice of Intent Wetlands Fee Transmittal Form WPA Form 3, Appendix A – Ecological Restoration Limited Projects Checklist Abutter Notification Material Project Narrative 1.0 INTRODUCTION ..................................................................................................................1 2.0 EXISTING CONDITIONS ......................................................................................................1 2.1 Wetland Resource Areas ........................................................................................................... 3 2.2 State-listed Species ................................................................................................................... 4 3.0 PROJECT DESCRIPTION ....................................................................................................4 3.1 Herbicide Treatments ................................................................................................................. 5 4.0 IMPACT AVOIDANCE AND MINIMIZATION ........................................................................6 4.1 Herbicide Treatments ................................................................................................................. 6 4.2 Monitoring Program.................................................................................................................... 7 5.0 REGULATORY COMPLIANCE ............................................................................................9 5.1 Ecological Restoration Limited Project Provisions ..................................................................... 9 5.2 Land Under Water .................................................................................................................... 11 5.3 Other Resource Areas ............................................................................................................. 11 5.4 Chapter 237, Wetlands Protection Ordinance of the Code of the Town of Barnstable ........... 12 6.0 REFERENCES ................................................................................................................... 12 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 ii TABLES (EMBEDDED) Table 1 Aquatic Plant Species Observed at Red Lily Pond and Lake Elizabeth Table 2 Proposed Water Quality Monitoring Locations FIGURES Figure 1 Red Lily Pond and Lake Elizabeth Project Locus Figure 2 Red Lily Pond and Lake Elizabeth Wetland Resource Areas Figure 3 Red Lily Pond and Lake Elizabeth Treatment Maps ATTACHMENTS Attachment A: Biological Assessment, Red Lily Pond and Lake Elizabeth Attachment B: Herbicide Product Labels Attachment C: Division of Marine Fisheries Diadromous Fish Determination Correspondence Attachment D: Environmental Monitor Notice Attachment E: Town of Barnstable Chapter 707 Checklist and Form PA WPA Form 3 – Notice of Intent wpaform3.doc • rev. 6/18/2020 Page 1 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Important: When filling out forms on the computer, use only the tab key to move your cursor - do not use the return key. Note: Before completing this form consult your local Conservation Commission regarding any municipal bylaw or ordinance. A. General Information 1. Project Location (Note: electronic filers will click on button to locate project site): Red Lily Pond and Lake Elizabeth - Near 177 Centerville Ave Barnstable b. City/Town 02655 c. Zip Code Latitude and Longitude: 41.64010 d. Latitude -70.33238 e. Longitude 226 & 227 f. Assessors Map/Plat Number g. Parcel /Lot Number 2. Applicant: Patricia a. First Name Deyton b. Last Name Red Lily Pond Project Association, Inc. c. Organization 39 Prospect Ave d. Street Address Centerville e. City/Town MA f. State 02632 g. Zip Code 616-312-9866 h. Phone Number i. Fax Number deyton@comcast.net j. Email Address 3. Property owner (required if different from applicant): Check if more than one owner a. First Name b. Last Name Commonwealth of Massachusetts c. Organization d. Street Address e. City/Town f. State g. Zip Code h. Phone Number i. Fax Number j. Email address 4. Representative (if any): Morgan a. First Name Proko b. Last Name TRC c. Company 404 Wyman Street, Suite 375 d. Street Address Waltham e. City/Town MA f. State 02451 g. Zip Code (781) 419-7703 h. Phone Number i. Fax Number mproko@trccompanies.com j. Email address 5. Total WPA Fee Paid (from NOI Wetland Fee Transmittal Form): $500 a. Total Fee Paid $237.50 b. State Fee Paid $262.50 c. City/Town Fee Paid wpaform3.doc • rev. 6/18/2020 Page 2 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town A. General Information (continued) 6. General Project Description: Red Lily Pond Project Association, Inc. is proposing to implement a vegetation management program at Red Lily Pond and Lake Elizabeth to manage dense growths of nuisance aquatic plants. Management actions will include herbicide treatments. 7a. Project Type Checklist: (Limited Project Types see Section A. 7b.) 1. Single Family Home 2. Residential Subdivision 3. Commercial/Industrial 4. Dock/Pier 5. Utilities 6. Coastal engineering Structure 7. Agriculture (e.g., cranberries, forestry) 8. Transportation 9. Other 7b. Is any portion of the proposed activity eligible to be treated as a limited project (including Ecological Restoration Limited Project) subject to 310 CMR 10.24 (coastal) or 310 CMR 10.53 (inland)? 1. Yes No If yes, describe which limited project applies to this project. (See 310 CMR 10.24 and 10.53 for a complete list and description of limited project types) 310 CMR 10.53(4)(e)(5): Other ecological restoration projects: prevention of pollution, protection of fish and wildlife habitat If the proposed activity is eligible to be treated as an Ecological Restoration Limited Project (310 CMR10.24(8), 310 CMR 10.53(4)), complete and attach Appendix A: Ecological Restoration Limited Project Checklist and Signed Certification. 8. Property recorded at the Registry of Deeds for: a. County b. Certificate # (if registered land) c. Book d. Page Number B. Buffer Zone & Resource Area Impacts (temporary & permanent) 1. Buffer Zone Only – Check if the project is located only in the Buffer Zone of a Bordering Vegetated Wetland, Inland Bank, or Coastal Resource Area. 2. Inland Resource Areas (see 310 CMR 10.54-10.58; if not applicable, go to Section B.3, Coastal Resource Areas). Check all that apply below. Attach narrative and any supporting documentation describing how the project will meet all performance standards for each of the resource areas altered, including standards requiring consideration of alternative project design or location. wpaform3.doc • rev. 6/18/2020 Page 3 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town B. Buffer Zone & Resource Area Impacts (temporary & permanent) (cont’d) For all projects affecting other Resource Areas, please attach a narrative explaining how the resource area was delineated. Resource Area Size of Proposed Alteration Proposed Replacement (if any) a. Bank 1. linear feet 2. linear feet b. Bordering Vegetated Wetland 1. square feet 2. square feet c. Land Under Waterbodies and Waterways 462,080 1. square feet 2. square feet 3. cubic yards dredged Resource Area Size of Proposed Alteration Proposed Replacement (if any) d. Bordering Land Subject to Flooding 1. square feet 2. square feet 3. cubic feet of flood storage lost 4. cubic feet replaced e. Isolated Land Subject to Flooding 1. square feet 2. cubic feet of flood storage lost 3. cubic feet replaced f. Riverfront Area 1. Name of Waterway (if available) - specify coastal or inland 2. Width of Riverfront Area (check one): 25 ft. - Designated Densely Developed Areas only 100 ft. - New agricultural projects only 200 ft. - All other projects 3. Total area of Riverfront Area on the site of the proposed project: square feet 4. Proposed alteration of the Riverfront Area: a. total square feet b. square feet within 100 ft. c. square feet between 100 ft. and 200 ft. 5. Has an alternatives analysis been done and is it attached to this NOI? Yes No 6. Was the lot where the activity is proposed created prior to August 1, 1996? Yes No 3. Coastal Resource Areas: (See 310 CMR 10.25-10.35) Note: for coastal riverfront areas, please complete Section B.2.f. above. wpaform3.doc • rev. 6/18/2020 Page 4 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town B. Buffer Zone & Resource Area Impacts (temporary & permanent) (cont’d) Check all that apply below. Attach narrative and supporting documentation describing how the project will meet all performance standards for each of the resource areas altered, including standards requiring consideration of alternative project design or location. Online Users: Include your document transaction number (provided on your receipt page) with all supplementary information you submit to the Department. Resource Area Size of Proposed Alteration Proposed Replacement (if any) a. Designated Port Areas Indicate size under Land Under the Ocean, below b. Land Under the Ocean 1. square feet 2. cubic yards dredged c. Barrier Beach Indicate size under Coastal Beaches and/or Coastal Dunes below d. Coastal Beaches 1. square feet 2. cubic yards beach nourishment e. Coastal Dunes 1. square feet 2. cubic yards dune nourishment Size of Proposed Alteration Proposed Replacement (if any) f. Coastal Banks 1. linear feet g. Rocky Intertidal Shores 1. square feet h. Salt Marshes 1. square feet 2. sq ft restoration, rehab., creation i. Land Under Salt Ponds 1. square feet 2. cubic yards dredged j. Land Containing Shellfish 1. square feet k. Fish Runs Indicate size under Coastal Banks, inland Bank, Land Under the Ocean, and/or inland Land Under Waterbodies and Waterways, above 1. cubic yards dredged l. Land Subject to Coastal Storm Flowage 1. square feet 4. Restoration/Enhancement If the project is for the purpose of restoring or enhancing a wetland resource area in addition to the square footage that has been entered in Section B.2.b or B.3.h above, please enter the additional amount here. a. square feet of BVW b. square feet of Salt Marsh 5. Project Involves Stream Crossings a. number of new stream crossings b. number of replacement stream crossings wpaform3.doc • rev. 6/18/2020 Page 5 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town C. Other Applicable Standards and Requirements This is a proposal for an Ecological Restoration Limited Project. Skip Section C and complete Appendix A: Ecological Restoration Limited Project Checklists – Required Actions (310 CMR 10.11). Streamlined Massachusetts Endangered Species Act/Wetlands Protection Act Review 1. Is any portion of the proposed project located in Estimated Habitat of Rare Wildlife as indicated on the most recent Estimated Habitat Map of State-Listed Rare Wetland Wildlife published by the Natural Heritage and Endangered Species Program (NHESP)? To view habitat maps, see the Massachusetts Natural Heritage Atlas or go to http://maps.massgis.state.ma.us/PRI_EST_HAB/viewer.htm. a. Yes No If yes, include proof of mailing or hand delivery of NOI to: Natural Heritage and Endangered Species Program Division of Fisheries and Wildlife 1 Rabbit Hill Road Westborough, MA 01581 b. Date of map If yes, the project is also subject to Massachusetts Endangered Species Act (MESA) review (321 CMR 10.18). To qualify for a streamlined, 30-day, MESA/Wetlands Protection Act review, please complete Section C.1.c, and include requested materials with this Notice of Intent (NOI); OR complete Section C.2.f, if applicable. If MESA supplemental information is not included with the NOI, by completing Section 1 of this form, the NHESP will require a separate MESA filing which may take up to 90 days to review (unless noted exceptions in Section 2 apply, see below). c. Submit Supplemental Information for Endangered Species Review∗ 1. Percentage/acreage of property to be altered: (a) within wetland Resource Area percentage/acreage (b) outside Resource Area percentage/acreage 2. Assessor’s Map or right-of-way plan of site 2. Project plans for entire project site, including wetland resource areas and areas outside of wetlands jurisdiction, showing existing and proposed conditions, existing and proposed tree/vegetation clearing line, and clearly demarcated limits of work ∗∗ (a) Project description (including description of impacts outside of wetland resource area & buffer zone) (b) Photographs representative of the site ∗ Some projects not in Estimated Habitat may be located in Priority Habitat, and require NHESP review (see https://www.mass.gov/ma- endangered-species-act-mesa-regulatory-review). Priority Habitat includes habitat for state-listed plants and strictly upland species not protected by the Wetlands Protection Act. ∗∗ MESA projects may not be segmented (321 CMR 10.16). The applicant must disclose full development plans even if such plans are not required as part of the Notice of Intent process. wpaform3.doc • rev. 6/18/2020 Page 6 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town C. Other Applicable Standards and Requirements (cont’d) (c) MESA filing fee (fee information available at https://www.mass.gov/how-to/how-to-file-for- a-mesa-project-review). Make check payable to “Commonwealth of Massachusetts - NHESP” and mail to NHESP at above address Projects altering 10 or more acres of land, also submit: (d) Vegetation cover type map of site (e) Project plans showing Priority & Estimated Habitat boundaries (f) OR Check One of the Following 1. Project is exempt from MESA review. Attach applicant letter indicating which MESA exemption applies. (See 321 CMR 10.14, https://www.mass.gov/service-details/exemptions-from-review-for-projectsactivities-in- priority-habitat; the NOI must still be sent to NHESP if the project is within estimated habitat pursuant to 310 CMR 10.37 and 10.59.) 2. Separate MESA review ongoing. a. NHESP Tracking # b. Date submitted to NHESP 3. Separate MESA review completed. Include copy of NHESP “no Take” determination or valid Conservation & Management Permit with approved plan. 3. For coastal projects only, is any portion of the proposed project located below the mean high water line or in a fish run? a. Not applicable – project is in inland resource area only b. Yes No If yes, include proof of mailing, hand delivery, or electronic delivery of NOI to either: South Shore - Cohasset to Rhode Island border, and the Cape & Islands: Division of Marine Fisheries - Southeast Marine Fisheries Station Attn: Environmental Reviewer 836 South Rodney French Blvd. New Bedford, MA 02744 Email: dmf.envreview-south@mass.gov North Shore - Hull to New Hampshire border: Division of Marine Fisheries - North Shore Office Attn: Environmental Reviewer 30 Emerson Avenue Gloucester, MA 01930 Email: dmf.envreview-north@mass.gov Also if yes, the project may require a Chapter 91 license. For coastal towns in the Northeast Region, please contact MassDEP’s Boston Office. For coastal towns in the Southeast Region, please contact MassDEP’s Southeast Regional Office. c. Is this an aquaculture project? d. Yes No If yes, include a copy of the Division of Marine Fisheries Certification Letter (M.G.L. c. 130, § 57). wpaform3.doc • rev. 6/18/2020 Page 7 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town C. Other Applicable Standards and Requirements (cont’d) Online Users: Include your document transaction number (provided on your receipt page) with all supplementary information you submit to the Department. 4. Is any portion of the proposed project within an Area of Critical Environmental Concern (ACEC)? a. Yes No If yes, provide name of ACEC (see instructions to WPA Form 3 or MassDEP Website for ACEC locations). Note: electronic filers click on Website. b. ACEC 5. Is any portion of the proposed project within an area designated as an Outstanding Resource Water (ORW) as designated in the Massachusetts Surface Water Quality Standards, 314 CMR 4.00? a. Yes No 6. Is any portion of the site subject to a Wetlands Restriction Order under the Inland Wetlands Restriction Act (M.G.L. c. 131, § 40A) or the Coastal Wetlands Restriction Act (M.G.L. c. 130, § 105)? a. Yes No 7. Is this project subject to provisions of the MassDEP Stormwater Management Standards? a. Yes. Attach a copy of the Stormwater Report as required by the Stormwater Management Standards per 310 CMR 10.05(6)(k)-(q) and check if: 1. Applying for Low Impact Development (LID) site design credits (as described in Stormwater Management Handbook Vol. 2, Chapter 3) 2. A portion of the site constitutes redevelopment 3. Proprietary BMPs are included in the Stormwater Management System. b. No. Check why the project is exempt: 1. Single-family house 2. Emergency road repair 3. Small Residential Subdivision (less than or equal to 4 single-family houses or less than or equal to 4 units in multi-family housing project) with no discharge to Critical Areas. D. Additional Information This is a proposal for an Ecological Restoration Limited Project. Skip Section D and complete Appendix A: Ecological Restoration Notice of Intent – Minimum Required Documents (310 CMR 10.12). Applicants must include the following with this Notice of Intent (NOI). See instructions for details. Online Users: Attach the document transaction number (provided on your receipt page) for any of the following information you submit to the Department. 1. USGS or other map of the area (along with a narrative description, if necessary) containing sufficient information for the Conservation Commission and the Department to locate the site. (Electronic filers may omit this item.) 2. Plans identifying the location of proposed activities (including activities proposed to serve as a Bordering Vegetated Wetland [BVW] replication area or other mitigating measure) relative to the boundaries of each affected resource area. wpaform3.doc • rev. 6/18/2020 Page 8 of 9 4 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town D. Additional Information (cont’d) 3. Identify the method for BVW and other resource area boundary delineations (MassDEP BVW Field Data Form(s), Determination of Applicability, Order of Resource Area Delineation, etc.), and attach documentation of the methodology. 4. List the titles and dates for all plans and other materials submitted with this NOI. a. Plan Title b. Prepared By c. Signed and Stamped by d. Final Revision Date e. Scale f. Additional Plan or Document Title g. Date 5. If there is more than one property owner, please attach a list of these property owners not listed on this form. 6. Attach proof of mailing for Natural Heritage and Endangered Species Program, if needed. 7. Attach proof of mailing for Massachusetts Division of Marine Fisheries, if needed. 8. Attach NOI Wetland Fee Transmittal Form 9. Attach Stormwater Report, if needed. E. Fees 1.Fee Exempt: No filing fee shall be assessed for projects of any city, town, county, or district of the Commonwealth, federally recognized Indian tribe housing authority, municipal housing authority, or the Massachusetts Bay Transportation Authority. Applicants must submit the following information (in addition to pages 1 and 2 of the NOI Wetland Fee Transmittal Form) to confirm fee payment: 2. Municipal Check Number 3. Check date 4. State Check Number 5. Check date 6. Payor name on check: First Name 7. Payor name on check: Last Name 1707 7/30/2025 1706 7/30/2025 Red Lily Pond Project Association, Inc. Narrative and attachments July 30, 2025 Wetlands Fee Transmittal Form noifeetf.doc • Wetland Fee Transmittal Form • rev. 10/11 Page 1 of 2 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands NOI Wetland Fee Transmittal Form Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Important: When filling out forms on the computer, use only the tab key to move your cursor - do not use the return key. A.Applicant Information 1.Location of Project: Red Lily Pond Project Association, Inc. a. Street Address Barnstable b.City/Town c.Check number $500.00 d.Fee amount 2.Applicant Mailing Address: Patricia a.First Name Deyton b.Last Name Red Lily Pond Project Association, Inc c.Organization 39 Prospect Ave d. Mailing Address Centerville e.City/Town MA f. State 02632 g.Zip Code 616-312-9866 h.Phone Number i. Fax Number deyton@comcast.net j.Email Address 3.Property Owner (if different): a.First Name b.Last Name Commonwealth of Massachusetts c.Organization d. Mailing Address e.City/Town f. State g.Zip Code h.Phone Number i. Fax Number j.Email Address To calculate filing fees, refer to the category fee list and examples in the instructions for filling out WPA Form 3 (Notice of Intent). B.Fees Fee should be calculated using the following process & worksheet. Please see Instructions before filling out worksheet. Step 1/Type of Activity: Describe each type of activity that will occur in wetland resource area and buffer zone. Step 2/Number of Activities: Identify the number of each type of activity. Step 3/Individual Activity Fee: Identify each activity fee from the six project categories listed in the instructions. Step 4/Subtotal Activity Fee: Multiply the number of activities (identified in Step 2) times the fee per category (identified in Step 3) to reach a subtotal fee amount. Note: If any of these activities are in a Riverfront Area in addition to another Resource Area or the Buffer Zone, the fee per activity should be multiplied by 1.5 and then added to the subtotal amount. Step 5/Total Project Fee: Determine the total project fee by adding the subtotal amounts from Step 4. Step 6/Fee Payments: To calculate the state share of the fee, divide the total fee in half and subtract $12.50. To calculate the city/town share of the fee, divide the total fee in half and add $12.50. 1706 noifeetf.doc • Wetland Fee Transmittal Form • rev. 10/11 Page 2 of 2 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands NOI Wetland Fee Transmittal Form Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 B. Fees (continued) Step 1/Type of Activity Step 2/Number of Activities Step 3/Individual Activity Fee Step 4/Subtotal Activity Fee Category 2 1 $500 $500 Step 5/Total Project Fee: $500 Step 6/Fee Payments: Total Project Fee: $500 a. Total Fee from Step 5 State share of filing Fee: $237.50 b. 1/2 Total Fee less $12.50 City/Town share of filling Fee: $262.50 c. 1/2 Total Fee plus $12.50 C. Submittal Requirements a.) Complete pages 1 and 2 and send with a check or money order for the state share of the fee, payable to the Commonwealth of Massachusetts. Department of Environmental Protection Box 4062 Boston, MA 02211 b.) To the Conservation Commission: Send the Notice of Intent or Abbreviated Notice of Intent; a copy of this form; and the city/town fee payment. To MassDEP Regional Office (see Instructions): Send a copy of the Notice of Intent or Abbreviated Notice of Intent; a copy of this form; and a copy of the state fee payment. (E-filers of Notices of Intent may submit these electronically.) WPA Form 3, Appendix A – Ecological Restoration Limited Projects Checklist noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 1 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Checklist This Ecological Restoration Limited Project Eligibility Checklist guides the applicant in determining if their project is eligible to file as an Inland or Coastal Ecological Restoration Limited Project (310 CMR 10.53(4) or 310 CMR 10.24(8) respectively). These criteria must be met when submitting the Ecological Restoration Limited Project Notice of Intent to ensure that the restoration and improvement of the natural capacity of a Resource Area(s) to protect and sustain the interests identified in the WPA is necessary to achieve the project’s ecological restoration goals. Important: When filling out forms on the computer, use only the tab key to move your cursor - do not use the return key. Note: Before completing this form consult your local Conservation Commission regarding any municipal bylaw or ordinance. Regulatory Features of All Coastal and Inland Ecological Restoration Limited Projects (a) May result in the temporary or permanent loss of/or conversion of Resource Area: An Ecological Restoration Limited Project that meets the requirements of 310 CMR 10.24(8) may result in the temporary or permanent loss of Resource Areas and/or the conversion of one Resource Area to another when such loss is necessary to the achievement of the project’s ecological restoration goals. (b) Exemption from wildlife habitat evaluation: A NOI for an Ecological Restoration Limited Project that meets the minimum requirements for Ecological Restoration Projects and for a MassDEP Combined Application outlined in 310 CMR 10.12(1) and (2) is exempt from providing a wildlife habitat evaluation (310 CMR 10.60). (c) The following are considerations for applicants filing an Ecological Restoration Limited Project NOI and for the issuing authority approving a project as an Ecological Restoration Limited Project: The condition of existing and historic Resource Areas proposed for restoration. Evidence of the extent and severity of the impairment(s) that reduce the capacity of the Resource Areas to protect and sustain the interests identified in M.G.L. c. 131, § 40. The magnitude and significance of the benefits of the Ecological Restoration Project in improving the capacity of the affected Resource Areas to protect and sustain the other interests identified in M.G.L. c. 131, § 40. The magnitude and significance of the impacts of the Ecological Restoration Project on existing Resource Areas that may be modified, converted and/or lost and the interests for which said Resource Areas are presumed significant in 310 CMR 10.00, and the extent to which the project will: a. avoid adverse impacts to Resource Areas and the interests identified in M.G.L. c. 131, § 40, that can be avoided without impeding the achievement of the project’s ecological restoration goals. b. minimize adverse impacts to Resource Areas and the interests identified in M.G.L. c. 131, § 40, that are necessary to the achievement of the project’s ecological restoration goals. c. utilize best management practices such as erosion and siltation controls and proper construction sequencing to avoid and minimize adverse construction impacts to resource areas and the interests identified in M.G.L. c. 131, § 40. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 2 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Coastal Ecological Restoration Limited Projects (310 CMR 10.24(8)) Complete this Eligibility Criteria Checklist before filling out a Notice of Intent Application to determine if your project qualifies as a Coastal Ecological Restoration Limited Project. (310 CMR 10.24(8)) Sign the Eligibility Certification at the end of Appendix A, and attach the checklist with supporting documentation and the Eligibility Certification to your Notice of Intent Application. General Eligibility Criteria for All Coastal Ecological Restoration Limited Projects Notwithstanding the requirements of 310 CMR 10.25 through 10.35, 310 CMR 10.54 through 10.58, and the Wildlife Habitat evaluations in 310 CMR 10.60, the Issuing Authority may issue an Order of Conditions permitting an Ecological Restoration Project listed in 310 CMR 10.24(8)(e) as an Ecological Restoration Limited Project and impose such conditions as will contribute to the interests identified in the WPA M.G.L. provided that the project meets all the requirements in 310 CMR 10.24 (8). The project is an Ecological Restoration Project as defined in 310 CMR 10.04 and is a project type listed below [310 CMR 10.24(8)(e)]. Tidal Restoration. Shellfish Habitat Restoration. Other Ecological Restoration Limited Project Type. The project will further at least one of the WPA (M.G.L. c. 131, § 40) interests identified below. Protection of public or private water supply. Protection of ground water supply. Flood control. Storm damage prevention. Prevention of pollution. Protection of land containing shellfish. Protection of fisheries. Protection of wildlife habitat. If the project will impact an area located within estimated habitat which is indicated on the most recent Estimated Habitat Map of State-Listed Rare Wetlands, a NHESP preliminary written determination is attached to the NOI submittal that the project will not have any adverse long-term and short-term effects on specified habitat sites of Rare Species or the project will be carried out in accordance with an approved NHESP habitat management plan. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 3 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Coastal Ecological Restoration Limited Projects (310 CMR 10.24(8)) (Cont.) General Eligibility Criteria for All Coastal Ecological Restoration Limited Projects (cont.) If the project is located in a Coastal Dune or Barrier Beach, the project avoids and minimizes armoring of the Coastal Dune or Barrier Beach to the maximum extent practicable. The project complies with all applicable provisions of 310 CMR 10.24(1) through (6) and 310 CMR 10.24(9) and (10). Additional Eligibility Criteria for Specific Coastal Ecological Restoration Limited Project Types These additional criteria must be met to qualify as an Ecological Restoration Limited Project to ensure that the restoration and improvement of the natural capacity of a Resource Area to protect and sustain the interests identified in the WPA is necessary to achieve the project’s ecological restoration goals. This Ecological Restoration Limited Project application meets the eligibility criteria for Ecological Restoration Limited Project [310 CMR 10.24(8)(a) through (d) and as proposed, furthers at least one of the WPA interests is for the project type identified below. Tidal Restoration Projects A project to restore tidal flow that will not significantly increase flooding or storm damage impacts to the built environment, including without limitation, buildings, wells, septic systems, roads or other man-made structures or infrastructure. Shellfish Habitat Restoration Projects The project has received a Special Projects Permit from the Division of Marine Fisheries or, if a municipality, has received a shellfish propagation permit. The project is made of cultch (e.g., shellfish shells from oyster, surf or ocean clam) or is a structure manufactured specifically for shellfish enhancement (e.g., reef blocks, reef balls, racks, floats, rafts, suspended gear). Other Ecological Restoration Projects that meet the criteria set forth in 310 CMR 10.24(8)(a) through (d). Restoration, enhancement, or management of Rare Species habitat. Restoration of hydrologic and habitat connectivity. Removal of aquatic nuisance vegetation to impede eutrophication. Thinning or planting of vegetation to improve habitat value. Fill removal and re-grading. Riparian corridor re-naturalization. River floodplain re-connection. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 4 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Coastal Ecological Restoration Limited Projects (310 CMR 10.24(8)) (Cont.) Additional Eligibility Criteria for Specific Coastal Ecological Restoration Limited Project Types In-stream habitat enhancement. Remediation of historic tidal wetland ditching. Eelgrass restoration. Invasive species management. Installation of fish passage structures. Other. Describe: This project involves the construction, repair, replacement or expansion of public or private infrastructure (310 CMR 10.24(9). The NOI attachment labeled is an operation and maintenance plan to ensure that the infrastructure will continue to function as designed. The operation and maintenance plan will be implemented as a continuing condition in the Order of Conditions and the Certificate of Compliance. This project proposes to replace an existing stream crossing (310 CMR 10.24(10). The crossing complies with the Massachusetts Stream Crossing Standards to the maximum extent practicable with details provided in the NOI. The crossing type: Replaces an existing non-tidal crossing that is part of an Anadromous/Catadromous Fish Run (310 CMR 10.35) Replaces an existing tidal crossing that restricts tidal flow. The tidal restriction will be eliminated to the maximum extent practicable. At a minimum, in evaluating the potential to comply with the standards to the maximum extent practicable the following criteria have been consider site constraints in meeting the standard, undesirable effects or risk in meeting the standard, and the environmental benefit of meeting the standard compared to the cost, by evaluating the following: The potential for downstream flooding; Upstream and downstream habitat (in-stream habitat, wetlands); Potential for erosion and head-cutting; Stream stability; Habitat fragmentation caused by the crossing; The amount of stream mileage made accessible by the improvements; Storm flow conveyance; noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 5 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Coastal Ecological Restoration Limited Projects (310 CMR 10.24(8)) (Cont.) Additional Eligibility Criteria for Specific Coastal Ecological Restoration Limited Project Types Engineering design constraints specific to the crossing; Hydrologic constraints specific to the crossing; Impacts to wetlands that would occur by improving the crossing; Potential to affect property and infrastructure; and Cost of replacement. Eligibility Criteria - Inland Ecological Restoration Limited Project (310 CMR 10.53(4)) Complete this Eligibility Criteria Checklist before filling out a Notice of Intent Application to determine if your project qualifies as an Inland Ecological Restoration Limited Project. (310 CMR 10.53(4)) Sign the Eligibility Certification at the end of Appendix A, and attach the checklist with supporting documentation and the Eligibility Certification to your Notice of Intent Application. General Eligibility Criteria for All Inland Ecological Restoration Limited Projects Notwithstanding the requirements of any other provision of 310 CMR 10.25 through 10.35, 310 CMR 10.54 through 10.58, and 310 CMR 10.60, the Issuing Authority may issue an Order of Conditions permitting an Ecological Restoration Project listed in 310 CMR 10.53(4)(e) as an Ecological Restoration Limited Project and impose such conditions as will contribute to the interests identified in M.G.L. c. 131, § 40, provided that: The project is an Ecological Restoration Project as defined in 310 CMR 10.04 and is a project type listed below [310 CMR 10.53(4)(e)]. Dam Removal Freshwater Stream Crossing Repair and Replacement Stream Daylighting Tidal Restoration Rare Species Habitat Restoration Restoring Fish Passageways Other (describe project type): Removal of aquatic nuisance vegetation to retard pond eutrophication (310 CMR 10.53[4][e][5]) noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 6 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Inland Ecological Restoration Limited Project (310 CMR 10.53(4)) (cont.) General Eligibility Criteria for All Inland Ecological Restoration Limited Projects The project will further at least one of the WPA (M.G.L. c. 131, § 40) interests identified below. Protection of public or private water supply Protection of ground water supply Flood control Storm damage prevention Prevention of pollution Protection of land containing shellfish Protection of fisheries Protection of wildlife habitat If the project will impact an area located within estimated habitat which is indicated on the most recent Estimated Habitat Map of State-Listed Rare Wetlands, a NHESP preliminary written determination is attached to the NOI submittal that the project will have no adverse long-term and short-term effects on specified habitat sites of Rare Species or the project will be carried out in accordance with an approved NHESP habitat management plan. The project will be carried out in accordance with any time of year restrictions or other conditions recommended by the Division of Marine Fisheries for coastal waters and the Division of Fisheries and Wildlife in accordance with 310 CMR 10.11(3). If the project involves the dredging of 100 cubic yards of sediment or more or dredging of any amount in an Outstanding Resource Water, a Water Quality Certification has been applied for or obtained. The project complies with all applicable provisions of 310 CMR 10.53(1), (2), (7), and (8). noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 7 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Inland Ecological Restoration Limited Project (310 CMR 10.53(4)) (cont.) Additional Eligibility Criteria for Specific Inland Ecological Restoration Limited Project Types These additional criteria must be met to qualify as an Ecological Restoration Limited Project to ensure that the restoration and improvement of the natural capacity of a Resource Area to protect and sustain the interests identified in the WPA is necessary to achieve the project’s ecological restoration goals. This project application meets the eligibility criteria for Ecological Restoration Limited Project in accordance with [310 CMR 10.53(4)(a) through (d) and as proposed, furthers at least one of the WPA interests is for the project type identified below: Dam Removal Project is consistent with MassDEP’s 2007 Dam Removal Guidance. Freshwater Stream Crossing Repair and Replacement. The project as proposed and the NOI describes how: Meeting the eligibility criteria set forth in 310 CMR 10.13 would result in significant stream instability or flooding hazard that cannot otherwise be mitigated, and site constraints make it impossible to meet said criteria. The project design ensures that the stability of the bank is NOT impaired. To the maximum extent practicable, the project provides for the restoration of the stream upstream and downstream of the structure as needed to restore stream continuity and eliminate barriers to aquatic organism movement. The project complies with the requirements of 310 CMR 10.53(7) and (8). Stream Daylighting Projects The project meets the eligibility criteria for Ecological Restoration Limited Project [310 CMR 10.53(4)(a) through (d)] and as proposed the NOI describes how the proposed project meets to the maximum extent practicable, consistent with the project’s ecological restoration goals, all the performance standards for Bank and Land Under Water Bodies and Waterways. The project meets the requirements of 310 CMR 10.12(1) and (2) and a wildlife habitat evaluation is not included in the NOI. Tidal Restoration Project Restores tidal flow. the project, including any proposed flood mitigation measures, will not significantly increase flooding or storm damage to the built environment, including without limitation, buildings, wells, septic systems, roads or other man-made structures or infrastructure. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 8 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Inland Ecological Restoration Limited Project (310 CMR 10.53(4)) (cont.) Other Ecological Restoration Projects that meet the criteria set forth in 310 CMR 10.53 (4) (a) through (d). Restoration, enhancement, or management of Rare Species habitat. Restoration of hydrologic and habitat connectivity. Removal of aquatic nuisance vegetation to impede eutrophication. Thinning or planting of vegetation to improve habitat value. Riparian corridor re-naturalization. River floodplain re-connection. In-stream habitat enhancement. Fill removal and re-grading. Flow restoration. Installation of fish passage structures. Invasive species management. Other. Describe: This project involves the construction, repair, replacement or expansion of public or private infrastructure. (310 CMR 10.53(7)) The NOI attachment labeled is an operation and maintenance plan to ensure that the infrastructure will continue to function as designed. The operation and maintenance plan will be implemented as a continuing condition in the Order of Conditions and the Certificate of Compliance. This project replaces an existing stream crossing (310 CMR 10.53(8)). The crossing type: Replaces an existing non-tidal crossing designed to comply with the Massachusetts Stream Crossing Standards to the maximum extent practicable with details provided in the NOI. Replaces an existing tidal crossing that restricts tidal flow. The tidal restriction will be eliminated to the maximum extent practicable. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 9 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Eligibility Criteria - Inland Ecological Restoration Limited Project (310 CMR 10.53(4)) (cont.) At a minimum, in evaluating the potential to comply with the standards to the maximum extent practicable the following criteria have been consider site constraints in meeting the standard, undesirable effects or risk in meeting the standard, and the environmental benefit of meeting the standard compared to the cost, by evaluating the following: The potential for downstream flooding; Upstream and downstream habitat (in-stream habitat, wetlands); Potential for erosion and head-cutting; Stream stability; Habitat fragmentation caused by the crossing; The amount of stream mileage made accessible by the improvements; Storm flow conveyance; Engineering design constraints specific to the crossing; Hydrologic constraints specific to the crossing; Impacts to wetlands that would occur by improving the crossing; Potential to affect property and infrastructure; and Cost of replacement. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 10 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Required Actions (310 CMR 10.11) Complete the Required Actions before submitting a Notice of Intent Application for an Ecological Restoration Project and submit a completed copy of this Checklist with the Notice of Intent. Massachusetts Environmental Policy Act (MEPA) / Environmental Monitor https://www.mass.gov/service-details/the-environmental-monitor For Ecological Restoration Limited Projects, there are no changes to MEPA requirements. Submit written notification at least 14 days prior to the filing of a Notice of Intent (NOI) to the Environmental Monitor for publication. A copy of the written notification is attached and provides at minimum: A brief description of the proposed project. The anticipated NOI submission date to the conservation commission. The name and address of the conservation commission that will review the NOI. Specific details as to where copies of the NOI may be examined or acquired and where to obtain the date, time, and location of the public hearing. Massachusetts Endangered Species Act (MESA) /Wetlands Protection Act Review Preliminary Massachusetts Endangered Species Act Review from the Natural Heritage and Endangered Species Program (NHESP) has been met and the written determination is attached. Supplemental Information for Endangered Species Review has been submitted. 1. Percentage/acreage of property to be altered: a. Within Wetland Resource Area Percentage/acreage b. Outside Wetland Resource Area Percentage/acreage 2. Assessor’s Map or right-of-way plan of site 3. Project plans for entire project site, including wetland resource areas and areas outside of wetlands jurisdiction, showing existing and proposed conditions, existing and proposed tree/vegetation clearing line, and clearly demarcated limits of work. 4. Project description (including description of impacts outside of wetland resource area & buffer zone) 5. Photographs representative of the site 6. MESA filing fee (fee information available at https://www.mass.gov/how-to/how-to-file-for-a-mesa-project-review) noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 11 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Required Actions (310 CMR 10.11) (cont.) Make check payable to “Commonwealth of Massachusetts - NHESP” and mail to NHESP: Natural Heritage & Endangered Species Program MA Division of Fisheries & Wildlife 1 Rabbit Hill Road Westborough, MA 01581 7. Projects altering 10 or more acres of land, also submit: a. Vegetation cover type map of site b. Project plans showing Priority & Estimated Habitat boundaries OR Check One of the Following: 1. Project is exempt from MESA review. Attach applicant letter indicating which MESA exemption applies. (See 321 CMR 10.14, https://www.mass.gov/service-details/ma-endangered-species-act-mesa-overview; the NOI must still be sent to NHESP if the project is within estimated habitat pursuant to 310 CMR 10.37 and 10.59 – see C4 below) 2. Separate MESA review ongoing. a. NHESP Tracking # b. Date submitted to NHESP 3. Separate MESA review completed. Include copy of NHESP “no Take” determination or valid Conservation & Management Permit with approved plan. Estimated Habitat Map of State-Listed Rare Wetlands Wildlife If a portion of the proposed project is located in Estimated Habitat of Rare Wildlife as indicated on the most recent Estimated Habitat Map of State-Listed Rare Wetland Wildlife published by the Natural Heritage and Endangered Species Program (NHESP), complete the portion below. To view habitat maps, see the Massachusetts Natural Heritage Atlas or view the maps electronically at: https://www.mass.gov/guides/masswildlife-publications#-massachusetts-natural- heritage-atlas- A preliminary written determination from Natural Heritage and Endangered Species Program (NHESP) must be obtained indicating that: Project will NOT have long- or short-term adverse effect on the actual Resource Area located within estimated habitat indicated on the most recent Estimated Habitat Map of State-Listed Rare Wetlands Wildlife published by NHESP. Project will have long- or short-term adverse effect on the actual Resource Area located within estimated habitat indicated on the most recent Estimated Habitat Map of State- Listed Rare Wetlands Wildlife published by NHESP. A copy of NHESP’s written preliminary determination in accordance with 310 CMR 10.11(2) is attached. This specifies: Date of the map: noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 12 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Required Actions (310 CMR 10.11) (cont.) If the Rare Species identified is/are likely to continue to be located on or near the project, and if so, whether the Resource Area to be altered is in fact part of the habitat of the Rare Species. That if the project alters Resource Area(s) within the habitat of a Rare Species: The Rare Species is identified; NHESP’s recommended changes or conditions necessary to ensure that the project will have no short or long term adverse effect on the habitat of the local population of the Rare Species is provided; or An approved NHESP habitat management plan is attached with this Notice of Intent. Send the request for a preliminary determination to: Natural Heritage & Endangered Species Program MA Division of Fisheries & Wildlife 1 Rabbit Hill Road Westborough, MA 01581 Division of Marine Fisheries If the project will occur within a coastal waterbody with a restricted Time of Year, [see Appendix B of the Division of Marine Fisheries (DMF) Technical Report TR 47 “Marine Fisheries Time of Year Restrictions (TOYs) for Coastal Alteration Projects” dated April 2011 https://www.nae.usace.army.mil/Portals/74/docs/regulatory/StateGeneralPermits/MA/TR-47.pdf]. Obtain a DMF written determination stating: The proposed work does NOT require a TOY restriction. The proposed work requires a TOY restriction. Specific recommended TOY restriction and recommended conditions on the proposed work is attached. If the project may affect a diadromous fish run [re: Division of Marine Fisheries (DMF) Technical Reports TR 15 through 18, dated 2004: https://www.mass.gov/service-details/marine- fisheries-technical-reports] Obtain a DMF written determination stating: The design specifications and operational plan for the project are compatible with the passage requirements of the fish run. The design specifications and operational plan for the project are not compatible with the passage requirements of the fish run. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 13 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Required Actions (310 CMR 10.11) (cont.) Send the request for a written or electronic determination to: South Shore – Cohasset to Rhode Island border, and the Cape & Islands: Division of Marine Fisheries – South Coast Field Station Attn: Environmental Reviewer 836 South Rodney French Blvd. New Bedford, MA 02744 Email: DMF.EnvReview-South@state.ma.us North Shore – Hull to New Hampshire border: Division of Marine Fisheries – North Shore Field Station Attn: Environmental Reviewer 30 Emerson Avenue Gloucester, MA 01930 Email: DMF.EnvReview-North@state.ma.us Division of Fisheries and Wildlife – https://www.mass.gov/orgs/division-of-fisheries-and-wildlife Projects that involve silt-generating, in-water work that will impact a non-tidal perennial river or stream and the in-water work will not occur between May 1 and August 30. Obtain a written determination from the Division of Fisheries and Wildlife (DFW) as to whether the proposed work requires a TOY restriction. The proposed work does NOT require a TOY restriction. The proposed work requires a TOY restriction. The DFW determination with TOY restriction and other conditions is attached. MassDEP Water Quality Certification Project involves dredging of 100 cubic yards or more in a Resource Area or dredging of any amount in an Outstanding Resource Water (ORW). A copy and proof of the MassDEP Water Quality Certification pursuant to 314 CMR 9.00 is attached to the NOI. This project is a Combined Permit Application for 401 Dredging and Restoration (BRP WW 26). MassDEP Wetlands Restriction Order Is any portion of the site subject to a Wetlands Restriction Order under the Inland Wetlands Restriction Act (M.G.L. c. 131, § 40A) or the Coastal Wetlands Restriction Act (M.G.L. c. 130, § 105)? Yes No Department of Conservation and Recreation Office of Dam Safety For Dam Removal Projects, obtain a written determination from the Department of Conservation and Recreation Office of Dam Safety that the dam is not subject to the jurisdiction of the Office under 302 CMR 10.00, a written determination that the dam removal does not require a permit under 302 CMR 10.00 or a permit authorizing the dam removal in accordance with 302 CMR 10.00 has been issued. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 14 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Required Actions (310 CMR 10.11) (cont.) Areas of Critical Environmental Concern (ACECs) Is any portion of the proposed project within an Area of Critical Environmental Concern (ACEC)? Yes No If yes, provide name of ACEC (see instructions to WPA Form 3 or MassDEP Website for ACEC locations). Name of ACEC Minimum Required Documents (310 CMR 10.12) Complete the Required Documents Checklist below and provide supporting materials before submitting a Notice of Intent Application for an Ecological Restoration Project. This Notice of Intent meets all applicable requirements outlined in for Ecological Restoration Projects in 310 CMR 10.12. Use the checklist below to ensure that all documentation is included with the NOI. At a minimum, a Notice of Intent for an Ecological Restoration Project shall include the following: Description of the project’s ecological restoration goals; The location of the Ecological Restoration Project; Description of the construction sequence for completing the project; A map of the Areas Subject to Protection Under M.G.L. c. 131, § 40, that will be temporarily or permanently altered by the project or include habitat for Rare Species, Habitat of Potential Regional and Statewide Importance, eel grass beds, or Shellfish Suitability Areas. The method for BVW and other resource area boundary delineations (MassDEP BVW Field Data Form(s), Determination of Applicability, Order of Resource Area Delineation, etc.) is attached with documentation methodology. List the titles and dates for all plans and other materials submitted with this NOI. a. Plan Title b. Prepared by c. Signed and Stamped by d. Final Revision Date e. Scale f. Additional Plan or Document Title g. Date If there is more than one property owner, attach a list of these property owners not listed on this form. Attach NOI Wetland Fee Transmittal Form. noiappa.doc • rev 6/9/2021 Notice of Intent Appendix A: Ecological Restoration Limited Project Eligibility Checklists • Page 15 of 16 Massachusetts Department of Environmental Protection Bureau of Resource Protection - Wetlands WPA Form 3 – Notice of Intent Appendix A: Ecological Restoration Limited Project Checklists Massachusetts Wetlands Protection Act M.G.L. c. 131, §40 Provided by MassDEP: MassDEP File Number Document Transaction Number Barnstable City/Town Minimum Required Documents (310 CMR 10.12) An evaluation of any flood impacts that may affect the built environment, including without limitation, buildings, wells, septic systems, roads or other man-made structures or infrastructure as well as any proposed flood impact mitigation measures; A plan for invasive species prevention and control; The Natural Heritage and Endangered Species Program written determination in accordance with 310 CMR 10.11(2), if needed; Any Time of Year restrictions and/or other conditions recommended by the Division of Marine Fisheries or the Division of Fisheries and Wildlife in accordance with 310 CMR 10.11(3), (4), (5), if needed; Proof that notice was published in the Environmental Monitor as required by 310 CMR 10.11(1; A certification by the applicant under the penalties of perjury that the project meets the eligibility criteria set forth in 310 CMR 10.13; If the Ecological Restoration Project involves the construction, repair, replacement or expansion of infrastructure, an operation and maintenance plan to ensure that the infrastructure will continue to function as designed; If the project involves dredging of 100 cubic yards or more or dredging of any amount in an Outstanding Resource Water, a Water Quality Certification issued by the Department pursuant to 314 CMR 9.00; If the Ecological Restoration Project involves work on a stream crossing, information sufficient to make the showing required by 310 CMR 10.24(10) for work in a coastal resource area and 310 CMR 10.53(8) for work in an inland resource area; and If the Ecological Restoration Project involves work on a stream crossing, baseline photo-points that capture longitudinal views of the crossing inlet, the crossing outlet and the upstream and downstream channel beds during low flow conditions. The latitude and longitude coordinates of the photo-points shall be included in the baseline data. This project is subject to provisions of the MassDEP Stormwater Management Standards. A copy of the Stormwater Report as required by the Stormwater Management Standards per 310 CMR 10.05(6)(k)-(q) is attached. Provide information as the whether the project has the potential to impact private water supply wells including agricultural or aquacultural wells or surface water withdrawal points. Abutter Notification Materials NOTICE OF INTENT ABUTTER NOTIFICATION LETTER DATE: RE: Upcoming Barnstable Conservation Commission Public Hearing To Whom It May Concern, As an abutter within 100 feet of a proposed project, please be advised that a NOTICE OF INTENT application has been filed with the Barnstable Conservation Commission. APPLICANT: PROJECT ADDRESS OR LOCATION: ASSESSOR’S MAP & PARCEL: MAP PARCEL PROJECT DESCRIPTION: ________________________________________________________ APPLICANT’S AGENT: PUBLIC HEARING: WILL BE HELD REMOTELY VIA ZOOM See agenda posting on Town Clerks website available at least 48 hours in advance of the meeting for details. DATE: / / TIME: P.M. NOTE: Plans and applications describing the proposed activity are on file with the Conservation Commission at https://itlaserfiche.town.barnstable.ma.us/WebLink/Browse.aspx?id=825530&dbid=0&repo=TownOfBarns table, by email to Kimberly.Cavanaugh@town.barnstable.ma.us or by calling (508-862-4093) 226 & 227 8/19/2025 Red Lily Pond Project Association, Inc. Red Lily Pond and Lake Elizabeth Near 177 Centerville Ave, Centerville, MA Red Lily Pond Project Association is proposing to implement a vegetation management program using herbicides at Red Lily Pond and Lake Elizabeth to manage dense growths of nuisance aquatic plants. 6:30 9 2 2025 mproko@trccompanies.com 781-419-7703 TRC Morgan Proko Lake Elizabeth Red Lily Pond 226 -14 0-001 CND 226 -14 9 227 -14 6 227-036 226 -00 9 227-009 225 -00 6 246-022 226-147 226-136 226 -01 9 227 -13 1 227 -12 7 227 -12 5 226-148 227 -00 4 227 -13 0 227 -12 4 226-099 226-108 246-219 226-142 226-144 227 -12 8 226-193 226-145 227 -12 6 226 -18 2 227-042 226-106 226 -14 1 226 -02 4 227-145 227 -13 2 227 -12 2 226-187 246-220 226 -03 6 226 -09 4 226 -07 7 226-195 227-045 226 -07 4 226 -13 7 246-018 227-054 227 -13 3 247-041 227-043 226 -01 5 247-035 226-185 226-126 227-037 226-109 226-101 226 -04 0 226-133 226-178 226-129 226-186 226 -07 8 226-117 227-047 246-019 226 -02 7 226-132 226-096 226-131 226 -15 3 226 -02 6 227-044 226-095 226 -01 6 226-103 226 -03 0 226-134 227-157 226-110 226 -07 1 226 -02 3 227 -15 9 227-057 226 -02 2 227-053 247-036 226-180 226 -03 4 226 -15 2 227-055 226-125 226-179 227-049227-11 4 226-122 226-177 226-119 226-079 226-118 226 -05 8 227-050 227-051 226-124 226-112 226-114 227-097 247-040 246-012 226-107 226 -02 9 226-111 227-058 227-048 227 -16 0 226-156 227-056 247-034 246-023 226 -02 8 226-127 226-123 226 -03 5 226-113 226-115 247-033 226 -15 5 226-143 227-035 226 -02 0 226 -18 9 226 -07 6 225-028 226 -03 3 226-097 226-135-001 226-148-001 226-146-003 226-146-001 226-146-002 226-130-002 226-102-002 226-128-006 226-130-001 226-128-005 226-128-002 226-128-001 226-146-004 226-160 CND 246-006 226 -18 4 226-181226-04 2 226-100 226-120 226 -13 8 226 -09 1 226 -02 7 226 -03 9 246-010 226 -183 226 -09 8 226 -06 1 226 -01 8 227 -12 1 226-121 226 -04 1 226-116 227 -00 6 246-011 226 -09 3 226 -04 5 226 -15 4 247-032 226 -08 9 226 -09 0 226 -08 6 226 -03 8 226-104 227-052 226 -07 3 226 -06 5 227 -11 5 226-105 226 -04 7 226 -07 5 227-046 247-001 226 -03 7 226 -05 9 227-144 226 -06 2 226 -05 5 226 -04 8 226 -08 8 247-037 227 -13 4 226 -01 7 226 -04 3 226 -05 3 226 -08 5 226 -08 7 227 -00 7 227 -15 8 226 -04 9 245-009 226 -06 3 226 -05 1 226 -06 6 227 -00 8 226 -08 4 227-041 226 -08 2 226 -06 9 247-042 225-011 226 -06 4 226 -07 2 226 -05 6 226 -05 0 226 -06 0 226 -19 6 226 -13 9 246-017 225-03 4 226 -06 7 227-040 226 -05 4 226 -09 2 226 -031 226 -192 226 -07 0 226 -05 2 226 -06 8 246-009 227-039 247-039 227-038 226 -05 7 225 -00 1 246-007 247-031 226 -08 3 227-059 247-046 247-159 225-012 246-003 227-101 226-167226-168 226-161 226-163 226-162 226-164 226-165226-166 226-158 226-159 226-169 226-157 226-175 226-172 226-173 226-171 226-174 226-170 246-021-002 226-102-001 226-128-004 226 -07 5-001 226-128-003 226-140-002 246-021-001 226 -04 4-002 226 -08 6-001 226 -04 4-001 246-015-001 246-015-002 227 -00 8-001 100' N OI Buffer Abutters Conservation NOI Abutter List For Lake Elizabeth and Red Lily PondThis list by itself does NOT constitute a certified list of abutters and is provided only as an aid to the determination of abutters. The requestor of this list is responsible for ensuring the correct notification of abutters. Owner and address data taken from the Town of Barnstable Assessor's database on 7/23/2025Property owners within 100 ft. of the perimeter of work area. Mappar Owner1 Owner2 Address 1 City State Zip CountryAddress 2226015GAVITT, JULIA G TRJGG CRAIGVILLE NOMINE TRUST11 DROWNE PKWYRUMFORDRI02916226016GREENE, THOMAS M & STEPHANIE M TRS22 BUTLER AVENUE REALTY TRUST287 COMMONWEALTH AVE UNIT 3BOSTONMA02115226017KIRK, JAMES W JR TR24 GRANVILLE BAKER WAYPLYMPTONMA02367226023GREENE, JOHN J & BARBARA L TRSJ&B REALTY TRUST4 OLDE COACH ROADWESTBOROUGHMA0158122605099 LAKE ELIZABETH LLC28 SUMMERBELL AVECENTERVILLEMA02632226051105 LAKE ELIZABETH DRIVE LLC17 BURGEVIN STREETKINGSTONNY12401226052FARQUHAR,DOUGLAS B&THERESE-FRANKLIN, ANN1601 OLNEY-SANDY SPRING ROADSANDY SPRINGMD20860226053CRORY, ROBERT R & LAUREN C117 LAKE ELIZABETH DRIVECENTERVILLEMA02632226054GATES, BARBARA H & CLARK R TRSGATES HEWITT FAMILY TRUST8219 N FAIRWAY VIEW DRIVETUCSONAZ85742226055BROUILLARD, JOHN C & ELAINE F TRSBROUILLARD LIVING TRUST270 GREEN DUNES DRIVEWEST HYANNIS PORTMA02672226056DELANEY, RYAN TRDELANEY FAMILY NOMINEE TRUST41 LEDGEWOOD DRIVECOHASSETMA02025226057PARKE, AVIS-ANN S135 LAKE ELIZABETH DRIVECENTERVILLEMA02632226065WALTERS, GARY D & SUSAN B428 SAYRE DRIVEPRINCETONNJ08540Thursday, July 24, 2025Page 1 of 5 Mappar Owner1 Owner2 Address 1 City State Zip CountryAddress 2226066MATTHIJSSEN, JUDITH EPO BOX 2915 PROSPECT STREETPEAPACKNJ07977226071BARKSDALE, KENNETH P & LISA F947 SPERRY WAYSYKESVILLEMD21784226072BROWN, STEPHEN, ALICE, AMELIA & LISA TRSROBERTSON & MCLENNAN FAM TR II173 LAKE ELIZABETH DRIVECENTERVILLEMA02632226073HANSON, CANDACE & RAMSAY & EMERY ET ALPO BOX 783908WINTER GARDENFL34778226094CHRISTIAN CAMP MEETING ASSOC39 PROSPECT AVECENTERVILLEMA02632226095SCHUMACHER, KARL, ET AL61 LAWRENCE AVEDANBURYCT06810226096LANCASTER COTTAGE NOMINEE TRUSTC/O MARY E KIRK445 N ST SWWASHINGTONDC20024226097CHRISTIAN CAMP MEETING ASSOC39 PROSPECT AVECENTERVILLEMA02632226098CHRISTIAN CAMP MEETING ASSOC39 PROSPECT AVECENTERVILLEMA02632226099QUIRK, THOMAS V & DONNA N25 CHANNEL CENTER ST UNIT 208BOSTONMA02210226100BARNSTABLE, TOWN OF (CON)CONSERVATION COMMISSION230 SOUTH STREETHYANNISMA02601226101ONEIL, PATRICK TRL & V ONEIL IRREVOCABLE TRUST150 GIBB STREETSOMERSETMA02726226102001TYAGI, GIRISH & BHAVNA80 SPRUCE HILL RDWESTONMA02493226102002HAIG, STEPHEN H & JEAN H TRSSTEPHEN H HAIG 2024 FAM TR & JEAN H HAIG 2024 FAM TR247 SYLVIA STREETARLINGTONMA02476226103LOUKAS, RONALD & ELENA517 OLD CRAIGVILLE ROADCENTERVILLEMA02632226135001PENDERGAST, ANN D TRPENDERGAST MARIE AVE REALTY TRUSTPO BOX 576CENTERVILLEMA02632226136LEE, CHRISTINA A TRCHRISTOS V & MENI E DAFNOULELIS IR TRS17 IVEY ROADBELMONTMA02478226137CHRISTIAN CAMP MEETING ASSOC39 PROSPECT AVECENTERVILLEMA02632226138GAVITT, JULIA G TRJGG CRAIGVILLE NOMINEE TRUST11 DROWNE PKWYRUMFORDRI02916Thursday, July 24, 2025Page 2 of 5 Mappar Owner1 Owner2 Address 1 City State Zip CountryAddress 2226139PENDERGAST, ANN D TRANN D PENDERGAST 2000 REVOCABLE TRUSTPO BOX 576CENTERVILLEMA02632226140002ISENSTADT, SUZANNE A TRS A ISENSTADT TRUST3333 NE 32ND AVE APT 1106FORT LAUDERDALEFL3330822614000AFERRARO, PAUL780 CRAIGVILLE BEACH RD E-1CENTERVILLEMA0263222614000B1347 LLC1 THORNDAL CIRCLE3RD FLOORDARIENCT0682022614000C1347 LLC1 THORNDAL CIRCLEDARIENCT0682022614000DKARFOPOULOS, ALEXANDRA780 CRAIGVILLE BEACH ROAD UNIT A-4CENTERVILLEMA0263222614000ECLARK, JAMES M III TRHURLEY TRADE WINDS REALTY TRUSTPO BOX 190550C/O ARTHUR J HURLEY COMPANYBOSTONMA0211922614000FGLEYZER, GENE & TATIANA1 JOSEPH COMEE ROADLEXINGTONMA0242022614000GBRUZZESE, THOMAS ALDO & MARY GERALDINE TRSTHOMAS ALDO BRUZZESE LT & MARY GERALDINE BRUZZESE LT46 FORBES ROADWESTWOODMA0209022614000HGRIFFIN, LIAM K & AMY E29 CALLE VIVIANASAN CLEMENTECA9267322614000IGRIFFIN, LIAM & AMY29 CALLE VIVIANASAN CLEMENTECA9267322614000JTODD, GARY O TRJ&E REALTY TRUST780 CRAIGVILLE BEACH ROAD UNIT B-10CENTERVILLEMA0263222614000KKEIRSTEAD, KAREN S TRKAREN S KEIRSTEAD 2002 REV IOT300 STARBOARD LANEOSTERVILLEMA0265522614000LDOYLE, DONALD F & CONNIE J2 CASTLE ROADSHREWSBURYMA0154522614000NWASSERMAN, DAVID A & JESSICA L119 BROAD MEADOW ROADNEEDHAMMA0249222614000ODINEEN, PATRICIA J780 CRAIGVILLE BEACH RD U C2CENTERVILLEMA0263222614000PCHRONOPOULOS, DIONISIOS & KARLA27 COACHMAN LANENATICKMA01760Thursday, July 24, 2025Page 3 of 5 Mappar Owner1 Owner2 Address 1 City State Zip CountryAddress 222614000QDOHERTY, RYAN P & PENELOPE L53 CRONISER DRIVEHOPEWELL JUNCTIONNY1253322614000RTAYLOR, DANIEL R & MACKINNON, DARLENE3020 MUIRFIELD ROADCENTER VALLEYPA1803422614000SFOSTER, MARJORIE A & LISA L TRSSCOTT R FOSTER CREDIT SHELTER TRUST30 TUBWRECK DRIVEDOVERMA0203022614000TFAIRBANKS, J RICHARD JR & MICHELLE C780 CRAIGVILLE BEACH ROAD F1CENTERVILLEMA0263222614000UAMELLO, JASON A & LUCY P1700 BEACON STREETNEWTONMA0246822614000VMCCARRON, EUGENE H & DAMATO, EVE3133 POLO DRIVEGULF STREAMFL33483226152KUMAR, SANJAYA & KAUR, SHUBJEET TRSLAKE ELIZABETH DR REALTY TRUST4 ROCK SPRING LANESOUTHBOROUGHMA01772226154CROTEAU, DANIEL C & KATHRYN F22 JARVIS AVENUEHINGHAMMA02043-1312226184COUGHLIN, PATRICK K & KIMBERLY PICULLEL186 LAKE ELIZABETH DRIVECENTERVILLEMA02632226185MILLER, MARY ELLENPO BOX 1092BATTLE GROUNDWA98604226186MILLER, MARY ELLENPO BOX 1092BATTLE GROUNDWA98604226187GRIFFIN, SUZANNE MPO BOX 627WEST HYANNISPORTMA02672227036CHRISTIAN CAMP MEETING ASSOC39 PROSPECT AVECENTERVILLEMA02632227037LYONS, MICHAEL J & BRADY, KATHLEEN149 FAYEWEATHER ST.,#145CAMBRIDGEMA02138227042ELWORTHY, DAVID E & SUSAN5 RED LILY POND ROADCENTERVILLEMA02632227043LEVIT, NATASHA TRKLIMOV REALTY TRUST286 MARRETT ROADLEXINGTONMA02421227044SLIBY, EDWARD APO BOX 212EAST WALPOLEMA02032227045BRAGINSKY, INNA S & EDWARD A22 SILVER HILL RDWESTONMA02493Thursday, July 24, 2025Page 4 of 5 Mappar Owner1 Owner2 Address 1 City State Zip CountryAddress 2227046BARNSTABLE, TOWN OF (LDG)367 MAIN STREETHYANNISMA02601227047COMEAU, LEO JR & PATRICIA41 RED LILY POND ROADCENTERVILLEMA02632227048KEIRSTEAD, FREDERICK E & DENISE A11 FANEUIL ROADWALTHAMMA02154227097SHASTANY, DAVID P12 VISTA CIRCLEMASHPEEMA02649Thursday, July 24, 2025Page 5 of 5 226051 105 LAKE ELIZABETH DRIVE LLC 17 BURGEVIN STREET KINGSTON, NY 12401 22614000C 1347 LLC 1 THORNDAL CIRCLE DARIEN, CT 06820 22614000B 1347 LLC 1 THORNDAL CIRCLE 3RD FLOOR DARIEN, CT 06820 226050 99 LAKE ELIZABETH LLC 28 SUMMERBELL AVE CENTERVILLE, MA 02632 22614000U AMELLO, JASON A & LUCY P 1700 BEACON STREET NEWTON, MA 02468 226071 BARKSDALE, KENNETH P & LISA F 947 SPERRY WAY SYKESVILLE, MD 21784 226100 BARNSTABLE, TOWN OF (CON) CONSERVATION COMMISSION 230 SOUTH STREET HYANNIS, MA 02601 227046 BARNSTABLE, TOWN OF (LDG) 367 MAIN STREET HYANNIS, MA 02601 227045 BRAGINSKY, INNA S & EDWARD A 22 SILVER HILL RD WESTON, MA 02493 226055 BROUILLARD, JOHN C & ELAINE F TRS BROUILLARD LIVING TRUST 270 GREEN DUNES DRIVE WEST HYANNIS PORT, MA 02672 226072 BROWN, STEPHEN, ALICE, AMELIA & LISA TRS ROBERTSON & MCLENNAN FAM TR II 173 LAKE ELIZABETH DRIVE CENTERVILLE, MA 02632 22614000G BRUZZESE, THOMAS ALDO & MARY GERALDINE TRS THOMAS ALDO BRUZZESE LT & MARY GERALDINE BRUZZESE LT 46 FORBES ROAD WESTWOOD, MA 02090 226094 CHRISTIAN CAMP MEETING ASSOC 39 PROSPECT AVE CENTERVILLE, MA 02632 226097 CHRISTIAN CAMP MEETING ASSOC 39 PROSPECT AVE CENTERVILLE, MA 02632 226098 CHRISTIAN CAMP MEETING ASSOC 39 PROSPECT AVE CENTERVILLE, MA 02632 227036 CHRISTIAN CAMP MEETING ASSOC 39 PROSPECT AVE CENTERVILLE, MA 02632 226137 CHRISTIAN CAMP MEETING ASSOC 39 PROSPECT AVE CENTERVILLE, MA 02632 22614000P CHRONOPOULOS, DIONISIOS & KARLA 27 COACHMAN LANE NATICK, MA 01760 22614000E CLARK, JAMES M III TR HURLEY TRADE WINDS REALTY TRUST PO BOX 190550 C/O ARTHUR J HURLEY COMPANY BOSTON, MA 02119 227047 COMEAU, LEO JR & PATRICIA 41 RED LILY POND ROAD CENTERVILLE, MA 02632 226184 COUGHLIN, PATRICK K & KIMBERLY PICULLEL 186 LAKE ELIZABETH DRIVE CENTERVILLE, MA 02632 226053 CRORY, ROBERT R & LAUREN C 117 LAKE ELIZABETH DRIVE CENTERVILLE, MA 02632 226154 CROTEAU, DANIEL C & KATHRYN F 22 JARVIS AVENUE HINGHAM, MA 02043-1312 226056 DELANEY, RYAN TR DELANEY FAMILY NOMINEE TRUST 41 LEDGEWOOD DRIVE COHASSET, MA 02025 22614000O DINEEN, PATRICIA J 780 CRAIGVILLE BEACH RD U C2 CENTERVILLE, MA 02632 22614000Q DOHERTY, RYAN P & PENELOPE L 53 CRONISER DRIVE HOPEWELL JUNCTION, NY 12533 22614000L DOYLE, DONALD F & CONNIE J 2 CASTLE ROAD SHREWSBURY, MA 01545 227042 ELWORTHY, DAVID E & SUSAN 5 RED LILY POND ROAD CENTERVILLE, MA 02632 22614000T FAIRBANKS, J RICHARD JR & MICHELLE C 780 CRAIGVILLE BEACH ROAD F1 CENTERVILLE, MA 02632 226052 FARQUHAR,DOUGLAS B&THERESE-FRANKLIN, ANN 1601 OLNEY-SANDY SPRING ROAD SANDY SPRING, MD 20860 22614000A FERRARO, PAUL 780 CRAIGVILLE BEACH RD E-1 CENTERVILLE, MA 02632 22614000S FOSTER, MARJORIE A & LISA L TRS SCOTT R FOSTER CREDIT SHELTER TRUST 30 TUBWRECK DRIVE DOVER, MA 02030 226054 GATES, BARBARA H & CLARK R TRS GATES HEWITT FAMILY TRUST 8219 N FAIRWAY VIEW DRIVE TUCSON, AZ 85742 226015 GAVITT, JULIA G TR JGG CRAIGVILLE NOMINE TRUST 11 DROWNE PKWY RUMFORD, RI 02916 226138 GAVITT, JULIA G TR JGG CRAIGVILLE NOMINEE TRUST 11 DROWNE PKWY RUMFORD, RI 02916 22614000F GLEYZER, GENE & TATIANA 1 JOSEPH COMEE ROAD LEXINGTON, MA 02420 226023 GREENE, JOHN J & BARBARA L TRS J&B REALTY TRUST 4 OLDE COACH ROAD WESTBOROUGH, MA 01581 226016 GREENE, THOMAS M & STEPHANIE M TRS 22 BUTLER AVENUE REALTY TRUST 287 COMMONWEALTH AVE UNIT 3 BOSTON, MA 02115 22614000I GRIFFIN, LIAM & AMY 29 CALLE VIVIANA SAN CLEMENTE, CA 92673 22614000H GRIFFIN, LIAM K & AMY E 29 CALLE VIVIANA SAN CLEMENTE, CA 92673 226187 GRIFFIN, SUZANNE M PO BOX 627 WEST HYANNISPORT, MA 02672 226102002 HAIG, STEPHEN H & JEAN H TRS STEPHEN H HAIG 2024 FAM TR & JEAN H HAIG 2024 FAM TR 247 SYLVIA STREET ARLINGTON, MA 02476 226073 HANSON, CANDACE & RAMSAY & EMERY ET AL PO BOX 783908 WINTER GARDEN, FL 34778 226140002 ISENSTADT, SUZANNE A TR S A ISENSTADT TRUST 3333 NE 32ND AVE APT 1106 FORT LAUDERDALE, FL 33308 22614000D KARFOPOULOS, ALEXANDRA 780 CRAIGVILLE BEACH ROAD UNIT A-4 CENTERVILLE, MA 02632 227048 KEIRSTEAD, FREDERICK E & DENISE A 11 FANEUIL ROAD WALTHAM, MA 02154 22614000K KEIRSTEAD, KAREN S TR KAREN S KEIRSTEAD 2002 REV IOT 300 STARBOARD LANE OSTERVILLE, MA 02655 226017 KIRK, JAMES W JR TR 24 GRANVILLE BAKER WAY PLYMPTON, MA 02367 226152 KUMAR, SANJAYA & KAUR, SHUBJEET TRS LAKE ELIZABETH DR REALTY TRUST 4 ROCK SPRING LANE SOUTHBOROUGH, MA 01772 226096 LANCASTER COTTAGE NOMINEE TRUST C/O MARY E KIRK 445 N ST SW WASHINGTON, DC 20024 226136 LEE, CHRISTINA A TR CHRISTOS V & MENI E DAFNOULELIS IR TRS 17 IVEY ROAD BELMONT, MA 02478 227043 LEVIT, NATASHA TR KLIMOV REALTY TRUST 286 MARRETT ROAD LEXINGTON, MA 02421 226103 LOUKAS, RONALD & ELENA 517 OLD CRAIGVILLE ROAD CENTERVILLE, MA 02632 227037 LYONS, MICHAEL J & BRADY, KATHLEEN 149 FAYEWEATHER ST.,#145 CAMBRIDGE, MA 02138 226066 MATTHIJSSEN, JUDITH E PO BOX 291 5 PROSPECT STREET PEAPACK, NJ 07977 22614000V MCCARRON, EUGENE H & DAMATO, EVE 3133 POLO DRIVE GULF STREAM, FL 33483 226185 MILLER, MARY ELLEN PO BOX 1092 BATTLE GROUND, WA 98604 226186 MILLER, MARY ELLEN PO BOX 1092 BATTLE GROUND, WA 98604 226101 ONEIL, PATRICK TR L & V ONEIL IRREVOCABLE TRUST 150 GIBB STREET SOMERSET, MA 02726 226057 PARKE, AVIS-ANN S 135 LAKE ELIZABETH DRIVE CENTERVILLE, MA 02632 226139 PENDERGAST, ANN D TR ANN D PENDERGAST 2000 REVOCABLE TRUST PO BOX 576 CENTERVILLE, MA 02632 226135001 PENDERGAST, ANN D TR PENDERGAST MARIE AVE REALTY TRUST PO BOX 576 CENTERVILLE, MA 02632 226099 QUIRK, THOMAS V & DONNA N 25 CHANNEL CENTER ST UNIT 208 BOSTON, MA 02210 226095 SCHUMACHER, KARL, ET AL 61 LAWRENCE AVE DANBURY, CT 06810 227097 SHASTANY, DAVID P 12 VISTA CIRCLE MASHPEE, MA 02649 227044 SLIBY, EDWARD A PO BOX 212 EAST WALPOLE, MA 02032 22614000R TAYLOR, DANIEL R & MACKINNON, DARLENE 3020 MUIRFIELD ROAD CENTER VALLEY, PA 18034 22614000J TODD, GARY O TR J&E REALTY TRUST 780 CRAIGVILLE BEACH ROAD UNIT B-10 CENTERVILLE, MA 02632 226102001 TYAGI, GIRISH & BHAVNA 80 SPRUCE HILL RD WESTON, MA 02493 226065 WALTERS, GARY D & SUSAN B 428 SAYRE DRIVE PRINCETON, NJ 08540 22614000N WASSERMAN, DAVID A & JESSICA L 119 BROAD MEADOW ROAD NEEDHAM, MA 02492 Project Narrative Red Lily Pond and Lake Elizabeth NOI Revised July 2025 1 1.0 Introduction TRC, on behalf of Red Lily Pond Project Association Inc. (RLPPA), has prepared this Notice of Intent application for the Barnstable Conservation Commission regarding the proposed vegetation management program at Red Lily Pond and Lake Elizabeth. The Project Locus is shown in Figure 1.Red Lily Pond and Lake Elizabeth are both visible from the causeway located just west of 134 Centerville Avenue. Although there is no improved public access, the two waterbodies can be accessed via a short embankment on either side of Centerville Avenue in this area. Red Lily Pond and Lake Elizabeth suffer from nuisance growth of aquatic plant species, which is currently impairing the open water habitat of the waterbody, impacting fish and wildlife habitat, and decreasing water quality and aesthetics. Management of nuisance plant growth at Red Lily Pond and Lake Elizabeth is intended to address the following goals: •Restore aquatic habitat and ecological function of the waterbody •Improve water quality and aesthetics •Expand recreational opportunity for non-motorized watercraft. RLPPA is seeking an Order of Conditions from the Conservation Commission of the Town of Barnstable so that they may proceed with the management actions proposed in this Notice of Intent narrative. Under this Notice of Intent, the proposed management actions to control the growth of the nuisance plant species in Red Lily Pond and Lake Elizabeth include herbicide treatment. Since the proposed restoration actions will occur within a jurisdictional wetland resource area, this filing is made pursuant to the Massachusetts Wetlands Protection Act (WPA) (M.G.L. c. 131 §40) and its implementing regulations (310 CMR 10.00). 2.0 Existing Conditions Red Lily Pond and Lake Elizabeth are an approximately 10.8-acre waterbody complex located in Centerville, Massachusetts. The shoreline of Red Lily Pond and Lake Elizabeth is primarily surrounded by developed (primarily residences) and semi-wooded areas. A culvert under Centerville Avenue connects Lake Elizabeth to Red Lily Pond. Aquatic plant mapping of Red Lily Pond and Lake Elizabeth conducted by TRC in September 2024 documented nineteen aquatic plant species, one of which (common reed [Phragmites australis]) is an exotic invasive species (Table 1 and Attachment A). At least eight additional aquatic plant species have been observed by others (Wagner pers.comm.), including seven in Red Lily Pond and six in Lake Elizabeth (Table 1). Of note, one of the species previously observed in Lake Elizabeth is an exotic invasive species (swollen bladderwort [Utricularia inflata]). Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 2 Table 1. Aquatic Plant Species Observed at Red Lily Pond and Lake Elizabeth Common Name Scientific Name Growth Habit Status Red Lily Pond Lake Elizabeth Arrowhead Sagittaria sp. Emergent Native Y N Bladderwort, Lesser Utricularia minor Floating/ Submerged* Native Y Y Bladderwort, Purple Utricularia purpurea Floating/ Submerged* Native N Y Cattail, Broad- Leaved Typha latifolia Emergent Native N Y Common Reed Phragmites australis Emergent Exotic Y Y Coontail Ceratophyllum demersum Floating/ Submerged* Native Y N Little Floating Heart Nymphoides cordata Floating-leaved Native N Y Naiad, Southern Najas guadalupensis Submerged Native Y N Pickerelweed Pontederia cordata Emergent Native Y Y Pondweed, Berchtold’s Potamogeton berchtoldii Submerged Native Y Y Pondweed, Floating-leaf Potamogeton epihydrus Floating-leaved Native Y N Pondweed, Robbins’ Potamogeton robbinsii Submerged Native Y Y Quillwort Isoetes sp. Submerged Native Y N Swamp Loosestrife Decodon verticillatus Emergent Native Y Y Sedge, Undetermined Cyperaceae Emergent Native Y Y Water Lily, White Nymphaea odorata Floating-leaved Native Y Y Water Lily, Yellow Nuphar variegata Floating-leaved Native N Y Watershield Brasenia schreberi Floating-leaved Native N Y Waterweed Elodea sp. Submerged Native N Y Total Observed by TRC 13 14 Additional Species Previously Observed by Ken Wagner (personal communication) Bladderwort, Common Utricularia vulgaris Floating/ Submerged* Native Y Y Bladderwort, Swollen Utricularia inflata Floating/ Submerged* Exotic N Y Bulrush Schoenoplectus tabernaemontani Emergent Native Y Y Duckweed Lemna minor Floating Native Y N Hedge-hyssop, Clammy Gratiola neglecta Emergent Native Y Y Naiad, Slender Najas flexilis Submerged Native Y N Seven-Angled Pipewort Eriocaulon aquaticum Emergent Native Y Y Spikerush Eleocharis acicularis Emergent Native Y Y Total Additional 7 6 *Plant is unrooted and may be found near the surface of the water column or on bottom sediments Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 3 The entirety of Red Lily Pond and Lake Elizabeth support aquatic plant cover to some degree. Although each water body contained areas of low to moderate density growth, the majority (59%) of the combined area consisted of dense to very dense beds in September 2024. The percentage of the water bodies with dense to very dense beds would be expected to be even higher during the period of peak aquatic vegetation development in July/August. Red Lily Pond and Lake Elizabeth are not designated as an Outstanding Resource Water (ORW) and are not located in an Area of Critical Environmental Concern (ACEC). Red Lily Pond and Lake Elizabeth are not a public drinking water supply and are not located in a Zone A, B, or C Surface Water Protection Area or mapped Zone I, Zone II, or Interim Wellhead Protection Area. 2.1 Wetland Resource Areas Several areas subject to protection under the WPA are in and around Red Lily Pond and Lake Elizabeth, including Inland Bank, Bordering Vegetated Wetland (BVW), Land Under Water (LUW), 100-foot buffer zone, and 200-foot Riverfront Area (Figure 2). The approximate boundaries of these resource areas were determined based on aerial imagery interpretation and a review of publicly available geospatial data layers published by MassGIS. Inland Bank Inland Bank is defined at 310 CMR 10.54 as the land which contains water within a waterbody or waterway and is located between the mean annual low water level and the mean annual high- water level of a waterbody or waterway. When Bordering Vegetated Wetland (BVW) is present, Inland Bank is located between the LUW and the BVW. Inland Bank provides habitat for vegetation and a variety of animals, including small mammals, reptiles, and amphibians. There is approximately 5,975 linear feet of inland bank around Red Lily Pond and Lake Elizabeth. No alteration of or impacts to the Inland Bank are anticipated. Bordering Vegetated Wetland Per 310 CMR 10.55, BVW are freshwater wetlands which border on creeks, rivers, streams, ponds and lakes. The types of freshwater wetlands are wet meadows, marshes, swamps and bogs. Bordering Vegetated Wetlands are areas where the soils are saturated and/or inundated such that they support a predominance of wetland indicator plants. A freshwater emergent BVW is located along the northern and western portion of Red Lily Pond, and a small section on the eastern side of Lake Elizabeth. No alteration of or impacts to BVW are anticipated. Land Under Water Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 4 Per 310 CMR 10.56, LUW is the land which occurs below the mean annual low water level of a waterbody, which provides substrate for aquatic plant growth and habitat for aquatic animals. The areas within Red Lily Pond and Lake Elizabeth that occur below the mean annual low water level are considered LUW. There is approximately 462,080 square feet of LUW located within Red Lily Pond and Lake Elizabeth. The proposed project will beneficially impact the LUW of Red Lily Pond and Lake Elizabeth through the control of exotic invasive and thinning of nuisance plant growth, which currently dominate the LUW resource area and has inhibited the waterbody’s open water habitat. Reduction of this excessive aquatic plant growth will also improve dissolved oxygen by enhancing wind- driven circulation and mixing. Buffer Zones The Inland Bank of Red Lily Pond and Lake Elizabeth and nearby BVWs have an associated 100- foot buffer zone under the WPA. No impacts to the 100-foot buffer zone are proposed. 2.2 State-listed Species Based on a review of current Massachusetts Natural Heritage and Endangered Species Program (NHESP) data, Red Lily Pond and Lake Elizabeth are not located within mapped Priority Habitats of Rare Species or Estimated Habitats of Rare Wildlife. 3.0 Project Description RLPPA is seeking approval from the Barnstable Conservation Commission for chemical control of exotic invasive and nuisance aquatic plant growth. This is anticipated to build on prior and ongoing efforts to manage these plants using physical control measures (i.e., hand harvesting and benthic barriers). The open water habitat at Red Lily Pond and Lake Elizabeth has been impacted over time by exotic invasive and nuisance aquatic plant growth; specifically, common reed, watershield, yellow water lily, white water lily, and bulrush. These species have covered over most of the open water habitat in Red Lily Pond and Lake Elizabeth. Floating leaved plants such as water lilies and watershield create shading and reduce the ability for oxygen to be incorporated into the water column; therefore, reducing diffusion of oxygen in the water and lowering dissolved oxygen levels. Common reed can quickly invade areas of shallow water through stolons and rhizomes. As these grow and spread, they locally enhance deposition of sediments, thereby creating more favorable conditions for their continued expansion into the pond. RLPPA desires to implement an in-pond management program that will include herbicide applications to control excessive growth of these plants and to help preserve the remaining open water habitat in Red Lily Pond and Lake Elizabeth. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 5 Swollen bladderwort also inhabits Lake Elizabeth but is unrooted and easier to control at this time using hand harvesting. Therefore, swollen bladderwort is not currently targeted by the herbicide proposed treatment program at its current extent. However, should it continue to expand to the point where it cannot be controlled by hand harvesting, it could be controlled by imazamox (trade name Clearcast). Initial management actions will be preceded by a pre-treatment aquatic plant survey of Red Lily Pond and Lake Elizabeth, with a post-treatment survey typically scheduled for late summer or early autumn, depending on when treatment has concluded. The areas currently anticipated for treatment are depicted in Figure 3. These areas are targeted to address portions of the waterbodies with higher nuisance plant density while avoiding the locations of existing or planned benthic barriers. However, treatment areas over the multi-year course of this program will be adjusted based on annual mapping. The specific management techniques to be employed each year will be based on aquatic plant surveys of the waterbody conducted prior to treatment. The proposed management actions are described in more detail in the following sections. 3.1 Herbicide Treatments In the short-term, herbicide treatment is usually the most cost-effective means by which to achieve the goal of reducing aquatic weed biomass over a large area. In some cases, they are also the only practical method to provide meaningful control of large areas of nuisance vegetation. At Red Lily Pond and Lake Elizabeth, RLPPA is already using hand harvesting and benthic barriers to provide limited control of small areas of excessive plant growth. However, following extensive effort using these methods, it has become clear that herbicide treatments will be necessary to gain more substantial and sustainable control. Herbicides may also be used over the long-term as part of a comprehensive management plan to spot-treat areas of recurring infestations that are not readily controllable through other means. The Applicant is seeking approval for the use of the herbicides below to target nuisance aquatic plant growth in Red Lily Pond and Lake Elizabeth. Herbicide product labels are included in this filing as Attachment A. In all cases, herbicides would only be applied to Red Lily Pond and Lake Elizabeth by a Massachusetts-licensed herbicide applicator in strict accordance with the product label and only after obtaining a License to Apply Herbicide from MassDEP. •Imazamox: Imazomox (trade name Clearcast) is a systemic herbicide that acts as an acetolactate synthase inhibitor. Imazamox is readily translocated from the leaves to the rest of the plant and, as such, can be highly effective on target species at low concentrations. This herbicide is effective on many of the targeted exotic and nuisance, floating-leaved and emergent plant species when applied as a foliar spray. •Glyphosate: Glyphosate (trade name examples include AquaPro or Rodeo) is a broad- spectrum, systemic herbicide that is effective on aquatic plants with floating or emergent leaves but has little effect on submerged species. Although glyphosate is a broad- spectrum herbicide, careful application as a foliar spray (or as a direct application to cut Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 6 stems of common reed) effectively allows it to be selective for floating-leaf or emergent plants in the immediate treatment area with little effect on non-target submerged native plants or other aquatic life. Typically, treatments would be applied in a series of two visits – one initial visit in early to mid- summer to treat the majority of the target area and a second visit within a few weeks to treat the plants that were too wet to treat during the first visit (i.e., due to passage of the treatment vessel). Common reed would typically be treated later in the season, as it responds best to treatment near the end of the growing season (i.e., August to October). The treatment may need to be repeated during a subsequent growing season depending on herbicide effectiveness and plant regrowth. Direct access to Red Lily Pond and Lake Elizabeth is discouraged on the day of treatment as standard practice, although label restrictions do not require this. Red Lily Pond and Lake Elizabeth will also be posted by the herbicide applicator prior to treatment in accordance with the label requirements and the License to Apply Herbicides to Waters of the Commonwealth (BRP WM 04). 4.0 Impact Avoidance and Minimization The work for the proposed project will take place within LUW. No work is proposed to occur in the Inland Bank, BVW, or 100-foot buffer zone. 4.1 Herbicide Treatments The herbicides proposed for use at Red Lily Pond and Lake Elizabeth include the aquatic formulations of imazamox and glyphosate that have been approved for use in Massachusetts waters by Massachusetts Department of Agricultural Resources (MDAR), MassDEP, and the United States Environmental Protection Agency (EPA). The herbicide would only be applied by a Massachusetts-licensed herbicide applicator with a valid License to Apply Herbicides issued by MassDEP. Treatment work will be completed entirely by small watercraft or wading in very shallow locations. Therefore, no new water body access locations or access improvements are anticipated to be necessary. Herbicide application will be conducted strictly in accordance with the product labels and safety data sheets, using the minimum effective dose to achieve the desired control of target species (Attachment B). The LUW resource area will be beneficially impacted through the management of nuisance aquatic plant species. Management of exotic invasive and nuisance species will create additional habitat for other, less aggressive members of the existing native plant assemblage, which will improve water quality and provide higher quality wildlife habitat. Notice of herbicide application will be posted by the herbicide applicator prior to treatment. There are no restrictions for use of a recreational waterbody following treatment with any of the herbicides proposed for use at the waterbody; however, the herbicide applicator may post the waterbody to discourage recreation on the day of herbicide treatment as standard practice. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 7 Treatments will also take into consideration the time of year restrictions on Red Lily Pond and Lake Elizabeth for the protection of diadromous fish species, which are March 15 to June 30, and September 1 to November 15 (Evans et al. 2015). Spray treatments will only be applied during the July 1 to August 31 period to avoid impacting these species during restricted times of year. If treatments are required during the restricted times of year, these will be applied directly to the target species leaves or cut stems to avoid or minimize introduction of herbicides to the water column. Currently, the only potential time of year incursion reasonably foreseen would be for treatment of small colonies of common reed, which responds more favorably to treatment late in the season. Since common reed is a large emergent species, these treatments can be applied to the plants with minimal opportunity for herbicide product to contact the water. 4.2 Monitoring Program In order to guide implementation of the aquatic vegetation herbicide management program and assess the impact to target and non-target plants, the Applicant proposes to complete an annual aquatic plant mapping program in Red Lily Pond and Lake Elizabeth. The mapping will be conducted at least once each year. In years when herbicide treatments are applied, mapping will consist of a pre-treatment and post-treatment event. Since the Red Lily Pond and Lake Elizabeth system is also known to host diadromous fish species, including alewife and American eel (Attachment C), the Applicant proposes to undertake a water quality monitoring program to track water quality prior to and after herbicide treatments. The program has been designed to align with Division of Marine Fisheries guidance (Sheppard and Chase 2021) and the locations of the site-specific river herring habitat assessment previously completed by Division of Marine Fisheries from 2013 to 2014. Water quality monitoring parameters will include dissolved oxygen, temperature, pH, and turbidity collected at one-meter vertical increments at all stations (Table 2). Water clarity (Secchi disk) may be measured in lieu of turbidity where water depth is sufficient to support this. Additionally, herbicide residue testing will be completed at one location in each water body, as well as a downstream station in the outlet from Lake Elizabeth to the Centerville River. Table 2. Proposed Water Quality Monitoring Locations Water Body Station ID Lat Long Water Quality Parameters Herbicide Residue Notes Red Lily Pond RL1 41.64037 -70.33208 Yes No South pond. Aligns with DMF 2013- 2014 sampling location Red Lily Pond RL2 41.64162 -70.33072 Yes No Mid-pond. Aligns with DMF 2013- 2014 sampling location Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 8 Water Body Station ID Lat Long Water Quality Parameters Herbicide Residue Notes Red Lily Pond RL3 41.64291 -70.3302 Yes Yes North pond. Aligns with DMF 2013- 2014 sampling location Lake Elizabeth LE1 41.64006 -70.33235 Yes Yes Captures input from Red Lily Lake Elizabeth LE2 41.63922 -70.33347 Yes No Mid-pond Lake Elizabeth LE3 41.63869 -70.33269 Yes No Southeastern cove Tributary to Centerville River TC1 41.63780 -70.33372 Yes Yes Captures input from Lake Elizabeth Water quality data collection events will include the following: 1.Pre-treatment event conducted up to 48 hours prior to initial treatment; 2.Post-treatment events conducted at the following intervals (approximate and subject to minor deviation based on weather and calendar limitations) after initial treatment: a.1 day b.2 days c.5 days d.7 days e.14 days f.21 days For herbicide residue monitoring, sampling will be discontinued if the results for all locations test below the laboratory detection limit for two consecutive events. However, other water quality parameters will continue to be measured for the full duration of the post-treatment sampling program. A monitoring report will be submitted to the Barnstable Conservation Commission and the Division of Marine Fisheries during each year in which treatments are applied. The report will be submitted by December 31. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 9 5.0 Regulatory Compliance The WPA (M.G.L. c. 131, § 40) and its implementing regulations (310 CMR 10.00) provide for the protection of wetland resource areas and the public benefits provided by these areas as identified by the Act. The proposed project is subject to the WPA and its implementing regulations because it will take place within the LUW associated with Red Lily Pond and Lake Elizabeth, which is subject to protection under the WPA. 5.1 Ecological Restoration Limited Project Provisions The primary purpose of the proposed project is to restore the natural capacity of a wetland resource area, specifically the LUW, to prevent unhealthy waterbody conditions, protect wildlife habitat, and promote normal levels of native species growth, which are interests identified in the WPA in M.G.L. c. 131 §40. This project is therefore eligible to be reviewed as an Ecological Restoration Limited Project pursuant to 310 CMR 10.53(4)(e)(5): Other Restoration Projects. Pursuant to 310 CMR 10.11(1), at least two weeks prior to filing an NOI for an Ecological Restoration Limited Project, the Applicant must submit written notification of the proposed filing for publication in the Environmental Monitor. In accordance with this provision, notice was provided to the Massachusetts Environmental Policy Act (MEPA) office on November 15, 2024 (Attachment D). This project has been designed to be consistent with the Eutrophication and Aquatic Plant Management Final Generic Environmental Impact Report (EEA 2004a) and The Practical Guide to Lake and Pond Management in Massachusetts (EEA 2004b). Projects seeking review as Ecological Restoration Limited Projects must comply with the provisions in 310 CMR 10.53(4)(a). The project’s compliance with these provisions is discussed below. 310 CMR 10.53(4)(a)(1): The Issuing Authority determines that the project is an Ecological Restoration Project as defined in 310 CMR 10.04. The term “Ecological Restoration Project” is defined in 310 CMR 10.04 as “a project whose primary purpose is to restore or otherwise improve the natural capacity of a Resource Area(s) to protect and sustain the interests identified in M.G.L. c. 131, § 40, when such interests have been degraded or destroyed by anthropogenic influences.” As stated in Section 1.0, one of the goals of this project is to improve the natural capacity of the resource area to improve water quality and protect fish and wildlife habitat through management of nuisance aquatic plant species. Therefore, the project meets the definition of an Ecological Restoration Project under 310 CMR 10.04. 310 CMR 10.53(4)(a)(2): If the project will impact an area located within estimated habitat which is indicated on the most recent Estimated Habitat Map of State-listed Rare Wetlands Wildlife published by the Natural Heritage and Endangered Species Program (Program), the applicant has obtained a preliminary written determination from the Program in accordance with 310 CMR 10.11(2) that the project will not have any adverse long-term and short-term effects on specified Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 10 habitat sites of Rare Species, or the project will be carried out in accordance with a habitat management plan that has been approved in writing by the Natural Heritage and Endangered Species Program and submitted with the Notice of Intent. The project will not impact an area located within estimated habitat. As stated in Section 2.2, there are no mapped estimated habitats located at Red Lily Pond or Lake Elizabeth. 310 CMR 10.53(4)(a)(3): The applicant demonstrates that the project will be carried out in accordance with any time of year restrictions or other conditions recommended by the Division of Marine Fisheries for coastal waters and the Division of Fisheries and Wildlife in accordance with 310 CMR 10.11(3). The proposed project is located in coastal waters (310 CMR 10.11(3)) and is subject to time of year restrictions for alewife herring and American eel. These restrictions include the period s from March 15 through June 30, and September 1 through November 15. Division of Marine Fisheries was contacted, and an initial determination email was sent on December 11, 2024. The proposed project will not involve silt-generating, in water work that will impact a non-tidal perennial river or stream (310 CMR 10.11(5)). 310 CMR 10.53(4)(a)(4): If the project involves the dredging of 100 cubic yards of sediment or more or dredging of any amount in an Outstanding Resource Water, the applicant has applied for or obtained a Water Quality Certification by the Department. The project does not involve dredging. 310 CMR 10.53(4)(a)(5): The project complies with all applicable provisions of 310 CMR 10.53(1), (2), (7), and (8). 310 CMR 10.53(1) states in part: “If the Issuing Authority determines that a Resource Area is significant to an interest identified in M.G.L. c. 131, § 40 for which no presumption is stated in the Preamble to the applicable section, the Issuing Authority shall impose such conditions as are necessary to contribute to the protection of such interests. … ” The Applicant will comply with all conditions imposed on the project by the Issuing Authority. 310 CMR 10.53(2) states: “When the site of a proposed project is subject to a Restriction Order which has been duly recorded under the provisions of M.G.L. c. 131, § 40A, such a project shall conform to both the provisions contained in that Order and 310 CMR 10.51 through 10.60.” The project site is not subject to a Wetlands Restriction Order. 310 CMR 10.53(7) states: “The Notice of Intent for any projects involving the construction, repair, replacement or expansion of public or private infrastructure shall include an operation and Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 11 maintenance plan to ensure that the infrastructure will continue to function as designed. Implementation of the operation and maintenance plan as approved by the Issuing Authority shall be a continuing condition that shall be set forth in the Order of Conditions and the Certificate of Compliance.” The proposed project does not involve the construction, repair, replacement, or expansion of public or private infrastructure. 310 CMR 10.53(8) states: “Any person proposing the replacement of an existing stream crossing shall demonstrate to the Issuing Authority that the impacts of the crossing have been avoided where possible, and when not possible have been minimized and that mitigation measures have been provided to contribute to the protection of the interests identified in M.G.L. c. 131, § 40.” The project does not involve stream crossings. 5.2 Land Under Water The management actions proposed as part of this plan could potentially occur and impact the LUW anywhere in Red Lily Pond and Lake Elizabeth during the course of the management program. The activities described in this NOI do not entail the construction of structures, dredging or filling, or similar physical alterations to the land; therefore, the work will not impair the water carrying capacity within the defined channel. The project does not entail silt-generating work in surface waters, or new stormwater discharges to surface waters or groundwater. All products proposed for use have been approved by state and federal regulatory programs and will be used in accordance with label restrictions. Therefore, it is concluded that the activities described in this NOI will not impair the quality of surface water or groundwater. Control of exotic invasive and nuisance vegetation is expected to improve the capacity of the LUW resource area to protect the interests identified in the WPA, including prevention of pollution, and protection of fish and wildlife habitat. 5.3 Other Resource Areas As discussed in Section 2.2, the proposed work will not occur within or impact Bordering Vegetated Wetland, Inland Bank, or the 100-foot buffer zone. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth NOI Revised July 2025 12 5.4 Chapter 237, Wetlands Protection Ordinance of the Code of the Town of Barnstable The project is subject to the Town of Barnstable Conservation Commission Wetlands Protection Regulations and the Barnstable Wetlands Protection Ordinances However, Chapter 237 does not contain any additional performance standards that would be applicable to the project beyond those established by the WPA implementing regulations. In accordance with the Town’s Chapter 707 regulation, the “Requirements for a Notice of Intent Application” checklist is included as Attachment E of this NOI. 6.0 References [EEA] Commonwealth of Massachusetts, Executive Office of Environmental Affairs. 2004a. Eutrophication and Aquatic Plant Management Final Generic Environmental Impact Report. https://www.mass.gov/files/documents/2016/08/sd/eutrophication-and-aquatic-plant- management-in-massachusetts-final-generic-environmental-impact-report-mattson.pdf [EEA] Commonwealth of Massachusetts, Executive Office of Environmental Affairs. 2004b. The Practical Guide to Lake and Pond Management in Massachusetts: A Companion to the Final Generic Environmental Impact Report on Eutrophication and Aquatic Plant Management in Massachusetts. https://www.mass.gov/files/documents/2016/08/uk/practical-guide-no-pics.pdf [DMF] Massachusetts Division of Marine Fisheries. Unpublished. River Herring Spawning and Nursery Habitat Assessment Dataset for Red Lily Pond, Barnstable. 2013-2014. Evans, N. T. K. H. Ford, B. C. Chase, and J. J. Sheppard. 2015. Recommended Time of Year Restrictions (TOYs) for Coastal Alteration Projects to Protect Marine Fisheries Resources in Massachusetts. Massachusetts Division of Marine Fisheries, Technical Report TR-47. https://www.mass.gov/info-details/marine-fisheries-technical-reports Sheppard, J. and B. Chase. 2021. Herbicides (DMF guidance document for review of projects that propose to use herbicides to control aquatic vegetation in diadromous fish habitats within coastal watersheds). https://www.mass.gov/doc/herbicides-and-diadromous-fishes/download Plan Set Date: July 30, 2025 Figures CT NY RI MA VT NH ME Project Location DATE: APPROVED BY: CHECKED BY: DRAWN BY:PROJ. NO.: FILE: TITLE: PROJECT: 630229_REDLILYPOND_LAKEELIZABETH_JCCOORDINATE SYSTEM: NAD 1983 STATEPLANE MASSACHUSETTS MAINLAND FIPS 2001 FEET; MAP ROTATION: 0 -- SAVED BY: JCORSO ON 7/25/2025, 13:17:30 PM; FILE PATH: T:\1-PROJECTS\REDLILLYPONDPROJECTASSOCIATION\630229_PLANTMAPPING2024\2-APRX\630229_REDLILYPOND_LAKEELIZABETH_JC\630229_REDLILYPOND_LAKEELIZABETH_JC.APRX; LAYOUT NAME: FIG1_PROJECT LOCUS MAPJULY 2025 404 WYMAN STREET SUITE 375 WALTHAM, MA 02451 PHONE: 781.419.7696 F 1:24,000 1" = 2,000' 0 1,000 2,000 FEET BASE MAP: USGS NATIONAL MAP DATA SOURCES: TRC, USGS, ESRI M. PROKO J. FREDENBURG J. CORSO FIGURE 1 630229.0000.0000 PROJECT LOCUS MAP RED LILY POND AND LAKE ELIZABETH AQUATIC VEGETATION MANAGEMENT BARNSTABLE, MA Site Location Plan Set Date: July 30, 2025 CT NY RI MA VT NH ME Craigville Marshes Vine AveButler AveVine AveVineAveSummerbellAveRed Lily Pond Old Craigville RdRedLilyPond RdOc e an AveLakeElizabethDrSummerbell AveSummerbellAveSa rgent Ln HotelAve Circ u it R d R e gina CreekLake Elizabeth C ra ig vi ll e Be ac h R d Cen terville Ave Summerbell AveSummerbell AveLakeElizabeth DrMarie AveIrving StJackson AveOldCraigville Rd Raymond St Soundview R d Ce n t erv i lle A ve Perennial Stream Inland Bank Land Under Water (LUW) Bordering Vegetated Wetlands (BVW) 100-Foot Buffer Zone DATE: APPROVED BY: CHECKED BY: DRAWN BY:PROJ. NO.: FILE: TITLE: PROJECT: 630229_REDLILYPOND_LAKEELIZABETH_JCCOORDINATE SYSTEM: NAD 1983 STATEPLANE MASSACHUSETTS MAINLAND FIPS 2001 FEET; MAP ROTATION: 0 -- SAVED BY: JCORSO ON 7/25/2025, 13:17:30 PM; FILE PATH: T:\1-PROJECTS\REDLILLYPONDPROJECTASSOCIATION\630229_PLANTMAPPING2024\2-APRX\630229_REDLILYPOND_LAKEELIZABETH_JC\630229_REDLILYPOND_LAKEELIZABETH_JC.APRX; LAYOUT NAME: FIG2_WETLAND RESOURCESJULY 2025 404 WYMAN STREET SUITE 375 WALTHAM, MA 02451 PHONE: 781.419.7696 F 1:3,600 1" = 300' 0 150 300 FEET BASE MAP: GOOGLE WORLD IMAGERY DATA SOURCES: TRC, MASS DEP, ESRI M. PROKO J. FREDENBURG J. CORSO FIGURE 2 630229.0000.0000 WETLAND RESOURCES MAP RED LILY POND AND LAKE ELIZABETH AQUATIC VEGETATION MANAGEMENT BARNSTABLE, MA Site Location Plan Set Date: July 30, 2025 CT NY RI MA VT NH ME Craigville Marshes Vine AveButler AveVine AveVine AveSummerbell Ave Red Lily Pond Old Craigville RdRedLily Pond Rd Oc e an AveLake ElizabethDrSummerbell AveSummerbellAveSa rgent Ln Hote l Ave Circ u it R d R e gina CreekLake Elizabeth C ra ig vi ll e Be ac h R d Cen t e r v ille A v e Summerbell AveSummerbell AveLakeElizabeth DrMarie AveIrving StJackson AveOld Craigville Rd Raymond St Soundview R d Ce n t erv i l l e A v e Vegetation Management Area DATE: APPROVED BY: CHECKED BY: DRAWN BY:PROJ. NO.: FILE: TITLE: PROJECT: 630229_REDLILYPOND_LAKEELIZABETH_JCCOORDINATE SYSTEM: NAD 1983 STATEPLANE MASSACHUSETTS MAINLAND FIPS 2001 FEET; MAP ROTATION: 0 -- SAVED BY: JCORSO ON 7/25/2025, 13:17:30 PM; FILE PATH: T:\1-PROJECTS\REDLILLYPONDPROJECTASSOCIATION\630229_PLANTMAPPING2024\2-APRX\630229_REDLILYPOND_LAKEELIZABETH_JC\630229_REDLILYPOND_LAKEELIZABETH_JC.APRX; LAYOUT NAME: FIG3_VEGETATION MANAGEMENT AREASJULY 2025 404 WYMAN STREET S UITE 375 WALTHAM, MA 02451 PHONE: 781.419.7696 F 1:3,600 1" = 300' 0 150 300 FEET BASE MAP: GOOGLE WORLD IMAGERY DATA SOURCES: TRC, ESRI M. PROKO J. FREDENBURG J. CORSO FIGURE 3 630229.0000.0000 VEGETATION MANAGEMENT AREA MAP RED LILY POND AND LAKE ELIZABETH A QUATIC VEGETATION MANAGEMENT BARNSTABLE, MA Site Location Plan Set Date: July 30, 2025 Attachment A: Biological Assessment, Red Lily Pond and Lake Elizabeth Biological Assessment October 21, 2024 TRC Project No. 630229.0000.0000 Red Lily Pond and Lake Elizabeth Prepared For: Red Lily Pond Project Association, Inc. Centerville, MA 02632 Prepared By: TRC 404 Wyman Street, Suite 375 Waltham, MA 02845 Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment i TABLE OF CONTENTS 1.0 INTRODUCTION AND SETTING ....................................................................................1 2.0 BIOLOGICAL ASSESSMENT METHODS ......................................................................1 3.0 BIOLOGICAL ASSESSMENT RESULTS .......................................................................2 3.1 Aquatic Plant Cover and Biovolume ................................................................................... 2 3.2 Aquatic Plant Community .................................................................................................... 5 3.2.1 Common Reed ....................................................................................................... 6 3.2.2 Swamp Loosestrife ................................................................................................ 7 3.2.3 White Water Lily ..................................................................................................... 7 3.2.4 Yellow Water Lily.................................................................................................... 7 3.2.5 Watershield .......................................................................................................... 12 3.2.6 Other Native Species ........................................................................................... 12 3.3 Other Aquatic Life ............................................................................................................. 12 4.0 CONCLUSION .............................................................................................................. 17 TABLES Table 1. Aquatic Plant Species Observed at Red Lily Pond and Lake Elizabeth FIGURES Figure 1. Aquatic Plant Cover Figure 2. Aquatic Plant Biovolume Figure 3. Common Reed Beds Figure 4. Swamp Loosestrife Beds Figure 5. White Water Lily Beds Figure 6. Yellow Water Lily Beds Figure 7. Watershield Beds Figure 8. Arrowhead, Lesser Bladderwort, Purple Bladderwort, and Broad-leaved Cattail Figure 9. Coontail, Little Floating Heart, Southern Naiad, Pickerelweed Figure 10. Berchtold’s Pondweed, Floating-leaf Pondweed, Robbins’ Pondweed, Quillwort Figure 11. Sedge and Waterweed Plan Set Date: July 30, 2025 1.0 Introduction and Setting Red Lily Pond is an approximately 4.7-acre waterbody located in the village of Centerville, Massachusetts, which falls entirely within the municipal jurisdiction of the Town of Barnstable. Red Lily Pond is narrowly elongate in shape and shallow throughout (maximum depth less than 4 ft based on 2022 bathymetry surveys provided by the Red Lily Pond Project Association, Inc. [RLPPA]). This creates ideal conditions for the growth of aquatic plants across the entire pond. Other than a small wetland drainage mapped on the east side of the pond, Red Lily Pond has no mapped stream inlets and discharges southward directly to Lake Elizabeth via a culvert under Centerville Avenue. Lake Elizabeth is an approximately 6.1-acre waterbody located just downstream of Red Lily Pond and also within the Town of Barnstable. Lake Elizabeth is a broader basin and, although most of it is also less than 4 ft deep, the northeast portion of the lake is deeper and may reach depths in excess of 8 ft over small areas (based on 2022 bathymetry surveys provided by RLPPA). Lake Elizabeth discharges into a small unnamed stream on its southern end, which becomes a tidal tributary of the Centerville River after it crosses under Lake Elizabeth Drive. Red Lily Pond and Lake Elizabeth were added to the Massachusetts Great Ponds list in 2014, despite each individual basin being less than 10 acres in area. However, historical US Geological Survey (USGS) topographic maps from the 1800s depict Red Lily Pond and Lake Elizabeth as a single water body. Since 1942, the two basins have been depicted separately on USGS topographic maps, bisected by Centerville Avenue. The RLPPA currently manages aquatic vegetation in Red Lily Pond and Lake Elizabeth under previously issued Orders of Conditions from the Barnstable Conservation Commission. Management activities include the placement of benthic barriers to prevent aquatic plant growth in a narrow strip of Lake Elizabeth and active manual harvesting of aquatic vegetative biomass in both water bodies. In 2024, the RLPPA removed an estimated 15 tons of vegetation, roots, and muck from July 11 to July 16. TRC was contracted by RLPPA to conduct a one-day biological assessment of Red Lily Pond and Lake Elizabeth. The biological assessment was focused on the mapping of aquatic vegetation, although fish and wildlife were also noted through incidental observation. More details on methods and results of this assessment are provided in the following sections. 2.0 Biological Assessment Methods TRC conducted a thorough aquatic vegetation survey of the two water bodies on September 17, 2024 to map the extent of growth and develop a list of species present. Aquatic plant data were collected at discrete points, using a combination of plant rakes to assess submerged species and surface observations for floating, floating-leaved, and target emergent species. The data collected included vegetative community composition (species present), overall vegetative cover (areal percent coverage), and overall vegetative biovolume (three-dimensional percent growth in the water column). A total of 72 points were assessed during the field visit, including 38 in Red Lily Pond and 34 in Lake Elizabeth. At each point, aquatic plant species were identified. Cover and biovolume were classified into five categories, based on percentage of vegetative growth, as follows: Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 2 0% - No cover / no biovolume 1%-25% - Low cover / low biovolume 26%-50% - Moderate cover / moderate biovolume 51%-75% - Dense cover / high biovolume 76%-100% - Very dense cover / very high biovolume Water depth and substrate type were also recorded as observations allowed. Data were recorded using GPS with sub-meter accuracy. Additionally, TRC also collected incidental observations of fish and wildlife species observed using the water bodies on the date of our visit. 3.0 Biological Assessment Results 3.1 Aquatic Plant Cover and Biovolume The entirety of Red Lily Pond and Lake Elizabeth support aquatic plant cover to some degree. Although each water body contained areas of low to moderate density growth, the majority (59%) of the combined area consisted of dense to very dense beds (Figure 1). Aquatic plant biovolume, a measure of the three-dimensional extent of plant growth within the water column, was high to very high (i.e., plant material occupying more than 50% of the water column) in approximately 32% of the combined area of the two water bodies (Figure 2). In these areas, navigation by recreational watercraft becomes very challenging, due to the volume of plant material at or near the surface of the water column. Areas of dense to very dense aquatic vegetation in Lake Elizabeth. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 3 Figure 1. Aquatic Plant Cover Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 4 Figure 2. Aquatic Plant Biovolume Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 5 3.2 Aquatic Plant Community TRC documented a total of 19 aquatic plant species in Red Lily Pond and Lake Elizabeth (Table 1). Of these, 13 were observed in Red Lily Pond and 14 were observed in Lake Elizabeth. Although there was some overlap in the species observed, 11 species were exclusively found in only one water body. At least eight additional aquatic plant species have been observed by others (Wagner pers.comm.), including seven in Red Lily Pond and six in Lake Elizabeth (Table 1). Of note, one of the species previously observed in Lake Elizabeth is an exotic invasive species (swollen bladderwort [Utricularia inflata]). Table 1. Aquatic Plant Species Observed at Red Lily Pond and Lake Elizabeth Common Name Scientific Name Growth Habit Status Red Lily Pond Lake Elizabeth Arrowhead Sagittaria sp. Emergent Native Y N Bladderwort, Lesser Utricularia minor Floating/ Submerged* Native Y Y Bladderwort, Purple Utricularia purpurea Floating/ Submerged* Native N Y Cattail, Broad- Leaved Typha latifolia Emergent Native N Y Common Reed Phragmites australis Emergent Exotic Y Y Coontail Ceratophyllum demersum Floating/ Submerged* Native Y N Little Floating Heart Nymphoides cordata Floating-leaved Native N Y Naiad, Southern Najas guadalupensis Submerged Native Y N Pickerelweed Pontederia cordata Emergent Native Y Y Pondweed, Berchtold’s Potamogeton berchtoldii Submerged Native Y Y Pondweed, Floating-leaf Potamogeton epihydrus Floating-leaved Native Y N Pondweed, Robbins’ Potamogeton robbinsii Submerged Native Y Y Quillwort Isoetes sp. Submerged Native Y N Swamp Loosestrife Decodon verticillatus Emergent Native Y Y Sedge, Undetermined Cyperaceae Emergent Native Y Y Water Lily, White Nymphaea odorata Floating-leaved Native Y Y Water Lily, Yellow Nuphar variegata Floating-leaved Native N Y Watershield Brasenia schreberi Floating-leaved Native N Y Waterweed Elodea sp. Submerged Native N Y Total Observed by TRC 13 14 Additional Species Previously Observed by Ken Wagner (personal communication) Bladderwort, Common Utricularia vulgaris Floating/ Submerged* Native Y Y Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 6 Common Name Scientific Name Growth Habit Status Red Lily Pond Lake Elizabeth Bladderwort, Swollen Utricularia inflata Floating/ Submerged* Exotic N Y Bulrush Schoenoplectus tabernaemontani Emergent Native Y Y Duckweed Lemna minor Floating Native Y N Hedge-hyssop, Clammy Gratiola neglecta Emergent Native Y Y Naiad, Slender Najas flexilis Submerged Native Y N Seven-Angled Pipewort Eriocaulon aquaticum Emergent Native Y Y Spikerush Eleocharis acicularis Emergent Native Y Y Total Additional 7 6 *Plant is unrooted and may be found near the surface of the water column or on bottom sediments Most of the plants observed by TRC were native species, although one exotic invasive species (common reed [Phragmites australis]) was present. Additionally, several of the native species are large and aggressive plants that can grow to nuisance levels, including swamp loosestrife (Decodon verticillatus), white water lily (Nymphaea odorata), yellow water lily (Nuphar variegata), and watershield (Brasenia schreberi). Each of these species is described in more detail in the following sections. 3.2.1 Common Reed Common reed was present along the pond margins in both Red Lily Pond and Lake Elizabeth, covering a total of approximately 0.11 acres (Figure 3). This species was typically observed in small patches or as occasional stems growing up through woody shrubs or beds of other herbaceous emergent plants. However, common reed is an aggressive exotic species and colonies can be expected to spread rapidly via vigorous rhizomes. As an emergent plant that produces large volumes of biomass, common reed causes already shallow waters to fill in and become shallower, which in turn favors growth of more common reed. In ponds that are already very shallow, this can result in a rapid decrease of aquatic habitat and conversion to extensive monocultures of common reed. Common reed stems growing up through shoreline emergent and woody vegetation. The reddish vegetation in the foreground is swamp loosestrife. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 7 3.2.2 Swamp Loosestrife Swamp loosestrife was common along much of the shoreline of both water bodies, forming almost a continuous belt of impenetrable vegetation in some areas. Some disjointed beds of swamp loosestrife were also found away from the immediate shoreline in the shallow waters of Red Lily Pond. In total an estimated 0.89 acres of swamp loosestrife cover was observed (Figure 4). Although swamp loosestrife is a native species and generally considered beneficial to wildlife, it can dominate as a nuisance monoculture, severely constricting areas of open water in shallow ponds if not managed. 3.2.3 White Water Lily White water lily was the most abundant aquatic plant observed in both water bodies and formed particularly dense beds in portions of Lake Elizabeth (Figure 5). Between the two ponds, this species covered a total of approximately 8.5 acres. As an aggressive floating-leaved plant, white water lily can shade out submerged plants, thereby reducing aquatic habitat diversity and potentially resulting in decreased dissolved oxygen levels in the water column. These same characteristics make it an impediment to navigation, which can rise to nuisance levels in shallow ponds if not managed. 3.2.4 Yellow Water Lily Yellow water lily was found to be growing in small patches or loose beds over approximately 1 acre of Lake Elizabeth (Figure 6). Yellow water lily is a robust plant and its stems frequently arch out of the water, although its leaves are most typically found floating at the water’s surface. As with other aggressive floating-leaved plants, yellow water lily can shade out submerged plants, thereby reducing aquatic habitat diversity and potentially resulting in decreased dissolved oxygen levels in the water column. It is also an impediment to navigation and can grow to nuisance levels in shallow ponds if not managed. Mixed bed of watershield and white water lily in Lake Elizabeth. Note open water in right-center portion of background. This is associated with an existing benthic barrier. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 8 Figure 3. Common Reed Beds Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 9 Figure 4. Swamp Loosestrife Beds Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 10 Figure 5. White Water Lily Beds Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 11 Figure 6. Yellow Water Lily Beds Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 12 3.2.5 Watershield Watershield formed dense beds in portions of Lake Elizabeth but was mostly encountered as a co-dominant species among beds of white or yellow water lily. In total, watershield was mapped over approximately 2.7 acres of Lake Elizabeth (Figure 7). As with other aggressive floating- leaved plants, watershield can shade out submerged plants, thereby reducing aquatic habitat diversity and potentially resulting in decreased dissolved oxygen levels in the water column. It is also an impediment to navigation and can grow to nuisance levels in shallow ponds if not managed. 3.2.6 Other Native Species The distributions of the remaining 14 native species are presented in Figures 8 to 11. Some of these species were commonly observed while others were only found in a single location. However, none of these species were observed to be growing at nuisance levels. 3.3 Other Aquatic Life In addition to aquatic plants, TRC directly observed painted turtle (Chrysemys picta) and bluegill (Lepomis macrochirus) in both water bodies. Waterfowl included the resident species Canada Goose (Branta canadensis) and Mallard (Anas platyrhynchos). However, it is anticipated that several other water-dependent wildlife species make use of the aquatic habitat as well. This is likely to include amphibians, wading birds, waterfowl, other birds associated with small freshwater ponds, as well as other species of turtles and fish. Additionally, although beyond the scope of this study to inventory, the two water bodies are likely to support a variety of small or microscopic life, including zooplankton, phytoplankton, and aquatic macroinvertebrates such as snails, bivalves, crustaceans, insects, and worms. Clumps of filamentous green algae (Charophyceae) were observed growing in both water bodies on the day of the field assessment, although they were not widespread. While these algae can become a nuisance under favorable environmental conditions, they do not produce compounds that create a public health risk to humans. Cyanobacteria, many of which are capable of producing toxins, can present a public health risk when present at high levels. However, no visual evidence of cyanobacteria blooms were noted on the date of TRC’s visit. Growths of filamentous green algae in Red Lily Pond. They appear cloudy when fully submerged but form a cohesive clump when they reach the surface. Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 13 Figure 7. Watershield Beds Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 14 Figure 8. Arrowhead, Lesser Bladderwort, Purple Bladderwort, and Broad-leaved Cattail Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 15 Figure 9. Coontail, Little Floating Heart, Southern Naiad, Pickerelweed Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 16 Figure 10.Berchtold’s Pondweed, Floating-leaf Pondweed, Robbins’ Pondweed, Quillwort Plan Set Date: July 30, 2025 Red Lily Pond and Lake Elizabeth October 21, 2024 Biological Assessment 17 Figure 11. Sedge and Waterweed 4.0 Conclusion Although Red Lily Pond and Lake Elizabeth host a range of aquatic plants, a handful of aggressive, high biovolume plants dominate their waters. This results in monocultures or near- monocultures of over large portions of both water bodies. Beyond the obstruction of navigation, these monocultures also portend a loss of botanical diversity over time due to competition (particularly for light) and reduced water quality through the depression of dissolved oxygen levels in the water column. Additionally, nuisance level growths of these species will result in higher rates of organic sediment deposition, which in turn will encourage expansion of the most aggressive species, thereby creating a positive feedback loop and accelerated infilling of the water bodies. RLPPA has been managing the most aggressive species through physical controls (benthic barriers and manual harvesting), which has likely provided some net benefit to water quality, fish and wildlife habitat, and diversity of the aquatic plant community. However, while the positive impacts of these interventions are apparent, more will need to be done in future years to expand on the success to date and ensure sustained benefits. Plan Set Date: July 30, 2025 Attachment B: Herbicide Product Labels 1 For control of annual and perennial weeds and woody plants in natural and production (plantations), forests for site preparation, mid-rotation release treatments, timber stand improvement activities, noncrop sites including industrial sites, rights-of-way (including roadsides, electric utility and communication transmission lines, pipelines, railroads, airports), irrigation and drainage ditches, canals, reservoirs, natural areas (including wildlife management areas, wildlife openings, wildlife habitats and refuges, parks and recreational areas, campgrounds, trailheads and trails), rangeland, and in and around aquatic sites and wetlands; also for perennial grass release, and grass growth suppression and grazed areas on these sites. Avoid contact of herbicide with foliage, green stems, exposed non-woody roots or fruit of crops, desirable plants and trees, because severe injury or destruction may result. Active Ingredient: glyphosate† N-(phosphonomethyl)glycine, isopropylamine salt ..................53.8%Other Ingredients ............................................................................... 46.2%Total........................................................................................................100.0% †Contains 5.4 lbs. per gallon glyphosate, isopropylamine salt (4 lbs per gallon glyphosate acid). Keep Out of Reach of Children CAUTION ®TM Trademarks of Dow AgroSciences, DuPont or Pioneer and their affilitated companies or respective owners. Produced for: SePRO Corporation ∙ 11550 N. Meridian St. ∙ Ste. 600 ∙ Carmel, IN 46032 EPA Reg. No. 62719-324-67690 FPL20190625 PRECAUTIONARY STATEMENTS Hazards to Humans and Domestic Animals Harmful If Inhaled Avoid breathing spray mist. Remove contaminated clothing and wash before reuse. Wash thoroughly with soap and water after handling. PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear: •Long-sleeved shirt and long pants •Shoes plus socks. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. ENGINEERING CONTROLS When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS. USER SAFETY RECOMMENDATIONS Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. FIRST AID If inhaled: • Move person to fresh air. • If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. • Call a poison control center or doctor for further treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. In case of emergency endangering health or the environment involving this product, call INFOTRAC at 1-800-535-5053. ENVIRONMENTAL HAZARDS Do not contaminate water when cleaning equipment or disposing of equipment washwaters. Treatment of aquatic weeds can result in oxygen depletion or loss due to decomposition of dead plants. This oxygen loss can cause fish suffocation. In case of leak or spill, soak up and remove to a landfill. PHYSICAL OR CHEMICAL HAZARDS Spray solutions of this product should be mixed, stored and applied using only stainless steel, aluminum, fiberglass, plastic or plastic-lined steel containers. Do not mix, store or apply this product or spray solutions of this product in galvanized steel or unlined steel (except stainless steel) containers or spray tanks. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas, which may form a highly combustible gas mixture. This gas mixture could flash or explode, causing serious personal injury, if ignited by open flame, spark, welder’s torch, lighted cigarette or other ignition source. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying. This is an end-use product. SePRO Corporation does not intend and has not registered it for reformulation. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: •Coveralls •Chemical-resistant gloves made of any waterproof material •Shoes plus socks NON-AGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries or greenhouses. Keep people and pets off treated areas until spray solution has dried. STORAGE AND DISPOSAL Do not contaminate water, food, feed or seed by storage or disposal. Pesticide Storage: Store above 10°F (-12°C) to keep product from crystallizing. Crystals will settle to the bottom. If allowed to crystallize, place in a warm room 68°F (20°C) for several days to redissolve and roll or shake container or recirculate in mini-bulk containers to mix well before using. Pesticide Disposal: Wastes resulting from use of this product that cannot be used or chemically reprocessed should be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, state or local procedures. Nonrefillable containers 5 gallons or less: Container Handling: Nonrefillable container. Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake AquaPro® Herbicide continued GLYPHOSATE GROUP 9 HERBICIDE Plan Set Date: July 30, 2025 2 STORAGE AND DISPOSAL continued for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities. Product Information This product is a broad spectrum, systemic, postemergent herbicide with no soil residual activity. It is intended for control of annual and perennial weeds and woody plants and brush. It is formulated as a water soluble liquid. Time to Symptoms: The active ingredient in this product moves through the plant from the point of foliage contact to and into the root system. Visible effects are a gradual wilting and yellowing of the plant that advances to complete browning of above ground growth and deterioration of underground plant parts. Visible effects on most annual weeds occur within two to four days, but on most perennial weeds visible effects may not occur for seven days or more. Extremely cool or cloudy weather following treatment may slow the activity of this product and delay development of visual symptoms. Stage of Weeds: Annual weeds are easiest to control when they are small. Best control of most perennial weeds is obtained when treatment is made at late growth stages approaching maturity. Refer to the annual, perennial and woody brush and trees rate tables for specific weeds. Always use the higher rate within the rate range for heavy or dense weed growth or when weeds are growing in an undisturbed (noncultivated) area. When treating weeds with disease or insect damage, weeds heavily covered with dust, or weeds under poor growing conditions, reduced weed control may result. Cultural Considerations: Reduced control may result when applications are made to annual or perennial weeds that have been mowed, grazed, or cut, and have not been allowed to regrow to the specified stage for treatment. Rainfastness: Heavy rainfall soon after application may wash off this product from the foliage and a repeat application up to the labeled rate may be required for adequate control. Spray Coverage: For best results, spray coverage should be uniform and complete. Mode of Action: The active ingredient in this product inhibits an enzyme. This enzyme is found only in plants and microorganisms that are essential to forming specific amino acids. No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product. Weeds germinating from seed after application will not be controlled. Unemerged plants arising from unattached underground rhizomes or rootstocks of perennials will not be affected by the herbicide and will continue to grow. Biological Degradation: Degradation of this product is primarily a biological process carried out by soil microbes. Maximum Application Rates: The maximum application rates specified in this label are given in units of volume, either fluid ounces, pints or quarts, of this product per acre. The maximum allowed application rates apply to this product combined with the use of any and all other glyphosate- or sulfosate-containing herbicides, either applied separately or in a tank mix, on the basis of total pounds of glyphosate (acid equivalents) per acre. If more than one glyphosate- or sulfosate- containing product is applied to the same site within the same year, ensure that the total of pounds acid equivalent glyphosate does not exceed the maximum allowed. Do not apply more than 8 quarts of this product (8 lb glyphosate acid) per acre per year for all use sites listed on this label. IMPORTANT: When using this product, unless otherwise specified, mix with a surfactant, such as a nonionic surfactant containing 80% or greater active ingredient. For conifer release (pine release) use only surfactants that are approved for conifer release and specified on the surfactant label as safe for use in conifer release (pine release). Use of this product without surfactant will result in reduced herbicide performance. Ammonium sulfate, drift control additives, or dyes and colorants may be used. See Mixing Directions and the surfactant manufacturer’s label for more information. Grazing Restrictions: This product may be used to treat undesirable vegetation in utility rights-of-way that pass through pastures, rangeland, and forestry sites that are being grazed. For tank mix applications, comply with all restrictions appearing on the tank mix product label. Except for lactating dairy animals there are no grazing restrictions following the labeled applications of this product. For lactating dairy animals there are no grazing restrictions for the following labeled applications of this product: • Where the spray can be directed onto undesirable woody brush and trees, including in handgun spray to wet or low volume directed spray treatments. •For tree injection of frill applications and for cut stump treatments. For broadcast applications, observe the following restrictions for lactating dairy animals: • For application rates between 4.5 and 7.5 quarts per acre, no more than 15 percent of the available grazing area may be treated. • For application rates less than 4.5 quarts per acre, no more than 25 percent of the available grazing area may be treated. These restrictions do not apply to pastures, rangeland or forestry sites outside of utility rights-of-way. Herbicide Resistance Management Glyphosate, the active ingredient in this product, is a group 9 herbicide (inhibitor of EPSP synthase). Some naturally occurring weed biotypes that are tolerant (resistant) to glyphosate may exist due to genetic variability in a weed population. Where resistant biotypes exist, the repeated use of herbicides with the same mode of action can lead to the selection for resistant weeds. Certain agronomic practices reduce the likelihood that resistant weed populations will develop, and can be utilized to manage weed resistance once it occurs. To delay the selection for glyphosate resistant weeds, use the following practices: • Scout fields before and after application to detect weed escapes or shifts in weed species. •Start with a clean field by applying a burndown herbicide or by tillage. •Control weeds early when they are small. • Add other herbicides, including a selective and/or a residual herbicide, and cultural practices, including tillage or crop rotation, where appropriate. • Use the application rate for the most difficult to control weed in the field. Do not tank mix with other herbicides that reduce this product’s efficacy through antagonism or with ones that encourage application rates of this product below those specified on this label. •Control weed escapes and prevent weeds from setting seeds. • In situations where resistant weeds are a problem, before moving from one site to another, clean equipment to minimize the spread of weed seeds or plant parts. •Use new commercial seed that is as free of weed seed as possible. • Report any incidence of repeated non-performance of this product against a particular weed species to the local retailer, county extension agent, or SePRO Corporation representative. The following good agronomic practices are recommended to reduce the spread of confirmed glyphosate-resistant biotypes: • Tank mix this product or apply it sequentially with an appropriately labeled herbicide with a different mode of action to achieve control if a naturally occurring resistant biotype is present in the site. • Cultural and mechanical control practices, including crop rotation or tillage, may also be used. • To control weed escapes, including resistant biotypes, before they set seed, scout treated sites after applying this product. • Thoroughly clean equipment before leaving any site known to contain resistant biotypes. Because the presence of glyphosate resistance in weed populations is difficult to detect prior to use, SePRO Corporation accepts no liability for any losses that may result from the failure of this product to control glyphosate-resistant weeds. Attention Avoid contact of herbicide with foliage, green stems, exposed non-woody roots or fruit of crops, desirable plants and trees, because severe injury or destruction may result. Plan Set Date: July 30, 2025 3 AVOID DRIFT. Use extreme care when applying this product to prevent injury to desirable plants and crops. Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute quantities of this product can cause severe damage or destruction to the crop, plants or other areas on which treatment was not intended. The likelihood of injury occurring from the use of this product increases when winds are gusty, as wind velocity increases, when wind direction is constantly changing, or when there are other meteorological conditions that favor spray drift. When spraying, avoid combinations of pressure and nozzle type that will result in splatter or fine particles (mist) which are likely to drift. Avoid applying at excessive speed or pressure. NOTE: Use of this product in any manner not consistent with this label may result in injury to persons, animals or crops, or other unintended consequences. Keep container closed to prevent spills and contamination. Spray Drift Management Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment- and-weather-related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions. The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops. These requirements do not apply to forestry applications, public health uses or to applications using dry formulations. •The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor. •Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees. Where states have more stringent regulations, they must be observed. The applicator must be familiar with and take into account the information covered in the Aerial Drift Reduction Advisory. Aerial Drift Reduction Advisory This section is advisory in nature and does not supersede the mandatory label requirements. Importance of Droplet Size: The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential, but will not prevent adverse effects from drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions). Controlling Droplet Size: • Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows product larger droplets. • Pressure - Do not exceed the nozzle manufacturer’s recommended pressures. Use the lower spray pressures for the nozzle. Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. • Nozzle Orientation - Orienting nozzles so that the spray is parallel to the airstream produces larger droplets than other orientations and is the recommended practice. Significant deflection from horizontal will reduce droplet size and increase drift potential. • Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift. Boom Length: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width. Application Height: Applications must not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. Swath Adjustment: When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance must increase with increasing drift potential (higher wind, smaller drops, etc.). Wind: Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. Do not apply this product when wind speed is below 2 mph due to variable wind direction and high inversion potential. Note: Local terrain can influence wind patterns. Every applicator should be familiar with local wind patterns and how they affect spray drift. Temperature and Humidity: When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. Temperature Inversions: Do not apply this product during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common during inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a connected cloud (under low wind conditions) indicates an inversion, while smoke that moves upwards and rapidly dissipates indicates good vertical air mixing. Sensitive Areas: Apply this pesticide only when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., when wind is blowing away from the sensitive areas). Mixing Directions Use only clean, stainless steel, fiberglass, plastic or plastic-lined steel containers to mix, store and apply spray solutions of this product. Do not mix, store or apply this product or spray solutions of this product in galvanized steel or unlined steel, except stainless steel, containers or spray tanks. Eliminate any risk of siphoning the contents of the tank mix back into the carrier source while mixing. Use approved anti-back-siphoning devices where required by state or local regulations. Note: Reduced results may occur if water containing soil is used, including visibly muddy water or water from ponds and ditches that is not clear. AquaPro – Alone This product mixes readily with water. Mix spray solutions of this product as follows: 1.Fill the mixing or spray tank with the required amount of clean water. 2. Add the specified amount of this product and nonionic surfactant near the end of the filling process and mix well. 3. During mixing and application, foaming of the spray solution may occur. To prevent or minimize foaming, avoid the use of mechanical agitators, terminate by-pass and return lines at the bottom of the tank and, if needed, use an approved anti-foam or defoaming agent. AquaPro – Tank Mix This product does not provide residual weed control. For residual weed control or an alternate mode of action, tank mix this product with other herbicides. It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Under certain conditions, at certain growth stages, and/or under other circumstances, some tank mix products have the potential to cause injury. Read all labels for products used in the tank mix prior to using them to determine the potential for crop injury. Tank mixing with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers may result in reduced weed control or injury. Do not use these products in applications with this product unless otherwise noted in this label. To the extent consistent with applicable law, buyer and all users are responsible for all loss or damage in connection with the use or handling of mixtures of this product with herbicides or other materials that are not expressly specified in this labeling. Mixing this product with herbicides or other materials not specified on this label may result in reduced performance. The user is responsible for ensuring that the specific application being made is included on the label of the product used in the tank mix when Plan Set Date: July 30, 2025 4 a tank mixture with a generic active ingredient, including 2,4-D, atrazine, dicamba, diuron, or pendimethalin, is used. Read all individual product labels for all products in the tank mix and observe all precautions and restrictions on the label. Use according to the most restrictive directions for each product in the tank mix. Always predetermine the compatibility of all tank mix products, together in the carrier, by mixing small proportional quantities in advance of mixing and applying them to the use site. Add the tank mix product to the tank as directed by the label. Maintain agitation and add the required amount of this product. Maintain good agitation at all times until the contents in the tank are sprayed. If the mixture is allowed to settle, thorough agitation is required to resuspend the mixture before spraying resumes. Keep the bypass line on or near the bottom of the tank to minimize foaming. The screen size in the nozzle or line strainers must be no finer than 50 mesh. Note: If tank mixing with Garlon® 3A herbicide, ensure that Garlon 3A is well mixed with at least 75 percent of the total spray volume before adding this product to the spray tank to avoid incompatibility. Hand-Held Sprayers Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table: Spray Concentration (percent) Amount of this Product for Desired Volume: 1 gal 25 gal 100 gal 0.5 2/3 fl oz 1 pt 2 qt 0.75 1 fl oz 1 ½ pt 3 qt 1 1 1/3 fl oz 1 qt 1 gal 1.5 2 fl oz 1 ½ qt 1 ½ gal 2 2 2/3 fl oz 2 qt 2 gal 3.75 5 fl oz 3 ¾ qt 3 ¾ gal 5 6 ½ fl oz 1 ¼ gal 5 gal 10 13 fl oz 2 ½ ga 10 gal Nonionic Surfactant When using this product, unless otherwise specified, mix with a surfactant, including a nonionic surfactant containing 80% or more active ingredient. For conifer release (pine release), use only surfactants that are approved for conifer release and specified on the surfactant label as safe for use in conifer release. Using this product without surfactant will result in reduced herbicide performance. Colorants or Dyes Agriculturally-approved colorants or marking dyes may be added to this product. Colorants or dyes used in spray solutions of this product may reduce performance, especially at lower rates or dilutions. Use colorants or dyes according to the manufacturer’s directions. Drift Control Additives Drift control additives may be used with all equipment types except wiper applicators, sponge bars and CDA equipment. When a drift control additive is used, it is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Application Equipment and Application Methods Chemigation: Do not apply this product through any type of irrigation system. Apply spray solutions in properly maintained and calibrated equipment capable of delivering desired volumes. This product may be applied with the following application equipment and application methods. Aerial Application Equipment: Fixed wing and helicopter Do not apply this product using aerial spray equipment except under conditions as specified within this label. Avoid drift. Do not apply when winds are gusty or under any other condition which favors drift. Drift may cause damage to any vegetation contacted to which treatment is not intended. To prevent injury to adjacent desirable vegetation, maintain appropriate buffer zones. Do not directly apply to any body of water. Use the specified rates of this herbicide in 3 to 25 gallons of water per acre unless otherwise specified on this label. Refer to the specific use directions of this label for volumes and application rates. Coarse sprays are less likely to drift; therefore, do not use nozzles or nozzle configurations that dispense spray as fine spray droplets. Do not angle nozzles forward into the airstream and do not increase spray volume by increasing nozzle pressure. A drift control additive may be used. When a drift control additive is used, carefully read and observe the precautionary statements and all other information specified on the additive label. Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices. Aerial Application Restrictions in California Only AVOID DRIFT: Do not apply when winds are gusty or under any other condition which favors drift. Drift may cause damage to any vegetation contacted to which treatment is not intended. To prevent injury to adjacent desirable vegetation, appropriate buffer zones must be maintained. Do not aerially apply this product in a tank mix with dicamba in California. Make aerial applications with helicopter only. To ensure uniform application, avoid streaking, uneven, or overlapped application, and use appropriate marking devices. Use the following guidelines when aerial applications are made near crops or desirable perennial vegetation after budbreak and before total leaf drop, and/or near other desirable vegetation or annual crops: •Do not apply this product using aerial equipment in residential areas. •Do not apply within 100 feet of all desirable vegetation or crop(s). • If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s), do not apply within 500 feet of the desirable vegetation or crop(s). • Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crop(s) may require buffer zones in excess of the 500-foot minimum buffer. • Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist. Use only coarse sprays to minimize drift. Do not use nozzles or nozzle configurations that dispense spray as fine spray droplets. Do not angle nozzles forward into the airstream and do not increase spray volume by increasing nozzle pressure above the manufacturer’s directions. Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this product accumulated during spraying or from spills. Prolonged exposure of this product to uncoated steel surfaces may result in corrosion and possible failure of the part. Landing gear is most susceptible. The maintenance of an organic coating (paint) which meets aerospace specification MIL-C-38413 may prevent corrosion. Additional Limitations For Aerial Application In Fresno County, California Only Always read and follow the label directions and precautionary statements for all products used in the aerial application. The following information applies only from February 15 through March 31 within the following boundaries of Fresno County, California: North: Fresno County line South: Fresno County line East: State Highway 99 West Observe the following directions to minimize off-site movement during aerial application of this product. Minimization of off-site movement is the responsibility of the grower, Pest Control Advisor and aerial applicator. Written Directions Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 24 hours prior to the application. These written directions MUST state the proximity of surrounding crops and that conditions of each manufacturer’s product label and this label have been satisfied. Aerial Applicator Training and Equipment Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural Commissioner and California Department of Pesticide Regulation approved training program for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified at a Fresno County Agricultural Commissioner approved fly-in. Test and calibrate spray equipment at intervals sufficient to insure that proper rates of herbicides and adjuvants are being applied during commercial use. Applicator must document such calibrations and testing. Demonstration of performance at Fresno County Agricultural Commissioner approved fly-ins constitutes such documentation, or other written records showing calculations and measurements of flight Plan Set Date: July 30, 2025 5 and spray parameters acceptable to the Fresno County Agricultural Commissioner. Applications at Night – Do not apply this product by air earlier than 30 minutes prior to sunrise and/or later than 30 minutes after sunset without prior permission from the Fresno County Agricultural Commissioner. To report known or suspected misuse of this product, call 1-800-332-3111. For additional information on the proper aerial application of this product in Fresno County, call 916-784-1718. Aquatic and Noncrop Sites When this product is applied under the conditions described, it controls or partially controls the labeled weeds growing in the following industrial, recreational, and public areas or other similar sites. Aquatic sites includes all bodies of fresh and brackish water that may be flowing, nonflowing, or transient including lakes, rivers, streams, ponds, seeps, irrigation and drainage ditches, canals, reservoirs, estuaries and similar sites. If aquatic sites are present in the noncrop area and are part of the intended treatment, read and observe the following directions: • This product does not control plants that are completely submerged or have a majority of their foliage under water. • There is no restriction on the use of treated water for irrigation, recreation, or domestic purposes. • Consult local and state fish and game agency and water control authorities before applying this product to public water. Permits may be required to treat such water. • To make aquatic applications around and within 1/2 mile of active potable water intakes, the water intake must be turned off for a minimum period of 48 hours after the application. The water intake may be turned on prior to 48 hours if the glyphosate level in the intake water is below 0.7 parts per million as determined by laboratory analysis. These aquatic applications may be made only in those cases where there are alternative water sources or holding ponds that would permit the turning off of an active potable water intake for a minimum period of 48 hours after the application. Restrictions: • Do not apply this product within 1/2 mile upstream of an active potable water intake in flowing water (i.e., river stream, etc.), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond, or reservoir. Ground Application Equipment: Boom or boomless systems, pull-type sprayer, floaters, pick-up sprayers, spray coupes and other ground broadcast equipment. Use the specified rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless otherwise specified on this label. As density of weeds increases, increase the spray volume within the rate range to ensure complete coverage. Carefully select proper nozzles to avoid spraying a fine mist. For best results with ground application equipment, use flat fan nozzles. Check for even distribution of spray droplets. Broadcast Application for Control of Undesirable Competitive Vegetation in Larch (Larix spp.) Plantations in Maine Apply this product to control or reduce competition from undesirable vegetation in Larch (Larix spp.) plantations in the state of Maine. Application Timing Apply only after lignification has occurred in 50% or more of the current year’s terminal growth. Application Directions Broadcast Spray: Use 1 to 3 quarts of this product per acre. Apply in a total spray volume of 10 to 60 gallons per acre using ground equipment or 5 to 15 gallons per acre if applied aerially. Up to 30 fl oz of Entry II surfactant may be added. Directed Sprays: This product may be applied as a directed spray for competitive release of larch. Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface roots of desirable plants. See Application Equipment and Application Methods of the product label. Injury to larch may occur, especially where spray patterns overlap or higher rates of this product or surfactant were applied. Damage can be accentuated if application is made when larch is actively growing or is under stress. Make applications only if some level of injury to larch is acceptable. Hand-Held and High-Volume Including Backpack Application Equipment: Knapsack and backpack sprayers, pump up pressure sprayers, handguns, hand wands, mistblowers, lances, and other hand-held and motorized spray equipment used to direct the spray onto weed foliage. Note: This product is not registered in Arizona or California for use in mistblowers. Apply to foliage of vegetation to be controlled. Do not spray to the point of runoff for applications made on a spray to wet basis. Use coarse sprays only. For best results, cover the top half of the plant and at least half of the total foliage. To ensure adequate spray coverage, spray both sides of large or tall woody brush and trees, when foliage is thick and dense, or where there are multiple sprouts. High Volume Sprays: Prepare a 3/4 to 2 percent solution of this product in water, add a nonionic surfactant and apply to foliage of vegetation to be controlled. For specific rates of application and instructions for control of various annual and perennial weeds, see the Weeds Controlled section. Make applications on a spray to wet basis with uniform and complete spray coverage. Do not spray to point of runoff. Low Volume Directed Sprays: This product may be used as a 5 to 10 percent solution in low volume directed sprays for spot treatment of trees and brush. This treatment method is most effective in areas where there is a low density of undesirable trees or brush. If a straight stream nozzle is used, start the application at the top of the targeted vegetation and spray from top to bottom in a lateral zigzag motion. Ensure that at least 50 percent of the leaves are contacted by the spray solution. For flat fan and cone nozzles and with hand-directed mist blowers, mist the application over the foliage of the targeted vegetation. Treat small, open-branched trees only from one side. If the foliage is thick or there are multiple root sprouts, apply from several sides to ensure adequate spray coverage. Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table. Spray Solution: Desired Volume Amount of This Product 0.5 0.75 1 1.25 1.5 2 5 8 10 1 gal 2/3 fl oz 1 fl oz 11/3 fl oz 12/3 fl oz 2 fl oz 22/3 fl oz 6½ fl oz 10¼ fl oz 13 fl oz 25 gal 1 pt 1½ pt 1 qt 1¼ qt 1½ qt 2 qt 1¼ gal 2 gal 2½ gal 100 gal 2 qt 3 qt 1 gal 1¼ gal 1½ gal 2 gal 5 gal 8 gal 10 gal 2 Tablespoons = 1 fl oz For best results when using knapsack sprayers, mix the specified amount of product with water in a larger container. Fill the knapsack sprayer with the solution and add the correct amount of surfactant. Selective Equipment Equipment: Recirculating sprayers, shielded and hooded sprayers, wiper applicators and sponge bars. Do not contact desirable vegetation with herbicide. Droplets, mist, foam, or splatter of the herbicide settling on desirable vegetation is likely to result in discoloration, stunting or destruction. Better results are obtained when more of the weed is exposed to the herbicide solution. Weeds not contacted by the herbicide solution will not be affected. This may occur in dense clumps, severe infestations, or when the height of weeds varies so that not all weeds are contacted. If this occurs, repeat treatment up to the labeled rate may be necessary. Shielded and Hooded Applicators: A shielded or hooded applicator directs the herbicide solution onto weeds while shielding desirable vegetation from the herbicide. Use nozzles that provide uniform coverage within the treated area. Keep shields on these sprayers adjusted to protect desirable vegetation. Exercise extreme care to avoid contact of the herbicide with desirable vegetation. Wiper Applicators: Wiper applicators are devices that physically wipe appropriate amounts of this product directly onto the weed. Equipment must be designed, maintained and operated to prevent the herbicide solution from contacting desirable vegetation. Adjust wiper applicators used over the top of desirable vegetation so that the wiper contact point is at least 2 inches above the desirable vegetation. Better results are obtained when more of the weed is exposed to the herbicide solution. Weeds should be a minimum of 6 inches above the desirable vegetation. Adjust the applicator height to ensure adequate contact with weeds as weeds not contacted by the herbicide solution will not be affected. Poor contact may occur when weeds are growing in dense clumps, in severe weed infestations, or when weed height varies dramatically. If this occurs, repeat treatment up to the labeled rate may be necessary. Plan Set Date: July 30, 2025 6 Operate this equipment at ground speeds no more than 5 mph. Performance may be improved by reducing speed in areas of heavy weed infestations to ensure adequate wiper saturation. Better results may be obtained if two applications are made in opposite directions. Droplets, mist, foam, or splatter of the herbicide settling onto desirable vegetation may result in discoloration, stunting or destruction. Avoid leakage or dripping onto desirable vegetation. Adjust height of applicator to ensure adequate contact with weeds. Keep wiping surfaces clean. Be aware that on sloping ground the herbicide solution may migrate, causing dripping on the lower end and drying of the wicks on the upper end of a wiper applicator. Do not use wiper equipment when weeds are wet. Mix only the amount of solution to be used during a one-day period as reduced activity may result from use of leftover solutions. Clean wiper parts by thoroughly flushing with water immediately after using this product. For best results, use a nonionic surfactant at a rate of 10 percent by volume of total herbicide solution for all wiper applications. Rope or Sponge Wick Applicators: Use solutions of 33 to 75 percent of this product in water. Panel Applicator: Use solutions of 33 to 100 percent of this product in water. Injection Systems Equipment: Aerial or ground injection sprayers. This product may be used in aerial or ground injection spray systems. It may be used as a liquid concentrate or diluted prior to injecting into the spray stream. Do not mix this product with the concentrate of other products when using injection systems. Controlled Droplet Applicator (CDA) Equipment: Hand-held or boom-mounted applicators that produce a spray consisting of a narrow range of droplet sizes. The rate of this product applied per acre by vehicle-mounted CDA equipment must not be less than the amount specified on this label when applied by conventional broadcast equipment. For vehicle-mounted CDA equipment, apply 3 to 15 gallons of water per acre. For the control of annual weeds with hand-held CDA units, apply a 20 percent solution of this product at a flow rate of 2 fl oz per minute and a walking speed of 1.5 mph (1 1/2 pints of product per acre). For control of perennial weeds, apply a 20 to 40 percent solution of this product at a flow rate of 2 fl oz per minute and a walking speed of 0.75 mph (3 to 6 pints of product per acre). CDA equipment produces a spray pattern that is not easily visible. Exercise extreme care to avoid spray or drift contacting the foliage or any other green tissue of desirable vegetation as damage or destruction may result. Use Sites Use this product in noncrop areas, including airports, apartment complexes, aquatic sites, Christmas tree farms, commercial sites, Conservation Reserve Program (CRP) areas, ditch banks, driveways, dry ditches, dry canals, fencerows, golf courses, greenhouses, habitat management, industrial areas, lumber yards, manufacturing sites, municipal sites, natural areas, office complexes, ornamentals, parking areas, parks, pastures, petroleum tank farms and pumping installations, plant nurseries, public areas, railroads, rangeland, recreation areas, utility rights-of-way, roadsides, shadehouses, sod or turf seed farms, sports complexes, storage areas, substations, turfgrass areas, utility sites, warehouse areas, wildlife habitat management areas, and in grazed areas on these sites. Aquatic Sites This product may be applied to emerged weeds in all bodies of fresh and brackish water that may be flowing, nonflowing or transient including lakes, rivers, streams, ponds, estuaries, rice levees, seeps, irrigation and drainage ditches, canals, reservoirs, wastewater treatment facilities, wildlife habitat restoration and management areas and similar sites. If aquatic sites are present in the noncrop area and are part of the intended treatment, read and observe the following directions: • This product does not control plants that are completely submerged or have a majority of their foliage under water. • There is no restriction on the use of treated water for irrigation, recreation or domestic purposes. • Consult local and state fish and game agency and water control authorities before applying this product to public water. Permits may be required to treat such water. • To make aquatic applications around and within 1/2 mile of active potable water intakes, the water intake must be turned off for a minimum period of 48 hours after the application. The water intake may be turned on prior to 48 hours if the glyphosate level in the intake water is below 0.7 parts per million as determined by laboratory analysis. These aquatic applications may be made only in those cases where there are alternative water sources or holding ponds which would permit the turning off of an active potable water intake for a minimum period of 48 hours after the application. • For treatments after draw down of water or in dry ditches, allow 7 days or more after treatment before reintroduction of water to achieve maximum weed control. Apply this product within 1 day after draw down to ensure application to actively growing weeds. • Floating mats of vegetation may require retreatment up to the labeled rate. Avoid wash off of sprayed foliage by spray boat or recreational boat backwash or by rainfall within 6 hours of application. Do not re-treat within 24 hours following the initial treatment. • Applications made to moving bodies of water must be made while traveling upstream to prevent concentration of this herbicide in water. When making any bankside applications, do not overlap more than 1 foot into open water. Do not spray in bodies of water where weeds do not exist. The maximum application rate of 7 1/2 pints per acre must not be exceeded in any single broadcast application that is being made over water. • When emerged infestations require treatment of the total surface area of impounded water, treating the area in strips may avoid oxygen depletion due to decaying vegetation. Oxygen depletion may result in fish kill. Restrictions: • Do not apply this product directly to water within 1/2 mile upstream of an active potable water intake in flowing water (i.e., river, stream, etc.), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond or reservoir. This restriction does not apply to intermittent inadvertent overspray of water in terrestrial use sites. Wetland Sites This product may be applied to undesirable vegetation in and around water (aquatic areas) and wetlands found in forestry, utility rights-of-way sites or other site listed on the label, including where these sites are adjacent to or surrounding domestic water supply reservoirs, supply streams, lakes and ponds. If wetland sites are present, read and observe the following directions: • There is no restriction on the use of treated water for irrigation, recreation or domestic purposes. • Consult local public water control authorities before applying this product in and around public water. Permits may be required to treat in such areas. Restrictions: • Do not apply this product directly to water within 1/2 mile upstream of an active potable water intake in flowing water (i.e., river, stream, etc.), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond or reservoir. This restriction does not apply to intermittent inadvertent overspray of water in terrestrial use sites. • Do not spray open bodies of water where woody brush, trees and herbaceous weeds do not exist. Do not apply more than 3 3/4 quarts per acre in a single over water broadcast application except in stream crossings in utility right-of-way or where applications will result in less than 20 percent of the total water area being treated. In either of these locations, any specified rate may be applied: Christmas Tree Plantations Broadcast Application (Oregon and Washington Only) Broadcast apply this product over the established Christmas tree species Douglas fir (Pseudotsuga menziesii), fir species (Abies spp.), pine species (Pinus spp.) (except eastern white, loblolly, longleaf, shortleaf, slash), and spruce species (Picea spp.). Use 1 quart of this product per acre in 5 to 30 gallons of water per acre. For best results, add up to 10 fl oz of Entry II Plan Set Date: July 30, 2025 7 surfactant per acre. If using a different surfactant, follow the manufacturer’s directions for use and ensure conifer safety has been adequately tested for that surfactant. Apply after trees have completed at least a full growing season since planting or transplanting. Apply only in the fall after the formation of the final conifer resting buds or in the spring prior to initial bud swell. Final resting buds must be fully hardened and in the dormant stage. Applying this product at any other time may result in unacceptable injury to the Christmas trees. Avoid spray pattern overlap as injury may occur. In some areas, 1 to 2 quarts of this product per acre may be used. Consult your local representative for specific use instructions if rates greater than 1 quart per acre are required. For best results, do not use drift control additives as they may increase injury to Christmas trees. Precautions and Restrictions: • Preharvest Interval: Do not apply within 1 full year prior to tree harvest. • Ensure that adequate buffers are maintained to prevent drift onto nearby desirable crops or vegetation. Cut Stump Treat cut stumps in any noncrop site listed on this label. This product will control regrowth of freshly cut stumps and resprouts of many types of woody brush and tree species, some of which are listed below. Apply this product using suitable equipment to ensure coverage of the entire cambium. Cut trees or resprouts close to the soil surface. Apply a 50 to 100 percent solution of this product to freshly cut surface immediately after cutting. Delays in application may result in reduced performance. For best results, make applications during periods of active growth and full leaf expansion. When used according to directions for cut stump application, this product will control, partially control or suppress most woody brush and tree species, some of which are listed below: Common Name Scientific Name alder Alnus spp. coyotebrush1 Baccharis pilularis dogwood1 Cornus spp. eucalyptus Eucalyptus spp. hickory1 Carya spp. madrone, Pacific Arbutus menziesii maple1 Acer spp. oak Quercus spp. peppertree, Brazilian Schinus terebinthifolius Australian-pine, Casuarina equisetifolia poplar1 Populus spp. reed, giant Arundo donax saltcedar Tamarix ramosissima sweetgum1 Liquidambar styraciflua sycamore1 Platanus occidentalis tan oak Lithocarpus densiflorus willow Salix spp. 1 Do not use this product on these species in the state of California. Precautions and Restrictions: • Do not make cut stump applications when the roots of desirable woody brush or trees may be grafted to the roots of the cut stump. Some sprouts, stems, or trees may share the same root system. •Adjacent trees that are of a similar age, height and spacing may indicate shared roots. •Injury is likely to occur to non-treated stems or trees when one tree or more that shares a common root is treated. Injection and Frill (Woody Brush and Trees) Woody vegetation may be controlled by injection or frill application of this product. Apply this product using suitable equipment that penetrates into the living tissue. Apply the equivalent of 1 mL of this product per each two to three inches of trunk diameter at breast height (DBH). This is best achieved by applying 50 to 100 percent concentration of this product either to a continuous frill around the tree or as cuts evenly spaced around the tree below all branches. As tree diameter increases in size, better results are achieved by applying diluted material to a continuous frill or more closely spaced cuttings. Do not make any applications that allow runoff to occur from frilled or cut areas in species that exude sap freely. In species such as this, make frill or cuts at an oblique angle to produce a cupping effect and use a 100 percent undiluted concentration of this product. For best results, apply during periods of active growth and full leaf expansion. This product controls the following woody species: Common Name Scientific Name oak Quercus spp. poplar Populus spp. sweetgum Liquidambar styraciflua sycamore Platanus occidentalis This product suppresses the following woody species: Common Name Scientific Name blackgum1 Nyssa sylvatica dogwood Cornus spp. hickory Carya spp. maple, red Acer rubrum 1 Do not use this product on these species in the state of California. Forestry Site Preparation This product is for the control or partial control of woody brush, trees, and herbaceous weeds in forestry. This product is also for use in preparing or establishing wildlife openings within these sites and maintaining logging roads. In forestry sites, use this product in site preparation prior to planting any tree species including Christmas trees, eucalyptus, hybrid tree cultivars and silvicultural nursery sites. Unless otherwise specified, make applications of this product for control or partial control of herbaceous weeds, woody brush and trees listed in the Weeds Controlled section. Application Rates Method of Application Rate Spray Volume (gal/ acre) Broadcast aerial 1.5 - 7.5 qt/acre 5 - 30 ground 10 - 60 Spray to Wet handgun, backpack 0.75 - 2%spray to wetmistblowerby volume Low Volume Directed Spray1 handgun, backpack 5 - 10%partial coverage mistblower by volume 1 For low volume directed spray applications, coverage should be uniform with at least 50% of the foliage contacted. For best results, coverage of the top one-half of the plant, including the growing tip, is important (over the top and down coverage) To ensure adequate spray coverage, spray all sides of large or tall woody brush and trees, when foliage is thick and dense, or where there are multiple sense or tall sprouts. Use a higher rate in the rate range for control or partial control of woody brush, trees and hard to control perennial herbaceous weeds. For best results, apply to actively growing woody brush and trees after full leaf expansion and before leaf drop. Use increased rates within the rate range to control perennial herbaceous weeds from emergence up to the appearance of seedheads, flowers or berries. Use a lower rate in the rate range to control annual herbaceous weeds and actively growing perennial herbaceous weeds after seedheads, flowers or berries appear. Apply to foliage of actively growing annual herbaceous weeds anytime after emergence. This product has no herbicidal or residual activity in the soil. Where repeat applications are necessary, do not apply more than 8 quarts of product per acre per year. Tank Mixes This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled. When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Note: For forestry site preparation, make sure the tank mix product is approved for use prior to planting the desired species. Observe planting interval restrictions. Any specified rate of this product may be used in a tank mix with the following products for forestry site preparation: Plan Set Date: July 30, 2025 8 Product Milestone VM Garlon 3A Garlon 4 Arsenal Applicators Concentrate Escort Chopper Oust XP For control of herbaceous weeds, use the lower specified tank mixture rates. For control of dense stands or difficult to control woody brush and trees, use the higher specified rates. Aerial Application Aerially apply this product by helicopter only in forestry sites. See Aerial Application in Application Equipment and Application Methods for more details. Ground Application Apply this product using suitable ground equipment for broadcast applications in forestry sites. See Ground Application in Application Equipment and Application Methods for more details. Unless otherwise specified, apply the specified rates of this product as a broadcast spray in sufficient spray volume to provide complete and uniform coverage of plant foliage. Check for even distribution throughout the spray pattern. Hand-Held and Backpack Application Apply this product using handgun and backpack equipment in forestry sites. See Hand-Held and Backpack Application in Application Equipment and Application Methods for more details. For spray to wet applications, coverage should be uniform and complete, but not to the point of runoff. This product may be used for low volume directed sprays for spot treatment of trees and brush. It is most effective in areas where there is a low density of undesirable trees or brush. For flat fan and cone nozzles, spray the foliage of the targeted vegetation. Small, open branched trees need only be treated from one side. If the foliage is thick or there are multiple root sprouts, apply from several sides to ensure adequate spray coverage. Forestry Conifer and Hardwood Release Directed Sprays and Selective Equipment Apply this product as a directed spray or with selective equipment in forestry conifer and hardwood sites, including Christmas tree plantations and silvicultural nurseries. A surfactant must be used with this product. Use only surfactants approved for conifer release and specified on the surfactant label as safe for use in conifer release (pine release). Using this product without a surfactant will result in reduced herbicide performance. See Mixing Directions and Application Equipment and Application Methods sections. Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface roots of desirable plant species. Tank Mixes: When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Broadcast Application Outside Area of Southeastern United States Apply this product as a broadcast application for release of Douglas fir (Pseudotsuga menziesii), fir (Abies species), hemlock (Tsuga species), pines (Pinus species) (includes all species except loblolly, longleaf, shortleaf, or slash), and California redwood (Sequoia species) outside the area of the southeastern United States. Apply this product as a broadcast application only after formation of final conifer resting buds in the fall or prior to initial bud swelling in the spring. Note: Except where specified, make broadcast applications of this product only where conifers have been established for more than one year. Injury may occur to conifers treated for release, especially where spray patterns overlap or the higher rates are applied. Damage can be accentuated if applications are made when conifers are actively growing, are under stress from drought, flood water, improper planting, insects, animal damage or diseases. Apply 3/4 to 1 ½ quarts per acre as a broadcast spray. Apply 3/4 to 1 1/8 quarts of this product per acre to release Douglas fir, pine and spruce species at the end of the first growing season (except California). Ensure all conifers are well hardened off. A surfactant must be used with this product for optimum weed control. Use only surfactants approved for use in over the top release applications. Using this product without a surfactant will result in reduced herbicide performance. For best results, do not use a surfactant for release of hemlock species or California redwood. In mixed conifer stands, injury to these species may result if a surfactant is used. See Mixing Directions and Application Equipment and Application Methods sections. For release of Douglas fir, a nonionic surfactant for over the top foliar spray may be used. To avoid possible conifer injury, use nonionic surfactants at 2 fl oz per acre at elevations above 1500 feet, or 1 fl oz per acre in the coastal range or at elevations below 1500 feet. Using a higher rate of surfactant may result in unacceptable conifer injury. Ensure the nonionic surfactant has been adequately tested for safety to Douglas fir before using. Tank Mixes with Oust XP: Apply 3/4 to 1 ½ quarts of this product with 1 to 3 oz of Oust XP per acre to release jack pine and white. Use 1 to 1 ½ oz of Oust XP per acre with this product to release white pine. Make applications to actively growing weeds as a broadcast spray over the top of established conifers. Make applications after formation of conifer resting buds in the late summer or fall. Tank Mixes with Arsenal Applicators Concentrate: Apply 3/4 to 1 1/8 quarts of this product with 2 to 6 fl oz of Arsenal Applicators Concentrate per acre to release Douglas fir. Apply 1 ½ quarts of this product with 1 to 2 ½ fl oz of Arsenal Applicators Concentrate per acre to release balsam fir and red spruce. In Maine and New Hampshire, apply up to 2 1/4 quarts of this product per acre to control or suppress difficult to control hardwood species. For the release of red pine, balsam fir, red spruce, white spruce, Norway spruce, and black spruce with dense tough to control brush, and where maples make up a large component of the undesirable trees, this product may be tank mixed with 1 to 2 ½ fl oz of Arsenal Applicators Concentrate and 1 to 3 oz of Oust XP per acre. Apply this mix as a broadcast spray. Broadcast Application in Southeastern United States Apply this product as a broadcast application for release of loblolly pine (Pinus taeda), eastern white pine (Pinus strobus), shortleaf pine (Pinus echinata), slash pine (Pinus elliottii), Virginia pine (Pinus virginiana), and longleaf pine (Pinus palustris) in the southeastern United States. Apply 1 1/8 to 1 7/8 quarts of this product per acre as a broadcast spray during late summer or early fall after the conifers have hardened off. For applications at the end of the first growing season, use 3/4 quart of this product alone or in a tank mix. Tank Mixes with Arsenal Applicators Concentrate: For conifer release, apply 3/4 to 1 ½ quarts of this product with 2 to 16 fl oz of Arsenal Applicators Concentrate per acre as a broadcast spray. Use only on conifer species that are labeled for over the top spray for both products. Use the higher specified rates for dense tough to control wood brush and trees. Herbaceous Release When applied as directed, this product plus listed residual herbicides provide postemergence control of the annual weeds and control or suppression of the perennial weeds listed in this label, and residual control of the weeds listed in the residual herbicide label. Make applications to actively growing weeds as a broadcast spray over the top of labeled conifers. Use a surfactant labeled for use in over the top herbaceous release applications. Using this product without a surfactant will result in reduced herbicide performance. See Mixing Directions and Application Equipment and Application Methods sections on this label. Weed control may be reduced if spray solution water volumes exceed 25 gallons per acre for these treatments. Tank Mixes with Oust XP: Apply 12 to 18 fl oz of this product with 2 to 4 oz of Oust XP per acre to release loblolly pines. Apply 9 to 12 fl oz of this product with 2 to 4 oz of Oust XP per acre to release slash pines. Tank Mix with Atrazine: Apply 3/4 quarts of this product with 4 lb ai of atrazine per acre to release Douglas fir. Apply only over Douglas fir that has been established for at least one full growing season. Apply in the early spring, usually mid-March through early April. Injury will occur if applications are made after bud swell in the spring. For this use, do not add surfactant to the tank mix. In Maine and New Hampshire, for release of red pine, balsam fir, red spruce, white spruce, Norway spruce, and black spruce with heavy grass and herbaceous weeds infesting the site, up to 2 ¼ quarts of this product per acre may be tank mixed with 1 to 3 oz of Oust XP to control grass, herbaceous weeds and woody brush. Apply this mix as a broadcast spray. Plan Set Date: July 30, 2025 9 Mid-Rotation Conifer Release and Spot Treatments for Crop Tree Release and Timber Stand Improvement This product is applied as a ground broadcast or directed spray application for mid-rotation release applications under the canopy of pines (and other conifers) and hardwoods. Make applications using application techniques that prevent or minimize direct contact to the foliage of crop trees (including in stands of pine, other conifers, or hardwood). This may be accomplished using directed sprays and ground equipment with nozzles oriented to target only undesirable understory vegetation below the crop tree canopy. This product is applied as a spot, individual plant treatment for woody and herbaceous weeds (see Hand-Held and Backpack Application in Application Equipment and Application Methods section). When making spot applications, do not allow spray to contact the foliage of desirable crop trees. Noncrop Areas and Industrial Sites See the rate tables in the Annual Weeds, Perennial Weeds, and Woody Brush and Trees sections for specific application rates. This product has no herbicidal or residual activity in the soil. Where repeat applications up to the labeled rate are necessary, do not apply more than 8 quarts of this product per acre per year. Use a higher rate in the rate range for control or partial control of woody brush, trees, and hard to control perennial herbaceous weeds. For best results, apply to actively growing woody brush and trees after full leaf expansion and before fall color and leaf drop. Use increased rates within the rate range for difficult to control species, where dense stands occur, or where conditions for control are not ideal and to control perennial herbaceous weeds from emergence up to the appearance of seedheads, flowers or berries. Use a lower rate in the rate range to control annual herbaceous weeds and actively growing perennial herbaceous weeds after seedheads, flowers or berries appear. Apply to foliage of actively growing annual herbaceous weeds anytime after emergence. Tank Mixing for Noncrop Areas This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled. When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Maintain good agitation at all times during the mixing process and application. Ensure that the tank mix product(s) is well mixed with the spray solution before adding this product. Mix only the amount of spray solution that will be used during the same day. Reduced weed control may result if a tank mixture is allowed to stand overnight. If the spray mix is allowed to settle, thorough agitation is required to resuspend the mixture before spraying is resumed. Weed Control, Trim and Edge, and Bare Ground This product may be used in general noncrop and non-food areas. It may be applied with any application equipment described in this label. This product may be used to trim and edge around objects in noncrop sites, for spot treatment of unwanted vegetation, and to eliminate unwanted weeds growing in established shrub beds or ornamental plantings. This product may be used prior to planting an area to ornamentals, flowers, turfgrass (sod or seed), or prior to laying asphalt or beginning construction projects. To maintain bare ground, repeated applications up to the labeled rate of this product may be used. This product provides control of emerged annual weeds and control or partial control of emerged perennial weeds, woody brush and trees when applied in a tank mix to bare ground. Turfgrass Renovation, Seed or Sod Production This product controls most existing vegetation prior to renovating turfgrass areas or establishing turfgrass grown for seed or sod. For maximum control of existing vegetation, delay planting or sodding to determine if any regrowth from escaped underground plant parts occurs. When repeat treatments are necessary, sufficient regrowth must be attained prior to application. For warm season turfgrass, including bermudagrass, summer or fall applications provide the best control. Where existing vegetation is growing under mowed turfgrass management, apply this product after omitting at last one regular mowing to allow sufficient grown for good interception of the spray. Do not disturb soil or underground plant parts before treatment. Delay tillage or renovation techniques, including vertical mowing, coring, or slicing, for seven days after application to allow translocation into underground plant parts. Desirable turfgrass may be planed following the above procedures. Hand-held equipment may be used for spot treatment of unwanted vegetation growing in existing turfgrass. Broadcast or hand-held equipment may be used to control sod remnants or other unwanted vegetation after sod is harvested. Do not feed or graze turfgrass grown for seed or sod production for eight weeks following application. Ornamentals and Plant Nurseries Post-Direct and Trim and Edge This product may be used as a post-directed spray around established woody ornamental species, including arborvitae, azalea, boxwood, crabapple, euonymus, fir, Douglas fir, jojoba, hollies, lilac, magnolia, maple, oak, provet, pine, spruce and yew. This product may also be used to trim and edge around trees, buildings, sidewalks and roads, potted plants and other objects in a nursery setting. Desirable plants may be protected from the spray solution by using shields or coverings made of cardboard or other impermeable material. Do not use this product for any over the top broadcast spray in ornamentals. Exercise care to avoid contact of spray, drift or mist with foliage or green bark of established ornamental species. Site Preparation This product may be used prior to planting any ornamental, nursery or Christmas tree species. Greenhouse/Shadehouse This product may be used to control weeds growing in and around greenhouses and shadehouses. Desirable vegetation must not be present during application and air circulation fans must be turned off. Wildlife Habitat Management This product may be used to control exotic and other undesirable vegetation in habitat management and natural areas, including rangeland and wildlife refuges. Apply to allow recovery of native plant species, prior to planting desirable native species, and for broad spectrum vegetation control. Apply spot treatments to selectively remove unwanted plants for habitat enhancement. Wildlife Food Plots This product may be used as a site preparation treatment to control annual and perennial weeds prior to planting wildlife food plots. Any wildlife food species may be planted after applying this product, or native species may be allowed to repopulate the area. If tillage is needed to prepare a seedbed, wait 7 days after application before tilling to allow translocation into underground plant parts. Hollow Stem Injection Apply this product to control giant knotweed (Polygonum sachalinense), Japanese knotweed (Polygonum cuspidatum), or other invasive knotweeds using individual stem treatment. Use a hand-held injection device that delivers the specified amount of this product into these hollow stem plants. Make a hole through both sides of the stem about 6 inches above the ground, just below a node, using an awl or other pointed tool. Inject 5 mL of undiluted product directly into this hole in the hollow stem. Treat each stem of the knotweed plant. Restrictions: • Do not apply more than a total of 8 quarts of this product per acre for all treatments combined. At 5 mL per stem, 7.5 quarts will treat approximately 1420 stems per acre. Parks, Recreational and Residential Areas Use this product in parks, recreational and residential areas. Apply it with any application equipment described in this label. Use this product to trim and edge around trees, fences, paths, around buildings, sidewalks, and other objects in these areas. This product may be used for spot treatment of unwanted vegetation, eliminate unwanted weeds growing in established shrub beds or ornamental plantings, and prior to planting an area to ornamentals, flowers, turfgrass (sod or seed), or prior to laying asphalt or beginning construction projects. All of the label instructions apply to park and recreational areas. Railroads All of the instructions in the Noncrop Areas and Industrial Sites and Roadside sections apply to railroads. Bare Ground, Ballast and Shoulders, Crossings, and Spot Treatment Use this product to maintain bare ground on railroad ballast and shoulders. Repeat applications up to the labeled rate of this product may Plan Set Date: July 30, 2025 10 be used as weeds emerge to maintain bare ground. Use this product to control tall growing weeds to improve line of sight at railroad crossings and reduce the need for mowing along rights-of-way. Brush Control Apply 3 to 8 quarts of this product per acre as a broadcast spray, using boom-type or boomless nozzles. Applications up to 80 gallons of spray solution per acre may be used. Apply a 3/4 to 1.5 percent solution of this product when using high volume spray to wet applications. Apply a 5 to 10 percent solution of this product when using low volume directed sprays for spot treatment. Roadsides All of the instructions in the Noncrop Areas and Industrial Sites and Railroads sections apply to roadsides. Shoulder Treatments Use this product on road shoulders. Apply it with boom sprayers, shielded boom sprayers, high volume off-center nozzles, OC nozzle clusters, manifold nozzle systems, hand-held equipment, and similar equipment, and under-deck mowing plus herbicide systems.. Guardrails and Other Obstacles to Mowing Use this product to control weeds growing under guardrails and around signposts and other objects along the roadside. Spot Treatment Use this product as a spot treatment to control unwanted vegetation growing along roadsides. Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control. Follow applicable use directions, precautions and limitations on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Chemical Mowing Perennials: This product suppresses perennial grasses listed in this section to serve as a substitute for mowing. Use 4.5 fl oz of this product per acre when treating Kentucky bluegrass, tall fescue, fine fescue, orchardgrass, or quackgrass. Apply 12 fl oz of this product per acre when treating bermudagrass. Apply 4.5 to 8 fl oz of this product per acre when treating bahiagrass. Use the higher labeled rates when grass is under heat stress. Apply 3 pints of this product per acre when treating torpedograss or paragrass. Apply treatments in 10 to 20 gallons of spray solution per acre. Annuals: For growth suppression of some annual grasses, including annual ryegrass, wild barley and wild oats growing in coarse turfgrass on roadsides or other industrial areas, apply 3 to 3.75 fl oz of this product in 10 to 40 gallons of spray solution per acre. Apply when annual grasses are actively growing and before the seedheads are in the boot stage of development. Treatments may cause injury to the desired grasses. Release of Dormant Bermudagrass or Bahiagrass Apply 6 to 48 fl oz of this product per acre in 10 to 40 gallons of water per acre. Use only in areas where bermudagrass or bahiagrass are desirable groundcovers and where some temporary injury or discoloration can be tolerated. Treatments of more than 12 fl oz per acre may result in injury or delayed greenup in highly maintained areas, including golf courses and lawns. For best results on winter annuals, treat when weeds are in an early growth stage (less than 6 inches in height) after most have germinated. For best results on tall fescue, treat when fescue is in or beyond the 4- to 6-leaf stage. Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control. When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Actively Growing Bermudagrass Use this product to control or partially control many annual and perennial weeds for effective release of actively growing bermudagrass. Use only in areas where some temporary injury or discoloration can be tolerated. Use only on well-established bermudagrass. Bermudagrass injury may result from the treatment, but regrowth will occur under moist conditions. Repeat applications of the tank mix in the same season are not recommended because injury may occur. Apply up to 2.25 pints of this product in 10 to 40 gallons of spray solution per acre. Use the lower rate when treating annual weeds less than 6 inches in height (or runner length). Use the higher labeled rate as weeds increase in size or as they approach flower or seedhead formation. Actively Growing Bahiagrass For suppression of vegetable growth and seedhead inhibition of bahiagrass for approximately 45 days, apply 4.5 fl oz of this product in 10 to 40 gallons of water per acre. Apply one to two weeks after full greenup or after mowing to a uniform height of 3 to 4 inches. Make this application prior to seedhead emergence. For suppression up to 120 days, apply 3 fl oz of this product per acre, followed by an application of 1.5 to 3 fl oz per acre about 45 days later. Make no more than two applications per year. Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control. When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Utility Sites Use this product for control of brush, tree, and weed control and side trimming in areas including electrical power, pipeline and telephone rights-of-ways, and other sites associated with these rights-of-ways including substations, roadsides, and railroads. this product may be applied with any application equipment or method described on this label unless specifically prohibited. Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control. When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels. Use according to the most restrictive precautionary statements for each product in the mixture. Any specified rate of this product may be used in a tank mix. Rangelands Use this product to control or suppress many annual weeds growing in perennial cool and warm season grass rangelands. Preventing weed seed production is critical to the successful control of annual grassy weeds invading these perennial grass sites. Eliminate most of the viable seeds with follow up applications in sequential years. Delay grazing of treated areas to encourage growth of desirable perennials. Allowing desirable perennials to flower and reseed in the treated area will encourage successful transition. Bromus: Use this product to control or suppress downy brome/ cheatgrass (Bromus tectorum), Japanese brome (Bromus japonicus), soft chess (Bromus mollis), cheat (Bromus secalinus), cereal rye and jointed goatgrass. Apply 6 to 12 fl oz of this product per acre as a broadcast treatment. For best results, coincide treatments with early seedhead emergence of the most mature plants. Delaying the application until this growth stage maximizes the emergence of other weedy grass flushes. Make applications to the same site each year until seed banks are depleted and the desirable perennial grasses become established on the site. Medusahead: Apply 12 fl oz of this product per acre to control or suppress medusahead at the 3-leaf stage when plants are actively growing. Delaying applications beyond this stage results in reduced or unacceptable control. Repeat applications in subsequent years to eliminate the seed bank before reestablishing desirable perennial grasses. Apply in the fall or spring. Apply by ground or air. Make aerial applications for these uses with fixed wing or helicopter equipment. For aerial applications, apply in 2 to 10 gallons of water per acre. For ground applications, apply in at least 10 to 20 gallons of water per acre. Spot Treatment and Wiper Application Apply this product in rangeland, pastures, or industrial sites as a spot treatment or over the top of desirable grasses using wiper applicators to control tall weeds. See Wiper Application section for specific instructions. Make repeat applications in the same area at 30-day intervals. The entire site or any portion of it may be treated when using 2.25 quarts or less of this product per acre for spot treatments or wiper applications. No more than 10 percent of the total site may be treated at any one time when using more than 2.25 quarts of this product per acre for spot treatments or wiper applications. To achieve maximum performance, remove domestic livestock before application and wait 7 days after application before grazing livestock or harvesting for feed. Plan Set Date: July 30, 2025 11 Pastures Type of Pastures: Bahiagrass, bermudagrass, bluegrass, brome, fescue, orchardgrass, ryegrass, timothy, wheatgrass, alfalfa, clover Spot Treatment and Wiper Application This product may be applied as a spot treatment or as a wiper application. Make applications in the same area at 30-day intervals. See Wiper Application section for specific instructions. Precautions and Restrictions: • For spot treatment and wiper applications, the entire field or any portion of it may be treated when using a rate of 2.25 quarts or less per acre. • Do not treat more than 10 percent of any acre at one time if applying more than 2.25 quarts per acre as a spot treatment or wiper application. • To achieve maximum performance, remove domestic livestock before application and wait 14 days after application before grazing livestock or harvesting. Preplant, Preemergence, and Pasture Renovation Apply this product prior to planting or emergence of forage grasses and legumes. In addition, this product may be used to control perennial pasture species listed on this label prior to re-planting. Precautions and Restrictions: • If the application rates total 2.25 quarts or less per acre, there is no waiting period between treatment and feeding or livestock grazing is required. • If the application rates total more than 2.25 quarts per acre, remove domestic livestock before application and wait eight weeks after application before grazing or harvesting. • Crops listed for treatment in this label may be planted into the treated area at any time. Wait 30 days between application and planting for all other crops. Bamboo Use this product on roadside rights-of way to control or suppress bamboo. Use the higher rate in the rate range for dense stands and larger plants. Mow or cut bamboo and allow it to resprout to have sufficient foliage in order for the spray solution to completely cover the foliage. Optimum control or suppression of bamboo is achieved when this product is applied between August and October (prior to frost). One application of this product plus a surfactant will not eradicate bamboo. Several mowings and applications are required to completely control bamboo. Apply the specified rate plus a surfactant (1/4 to 1/2% v/v), such as a nonionic surfactant containing 80% active ingredient or more. Using this product without a surfactant results in reduced performance. Application Method Rate Spray Volume (gal/acre) ground broadcast 1.5 – 7.5 qt/acre 10 - 60 handgun spray to wet 0.75 – 2%spray to wet handgun or backpack low volume directed spray 4 – 10%spray to cover Restrictions: • Do not apply more than a total of 8 quarts of this product per acre per year. Annual Weeds, Perennial Weeds, and Woody Brush and Trees Annual Weeds Apply 24 fl oz of this product per acre if weeds are less than 6 inches in height or runner length. Use 1.25 to 3 quarts of this product per acre if weeds are more than 6 inches in height or runner length or when weeds are growing under stressed conditions. Use a higher rate in the rate range for tough to control species regardless of the size of the weed at the time of application. Treat tough to control weeds when they are relatively small. Tank mix this product with only those products that are labeled for application at the target site. Refer to the label of the tank mix partner for use sites and application rates. Apply a 0.4 percent solution of this product as a spray to wet application to weeds less than 6 inches in height or runner length. Use a 0.7 to 1.5 percent solution for annual weeds more than 6 inches tall or for smaller weeds growing under stressed conditions. Use the higher concentration for tough to control species or for weeds more than 24 inches tall. Apply prior to seedhead formation in grass or bud formation in broadleaf weeds. Use a 4 to 7 percent solution of this product for low volume directed spray applications. Spray coverage should be uniform with at least 50 percent of the foliage contacted. For best results, cover the top one-half of the plant. To ensure adequate spray coverage, spray both sides of large or tall weeds when foliage is thick and dense or where there are multiple sprouts. Common Name Scientific Name anoda, spurred Anoda cristata balsamapple1 Momordica charantia barley Hordeum vulgare barnyardgrass Echinochloa crus-galli bassia, fivehook Bassia hyssopifolia bittercress Cardamine spp. bluegrass, annual Poa annua bluegrass, bulbous Poa bulbosa brome, downy/cheatgrass Bromus tectorum brome, Japanese Bromus japonicus buttercup Ranunculus spp. Carolina foxtail Alopecurus carolinianus Carolina geranium Geranium carolinianum castorbean Ricinus communis chamomile, mayweed Anthemis cotula cheat Bromus secalinus chervil Anthriscus cerefolium chickweed Cerastium vulgatum cocklebur, common Xanthium strumarium coreopsis, plains Coreopsis tinctoria corn, volunteer Zea mays crabgrass Digitaria spp. dwarfdandelion, Virginia Krigia virginica eastern mannagrass Glyceria spp. eclipta Eclipta prostrata falsedandelion Pyrrhopappus carolinianus falseflax, smallseed Camelina microcarpa fiddleneck Amsinckia spp. field pennycress Thlaspi arvense fleabane, annual Erigeron annuus fleabane, hairy Conyza bonariensis fleabane, rough Erigeron strigosus Florida pusley Richardia scabra foxtail Setaria spp. goatgrass, jointed Aegilops cylindrica goosegrass Eleusine indica groundsel, common Senecio vulgaris henbit Lamium amplexicaule horseweed/marestail Conyza canadensis itchgrass Rottboellia cochinchinensis johnsongrass Sorghum halepense junglerice Echinochloa colona knotweed Polygonum spp. kochia2 Kochia scoparia lambsquarters, common Chenopodium album mallow, little Malva parviflora medusahead Taeniatherum caput-medusae morningglory Ipomoea spp. mustard, blue Chorispora tenella mustard, tumble Sisymbrium altissimum mustard, wild Sinapis arvensis oats, wild Avena fatua panicum, fall Panicum dichotomiflorum pigweed, redroot Amaranthus retroflexus pigweed, smooth Amaranthus hybridus prickly lettuce Lactuca serriola puncturevine Tribulus terrestris purslane, common Portulaca oleracea ragweed, common Ambrosia artemisiifolia ragweed, giant Ambrosia trifida rocket, London Sisymbrium irio Russian-thistle Salsola tragus rye, cereal Secale cereale ryegrass, Italian3 Lolium perenne sandbur, field Cenchrus spinifex sesbania, hemp Sesbania herbacea shattercane Sorghum bicolor shepherd’s-purse Capsella bursa-pastoris sicklepod Senna obtusifolia signalgrass, broadleaf Urochloa platyphylla smartweed, Pennsylvania Polygonum pensylvanicum sowthistle, annual Sonchus oleraceus Spanishneedles3 Bidens bipinnata speedwell, corn Veronica arvensis speedwell, purslane Veronica peregrina Plan Set Date: July 30, 2025 12 Common Name Scientific Name sprangletop Leptochloa spp. spurge, annual Chamaesyce spp. spurge, prostrate Chamaesyce humistrata spurge, spotted Chamaesyce maculata spurry, umbrella Holosteum umbellatum stinkgrass Eragrostis cilianensis sunflower, common Helianthus annuus tansymustard, pinnate Descurainia pinnata teaweed/sida, prickly Sida spinosa Texas panicum Panicum spp. velvetleaf Abutilon theophrasti Virginia pepperweed Lepidium virginicum wheat Triticum aestivum witchgrass Panicum capillare woolly cupgrass Eriochloa villosa yellow rocket Barbarea vulgaris ¹ Apply with hand-held equipment only. 2 Do not treat kochia in the button stage. 3 Apply 3 pints of product per acre. Perennial Weeds Best results are obtained when perennial weeds are treated after they reach the reproductive stage of growth (seedhead initiation in grasses and bud formation in broadleaves). Best results are obtained when non-flowering plants are treated when they reach a mature stage of growth. In many situations, applications are required prior to these growth stages. Under these conditions, use a higher rate in the rate range. When using spray to wet treatments with hand-held equipment, ensure thorough coverage of the plant. For best results, use a 1.5 percent solution on harder to control perennials including bermudagrass, dock, field bindweed, hemp dogbane, milkweed and Canada thistle. Use a 4 to 7 percent solution of this product in low volume directed spray applications. Spray coverage should be uniform with at least 50 percent of the foliage contacted. For best results, cover the top one-half of the plant. To ensure adequate spray coverage, spray both sides of large or tall weeds when foliage is thick and dense or where there are multiple sprouts. Allow 7 days or more after application before tillage. Common Name Scientific Name alfalfa Medicago sativa alligatorweed1 Alternanthera philoxeroides anise/fennel Foeniculum vulgare artichoke, Jerusalem Helianthus tuberosus bahiagrass Paspalum notatum beachgrass, European Ammophila arenaria bentgrass Agrostis spp. bermudagrass Cynodon dactylon bindweed, field Convolvulus arvensis bluegrass, Kentucky Poa pratensis blueweed, Texas Helianthus ciliaris brackenfern Pteridium aquilinum brome, smooth Bromus inermis bursage, woollyleaf Ambrosia grayi canarygrass, reed Phalaris arundinacea cattail Typha spp. clover, red Trifolium pratense clover, white Trifolium repens cogongrass Imperata clylindrica cordgrass Spartina spp. cutgrass, giant1 Zizaniopsis miliacea dallisgrass Paspalum dilatatum dandelion Taraxacum officinale dock, curly Rumex crispus dogbane, hemp Apocynum cannabinum fescue Festuca spp. fescue, tall Lolium arundinaceum German ivy Senecio mikanioides guineagrass Urochloa maxima horsenettle Solanum carolinense horseradish Armoracia rusticana iceplant, crystalline Mesembryanthemum crystallinum johnsongrass Sorghum halepense kikuyugrass Pennisetum clandestinum knapweed, Russian Acroptilon repens lantana, largeleaf Lantana camara lespedeza, common Kummerowia striata Common Name Scientific Name lespedeza, sericea Lespedeza cuneata loosestrife, purple Lythrum salicaria lotus, American Nelumbo lutea maidencane Panicum hemitomon milkweed Asclepias spp. muhly, wirestem Muhlenbergia frondosa mullein, common Verbascum thapsus napiergrass Pennisetum purpureum nightshade, silverleaf Solanum elaeagnifolium nutsedge, purple Cyperus rotundus nutsedge, yellow Cyperus esculentus orchardgrass Dactylis glomerata pampasgrass Cortaderia selloana paragrass Urochloa mutica phragmites2 Phragmites spp. poison-hemlock Conium maculatum quackgrass Elymus repens redvine Brunnichia ovata reed, giant Arundo donax ryegrass, perennial Lolium perenne smartweed, swamp Polygonum amphibium sowthistle, perennial Sonchus arvensis spatterdock Nuphar lutea starthistle, yellow Centaurea solstitialis sweet potato, wild1 Ipomoea pandurata thistle, artichoke Cynara cardunculus thistle, Canada Cirsium arvense timothy Phleum pratense torpedograss1 Panicum repens trumpetcreeper Campsis radicans tules, common Scirpus acutus vaseygrass Paspalum urvillei velvetgrass Holcus spp. water fern3 Salvinia spp waterhyacinth Eichornia crassipes waterlettuce Pistia stratiotes waterprimrose Ludwigia spp. wheatgrass, western Pascopyrum smithii 1 Partial control. 2 Partial control in southeastern states. 3 Not for use in California Woody Brush and Trees Apply this product after full leaf expansion unless otherwise directed. Use the higher labeled rate for larger plants and/or dense areas of growth. On vines, use the higher labeled rate for plants that have reached the woody stage of growth. Best results are obtained when application is made in late summer or fall after fruit formation. In arid areas, best results are obtained when applications are made in the spring or early summer when brush species are at high moisture content and are flowering. Ensure thorough coverage when using hand-held equipment. See Low Volume Directed Spray Application section of label. Spray coverage should be uniform with at least 50 percent of the foliage contacted. For best results, cover the top half to 2/3 of the plant foliage. Spray both sides of large or tall woody brush and trees to ensure adequate spray coverage when foliage is thick and dense or where there are multiple sprouts. Symptoms may not appear prior to frost or senescence with fall treatments. Allow seven days or more after application before tillage, mowing or removal. Repeat treatments up to the label rate may be necessary to control plants regenerating from underground parts or seed. Some autumn colors on undesirable deciduous species are acceptable provided no major leaf drop has occurred. Reduced performance may result if fall treatments are made following a frost. Note: If brush has been mowed or tilled, or trees have been cut, do not treat until regrowth has reached the specified stage of growth. This product will control, partially control, or suppress the following woody brush and trees. Plan Set Date: July 30, 2025 Common Name Scientific Name alder Alnus spp. ash1 Fraxinus spp. aspen, quaking Populus tremuloides bearclover, bearmat Ceanothus prostratus beach Fagus spp. birch Betula spp. bittercherry Prunus emarginata blackberry Rubus spp. blackgum Nyssa sylvatica blue gum, Tasmanian Eucalyptus globulus brackenfern Pteridium aquilinum broom, French Genista monspessulana broom, Scotch Cytisus scoparius buckwheat, California1 Eriogonum fasciculatum cascara1 Frangula purshiana catclaw-vine1 Macfadyena unguis-cati ceanothus Ceanothus spp. chamise Adenostoma fasciculatum cherry Prunus spp. cherry, black Prunus serotina cherry, pin Prunus pensylvanica copperleaf, hophornbeam Acalypha ostryifolia coyotebrush Baccharis pilularis deer vetch Lotus unifoliolatus dewberry, southern Rubus trivialis dogwood Cornus spp. elderberry Sambucus nigra elm1 Ulmus spp. gorse Ulex europaeus hasardia1 Haplopappus squamosus hawthorn Crataegus spp. hazel Corylus spp. hickory Carya spp. holly, Florida Schinus terebinthifolius honeysuckle Lonicera spp. hornbeam, American Carpinus caroliniana kudzu Pueraria montana locust, black1 Robinia pseudoacacia madrone, Pacific Arbutus menziesii manzanita Arctostaphylos spp. maple Acer spp. maple, red1 Acer rubrum maple, sugar Acer saccharum maple, vine1 Acer circinatum monkeyflower1 Mimulus guttatus oak Quercus spp. oak, black1 Quercus kellogia oak, pin Quercus palustris oak, post Quercus stellata oak, red Quercus rubra oak, southern red Quercus falcata oak, white1 Quercus alba peppertree, Brazilian Schinus terebinthifolius persimmon1 Diospyros spp. pine Pknus spp. poison-ivy, eastern Toxicodendron radicans poison-oak Toxicodendron spp. poison-sumac1 Toxicodendron vernix prunus Prunus spp. raspberry Rubus spp. redbud, eastern Cercis canadensis rose, multiflora Rosa multiflora Russian-olive Elaeagnus angustifolia sage,: black, white Salvia spp. sagebrush, California Artemisia californica salmonberry Rubus spectabilis saltcedar1 Tamarix ramosissima saltbush, sea myrtle Baccharis halimifolia Common Name Scientific Name sassafras Sassafras albidum sourwood1 Oxydendrum arboreum sumac, smooth1 Rhus glabra sumac, dwarf1 Rhus copallinum sweetgum Liquidambar styraciflua swordfern1 Polystichum munitum tallowtree, Chinese Triadica sebifera oak, tanbark resprouts Lithocarpus densiflorus thimbleberry, western Rubus parviflorus tobacco, tree1 Nicotiana glauca trumpetcreeper Campsis radicans Virginia-creeper1 Parthenocissus quinquefolia waxmyrtle, southern1 Myrica cerifera willow Salix spp. yellow-poplar1 Liriodendron tulipifera yerba santa Eriodictyon californicum 1 Partial control TERMS AND CONDITIONS OF USE If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not acceptable, return unopened package at once to the seller for a full refund of purchase price paid. Otherwise, to the extent permitted by law, use by the buyer or any other user constitutes acceptance of the terms under Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies. WARRANTY DISCLAIMER SePRO Corporation warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated on the label when used in strict accordance with the directions, subject to the inherent risks set forth below. TO THE EXTENT PERMITTED BY LAW, SePRO Corporation MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. INHERENT RISKS OF USE It is impossible to eliminate all risks associated with use of this product . Crop injury, lack of performance, or other unintended consequences may result because of such factors as use of the product contrary to label instructions (including conditions noted on the label, such as unfavorable temperatures, soil conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), presence of other materials, the manner of application, or other factors, all of which are beyond the control of SePRO Corporation or the seller. To the extent permitted by law, all such risks shall be assumed by buyer. LIMITATION OF REMEDIES The exclusive remedy for losses or damages resulting from this product (including claims based on contract, negligence, strict liability, or other legal theories), shall be limited to, at SePRO Corporation’s election, one of the following: (1) Refund of purchase price paid by buyer or user for product bought, or (2) Replacement of amount of product used. To the extent permitted by law, SePRO Corporation shall not be liable for losses or damages resulting from handling or use of this product unless SePRO Corporation is promptly notified of such loss or damage in writing. To the extent permitted by law, in no case shall SePRO Corporation be liable for consequential or incidental damages or losses. The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be varied by any written or verbal statements or agreements. No employee or sales agent of SePRO Corporation or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or Limitation of Remedies in any manner. ® TM Trademarks of Dow AgroSciences, DuPont or Pioneer and their affilitated companies or respective owners. SePRO Corporation 11550 North Meridian Street, Suite 600 Carmel, IN 46032, U.S.A. Plan Set Date: July 30, 2025 Specimen Label GLYPHOSATE GROUP 9 HERBICIDE ® ™ Trademarks of Dow AgroSciences, DuPont or Pioneer and their affiliated companies or respective owners For control of annual and perennial weeds and woody plants in natural and production (plantations), forests for site preparation, mid-rotation release treatments, timber stand improvement activities, noncrop sites including industrial sites, rights-of-way (including roadsides, electric utility and communication transmission lines, pipelines, railroads, airports), irrigation and drainage ditches, canals, reservoirs, natural areas (including wildlife management areas, wildlife openings, wildlife habitats and refuges, parks and recreational areas, campgrounds, trailheads and trails), rangeland, and in and around aquatic sites and wetlands; also for perennial grass release, and grass growth suppression and grazed areas on these sites. Avoid contact of herbicide with foliage, green stems, exposed non-woody roots or fruit of crops, desirable plants and trees, because severe injury or destruction may result. Active Ingredient: glyphosate† N-(phosphonomethyl)glycine, isopropylamine salt ���������������������������������������������������������������������53�8% Other Ingredients ��������������������������������������������������������������������������������46�2% Total ��������������������������������������������������������������������������������������������������100�0% † Contains 5�4 lb per gallon glyphosate, isopropylamine salt (4 lb per gallon glyphosate acid)� Precautionary Statements Hazards to Humans and Domestic Animals EPA Reg� No� 62719-324 Keep Out of Reach of Children CAUTION Harmful If Inhaled • Avoid breathing spray mist. Remove contaminated clothing and wash before reuse. Wash thoroughly with soap and water after handling. Personal Protective Equipment (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks� Follow manufacturer's instructions for cleaning/maintaining PPE� If no such instructions for washables, use detergent and hot water� Keep and wash PPE separately from other laundry� Engineering Controls When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170�240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS� User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet� • Remove clothing immediately if pesticide gets inside� Then wash thoroughly and put on clean clothing� First Aid If inhaled: Move person to fresh air� If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth- to-mouth if possible� Call a poison control center or doctor for further treatment advice� Have the product container or label with you when calling a poison control center or doctor, or going for treatment� You may also contact 1-800-992-5994 for emergency medical treatment information� Environmental Hazards Do not contaminate water when cleaning equipment or disposing of equipment washwaters� Treatment of aquatic weeds can result in oxygen depletion or loss due to decomposition of dead plants� This oxygen loss can cause fish suffocation� In case of leak or spill, soak up and remove to a landfill� Physical or Chemical Hazards Spray solutions of this product should be mixed, stored and applied using only stainless steel, aluminum, fiberglass, plastic or plastic-lined steel containers� Do not mix, store or apply this product or spray solutions of this product in galvanized steel or unlined steel (except stainless steel) containers or spray tanks. This product or spray solutions of this product react with such containers and tanks to produce hydrogen gas, which may form a highly combustible gas mixture� This gas mixture could flash or explode, causing serious personal injury, if ignited by open flame, spark, welder's torch, lighted cigarette or other ignition source� Directions for Use It is a violation of Federal law to use this product in a manner inconsistent with its labeling� Read all Directions for Use carefully before applying� This is an end-use product. Dow AgroSciences does not intend and has not registered it for reformulation. Do not apply this product in a way that will contact workers or other persons, either directly or through drift� Only protected handlers may be in the area during application� For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation� Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170� This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides� It contains requirements for training, decontamination, notification, and emergency assistance� It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), and restricted entry interval� The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard� Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 4 hours� PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: • Coveralls • Chemical-resistant gloves made of any waterproof material • Shoes plus socks Non-Agricultural Use Requirements The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170)� The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries or greenhouses� Keep people and pets off treated areas until spray solution has dried� Plan Set Date: July 30, 2025 2 Specimen Label Revised 10-01-19 Storage and Disposal Do not contaminate water, food, feed or seed by storage or disposal� Pesticide Storage: Store above 10°F (-12°C) to keep product from crystallizing. Crystals will settle to the bottom� If allowed to crystallize, place in a warm room 68°F (20°C) for several days to redissolve and roll or shake container or recirculate in mini-bulk containers to mix well before using� Pesticide Disposal: Wastes resulting from use of this product that cannot be used or chemically reprocessed should be disposed of in a landfill approved for pesticide disposal or in accordance with applicable Federal, state or local procedures� Nonrefillable containers 5 gallons or less: Container Handling: Nonrefillable container� Do not reuse or refill this container� Triple rinse or pressure rinse container (or equivalent) promptly after emptying� Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip� Fill the container 1/4 full with water and recap� Shake for 10 seconds� Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal� Drain for 10 seconds after the flow begins to drip� Repeat this procedure two more times� Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip� Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal� Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds� Drain for 10 seconds after the flow begins to drip� Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities� Refillable containers larger than 5 gallons: Container Handling: Refillable container� Refill this container with pesticide only� Do not reuse this container for any other purpose� Cleaning the container before final disposal is the responsibility of the person disposing of the container� Cleaning before refilling is the responsibility of the refiller� To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank� Fill the container about 10% full with water and, if possible, spray all sides while adding water� If practical, agitate vigorously or recirculate water with the pump for two minutes� Pour or pump rinsate into application equipment or rinsate collection system� Repeat this rinsing procedure two more times� Then offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities� Nonrefillable containers 5 gallons or larger: Container Handling: Nonrefillable container� Do not reuse or refill this container� Triple rinse or pressure rinse container (or equivalent) promptly after emptying� Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank� Fill the container 1/4 full with water� Replace and tighten closures� Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds� Stand the container on its end and tip it back and forth several times� Turn the container over onto its other end and tip it back and forth several times� Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal� Repeat this procedure two more times� Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip� Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal� Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds� Drain for 10 seconds after the flow begins to drip� Then offer for recycling if available, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities� Product Information This product is a broad spectrum, systemic, postemergent herbicide with no soil residual activity� It is intended for control of annual and perennial weeds and woody plants and brush� It is formulated as a water soluble liquid� Time to Symptoms: The active ingredient in this product moves through the plant from the point of foliage contact to and into the root system� Visible effects are a gradual wilting and yellowing of the plant that advances to complete browning of above ground growth and deterioration of underground plant parts� Visible effects on most annual weeds occur within two to four days, but on most perennial weeds visible effects may not occur for seven days or more� Extremely cool or cloudy weather following treatment may slow the activity of this product and delay development of visual symptoms� Stage of Weeds: Annual weeds are easiest to control when they are small� Best control of most perennial weeds is obtained when treatment is made at late growth stages approaching maturity� Refer to the annual, perennial and woody brush and trees rate tables for specific weeds� Always use the higher rate within the rate range for heavy or dense weed growth or when weeds are growing in an undisturbed (noncultivated) area� When treating weeds with disease or insect damage, weeds heavily covered with dust, or weeds under poor growing conditions, reduced weed control may result� Cultural Considerations: Reduced control may result when applications are made to annual or perennial weeds that have been mowed, grazed, or cut, and have not been allowed to regrow to the specified stage for treatment� Rainfastness: Heavy rainfall soon after application may wash off this product from the foliage and a repeat application up to the labled rate may be required for adequate control� Spray Coverage: For best results, spray coverage should be uniform and complete� Mode of Action: The active ingredient in this product inhibits an enzyme� This enzyme is found only in plants and microorganisms that are essential to forming specific amino acids� No Soil Activity: Weeds must be emerged at the time of application to be controlled by this product� Weeds germinating from seed after application will not be controlled� Unemerged plants arising from unattached underground rhizomes or rootstocks of perennials will not be affected by the herbicide and will continue to grow� Biological Degradation: Degradation of this product is primarily a biological process carried out by soil microbes� Maximum Application Rates: The maximum application rates specified in this label are given in units of volume, either fluid ounces, pints or quarts, of this product per acre� The maximum allowed application rates apply to this product combined with the use of any and all other glyphosate- or sulfosate-containing herbicides, either applied separately or in a tank mix, on the basis of total pounds of glyphosate (acid equivalents) per acre� If more than one glyphosate- or sulfosate- containing product is applied to the same site within the same year, ensure that the total of pounds acid equivalent glyphosate does not exceed the maximum allowed� Do not apply more than 8 quarts of this product (8 lb glyphosate acid) per acre per year for all use sites listed on this label� IMPORTANT: When using this product, unless otherwise specified, mix with a surfactant, such as a nonionic surfactant containing 80% or greater active ingredient� For conifer release (pine release) use only surfactants that are approved for conifer release and specified on the surfactant label as safe for use in conifer release (pine release)� Use of this product without surfactant will result in reduced herbicide performance� Ammonium sulfate, drift control additives, or dyes and colorants may be used� See Mixing Directions and the surfactant manufacturer’s label for more information� Grazing Restrictions: This product may be used to treat undesirable vegetation in utility rights-of-way that pass through pastures, rangeland, and forestry sites that are being grazed� For tank mix applications, comply with all restrictions appearing on the tank mix product label� Except for lactating dairy animals there are no grazing restrictions following the labeled applications of this product� For lactating dairy animals there are no grazing restrictions for the following labeled applications of this product: • Where the spray can be directed onto undesirable woody brush and trees, including in handgun spray to wet or low volume directed spray treatments� • For tree injection of frill applications and for cut stump treatments� For broadcast applications, observe the following restrictions for lactating dairy animals: • For application rates between 4�5 and 7�5 quarts per acre, no more than 15 percent of the available grazing area may be treated� • For application rates less than 4�5 quarts per acre, no more than 25 percent of the available grazing area may be treated� These restrictions do not apply to pastures, rangeland or forestry sites outside of utility rights-of-way� Herbicide Resistance Management Glyphosate, the active ingredient in this product, is a group 9 herbicide (inhibitor of EPSP synthase)� Some naturally occurring weed biotypes that are tolerant (resistant) to glyphosate may exist due to genetic variability in a weed population� Where resistant biotypes exist, the repeated use Plan Set Date: July 30, 2025 3 Specimen Label Revised 10-01-19 of herbicides with the same mode of action can lead to the selection for resistant weeds� Certain agronomic practices reduce the likelihood that resistant weed populations will develop, and can be utilized to manage weed resistance once it occurs� To delay the selection for glyphosate resistant weeds, use the following practices: • Scout fields before and after application to detect weed escapes or shifts in weed species� • Start with a clean field by applying a burndown herbicide or by tillage� • Control weeds early when they are small� • Add other herbicides, including a selective and/or a residual herbicide, and cultural practices, including tillage or crop rotation, where appropriate� • Use the application rate for the most difficult to control weed in the field� Do not tank mix with other herbicides that reduce this product’s efficacy through antagonism or with ones that encourage application rates of this product below those specified on this label� • Control weed escapes and prevent weeds from setting seeds� • In situations where resistant weeds are a problem, before moving from one site to another, clean equipment to minimize the spread of weed seeds or plant parts� • Use new commercial seed that is as free of weed seed as possible� • Report any incidence of repeated non-performance of this product against a particular weed species to the local retailer, county extension agent, or Dow AgroSciences representative� The following good agronomic practices are recommended to reduce the spread of confirmed glyphosate-resistant biotypes: • Tank mix this product or apply it sequentially with an appropriately labeled herbicide with a different mode of action to achieve control if a naturally occurring resistant biotype is present in the site� • Cultural and mechanical control practices, including crop rotation or tillage, may also be used� • To control weed escapes, including resistant biotypes, before they set seed, scout treated sites after applying this product� • Thoroughly clean equipment before leaving any site known to contain resistant biotypes� Because the presence of glyphosate resistance in weed populations is difficult to detect prior to use, Dow AgroSciences accepts no liability for any losses that may result from the failure of this product to control glyphosate-resistant weeds� Attention Avoid contact of herbicide with foliage, green stems, exposed non- woody roots or fruit of crops, desirable plants and trees, because severe injury or destruction may result. AVOID DRIFT. Use extreme care when applying this product to prevent injury to desirable plants and crops. Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation since minute quantities of this product can cause severe damage or destruction to the crop, plants or other areas on which treatment was not intended� The likelihood of injury occurring from the use of this product increases when winds are gusty, as wind velocity increases, when wind direction is constantly changing, or when there are other meteorological conditions that favor spray drift� When spraying, avoid combinations of pressure and nozzle type that will result in splatter or fine particles (mist) which are likely to drift� Avoid applying at excessive speed or pressure. NOTE: Use of this product in any manner not consistent with this label may result in injury to persons, animals or crops, or other unintended consequences� Keep container closed to prevent spills and contamination� Spray Drift Management Avoiding spray drift at the application site is the responsibility of the applicator� The interaction of many equipment- and-weather-related factors determine the potential for spray drift� The applicator and the grower are responsible for considering all these factors when making decisions� The following drift management requirements must be followed to avoid off-target drift movement from aerial applications to agricultural field crops� These requirements do not apply to forestry applications, public health uses or to applications using dry formulations� • The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor� • Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees� Where states have more stringent regulations, they must be observed� The applicator must be familiar with and take into account the information covered in the Aerial Drift Reduction Advisory� Aerial Drift Reduction Advisory This section is advisory in nature and does not supersede the mandatory label requirements. Importance of Droplet Size: The most effective way to reduce drift potential is to apply large droplets� The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control� Applying larger droplets reduces drift potential, but will not prevent adverse effects from drift if applications are made improperly, or under unfavorable environmental conditions (see Wind, Temperature and Humidity, and Temperature Inversions)� Controlling Droplet Size: • Volume - Use high flow rate nozzles to apply the highest practical spray volume� Nozzles with higher rated flows product larger droplets� • Pressure - Do not exceed the nozzle manufacturer’s recommended pressures� Use the lower spray pressures for the nozzle� Higher pressure reduces droplet size and does not improve canopy penetration� When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure� • Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage� • Nozzle Orientation - Orienting nozzles so that the spray is parallel to the airstream produces larger droplets than other orientations and is the recommended practice� Significant deflection from horizontal will reduce droplet size and increase drift potential� • Nozzle Type - Use a nozzle type that is designed for the intended application� With most nozzle types, narrower spray angles produce larger droplets� Consider using low-drift nozzles� Solid stream nozzles oriented straight back produce the largest droplets and the lowest drift� Boom Length: For some use patterns, reducing the effective boom length to less than 3/4 of the wingspan or rotor length may further reduce drift without reducing swath width� Application Height: Applications must not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety� Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind� Swath Adjustment: When applications are made with a crosswind, the swath will be displaced downwind� Therefore, on the up and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind� Swath adjustment distance must increase with increasing drift potential (higher wind, smaller drops, etc�)� Wind: Drift potential is lowest between wind speeds of 2 to 10 mph� However, many factors, including droplet size and equipment type, determine drift potential at any given speed� Do not apply this product when wind speed is below 2 mph due to variable wind direction and high inversion potential� Note: Local terrain can influence wind patterns� Every applicator should be familiar with local wind patterns and how they affect spray drift� Temperature and Humidity: When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation� Droplet evaporation is most severe when conditions are both hot and dry� Temperature Inversions: Do not apply this product during a temperature inversion because drift potential is high� Temperature inversions restrict vertical air mixing, which causes small suspended droplets to remain in a concentrated cloud� This cloud can move in unpredictable directions due to the light variable winds common during inversions� Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light to no wind� They begin to form as the sun sets and often continue into the morning� Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator� Smoke that layers and moves laterally in a connected cloud (under low wind conditions) indicates an inversion, while smoke that moves upwards and rapidly dissipates indicates good vertical air mixing� Sensitive Areas: Apply this pesticide only when the potential for drift to adjacent sensitive areas (e�g�, residential areas, bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e�g�, when wind is blowing away from the sensitive areas)� Mixing Directions Use only clean, stainless steel, fiberglass, plastic or plastic-lined steel containers to mix, store and apply spray solutions of this product� Do not mix, store or apply this product or spray solutions of this product in galvanized steel or unlined steel, except stainless steel, containers or spray tanks� Eliminate any risk of siphoning the contents of the tank mix back into the carrier source while mixing� Use approved anti-back-siphoning devices where required by state or local regulations� Plan Set Date: July 30, 2025 4 Specimen Label Revised 10-01-19 Note: Reduced results may occur if water containing soil is used, including visibly muddy water or water from ponds and ditches that is not clear. Rodeo – Alone This product mixes readily with water� Mix spray solutions of this product as follows: 1� Fill the mixing or spray tank with the required amount of clean water� 2� Add the specified amount of this product and nonionic surfactant near the end of the filling process and mix well� 3� During mixing and application, foaming of the spray solution may occur� To prevent or minimize foaming, avoid the use of mechanical agitators, terminate by-pass and return lines at the bottom of the tank and, if needed, use an approved anti-foam or defoaming agent� Rodeo – Tank Mix This product does not provide residual weed control� For residual weed control or an alternate mode of action, tank mix this product with other herbicides� It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use� Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture�� Under certain conditions, at certain growth stages, and/or under other circumstances, some tank mix products have the potential to cause injury� Read all labels for products used in the tank mix prior to using them to determine the potential for crop injury� Tank mixing with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers may result in reduced weed control or injury� Do not use these products in applications with this product unless otherwise noted in this label� To the extent consistent with applicable law, buyer and all users are responsible for all loss or damage in connection with the use or handling of mixtures of this product with herbicides or other materials that are not expressly specified in this labeling� Mixing this product with herbicides or other materials not specified on this label may result in reduced performance� The user is responsible for ensuring that the specific application being made is included on the label of the product used in the tank mix when a tank mixture with a generic active ingredient, including 2,4-D, atrazine, dicamba, diuron, or pendimethalin, is used� Read all individual product labels for all products in the tank mix and observe all precautions and restrictions on the label� Use according to the most restrictive directions for each product in the tank mix� Always predetermine the compatibility of all tank mix products, together in the carrier, by mixing small proportional quantities in advance of mixing and applying them to the use site� Add the tank mix product to the tank as directed by the label� Maintain agitation and add the required amount of this product� Maintain good agitation at all times until the contents in the tank are sprayed� If the mixture is allowed to settle, thorough agitation is required to resuspend the mixture before spraying resumes� Keep the bypass line on or near the bottom of the tank to minimize foaming� The screen size in the nozzle or line strainers must be no finer than 50 mesh� Note: If tank mixing with Garlon® 3A herbicide, ensure that Garlon 3A is well mixed with at least 75 percent of the total spray volume before adding this product to the spray tank to avoid incompatibility� Hand-Held Sprayers Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table: Spray Concentration (percent) Amount of this Product for Desired Volume: 1 gal 25 gal 100 gal 0.5 2/3 fl oz 1 pt 2 qt 0.75 1 fl oz 1 1/2 pt 3 qt 1 1 1/3 fl oz 1 qt 1 gal 1.5 2 fl oz 1 1/2 qt 1 1/2 gal 2 2 2/3 fl oz 2 qt 2 gal 3.75 5 fl oz 3 3/4 qt 3 3/4 gal 5 6 1/2 fl oz 1 1/4 gal 5 gal 10 13 fl oz 2 1/2 gal 10 gal Nonionic Surfactant When using this product, unless otherwise specified, mix with a surfactant, including a nonionic surfactant containing 80% or more active ingredient� For conifer release (pine release), use only surfactants that are approved for conifer release and specified on the surfactant label as safe for use in conifer release� Using this product without surfactant will result in reduced herbicide performance� Colorants or Dyes Agriculturally-approved colorants or marking dyes may be added to this product� Colorants or dyes used in spray solutions of this product may reduce performance, especially at lower rates or dilutions� Use colorants or dyes according to the manufacturer's directions� Drift Control Additives Drift control additives may be used with all equipment types except wiper applicators, sponge bars and CDA equipment� When a drift control additive is used, it is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for the intended use� Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture�� Application Equipment and Application Methods Chemigation: Do not apply this product through any type of irrigation system� Apply spray solutions in properly maintained and calibrated equipment capable of delivering desired volumes� This product may be applied with the following application equipment and application methods� Aerial Application Equipment: Fixed wing and helicopter Do not apply this product using aerial spray equipment except under conditions as specified within this label. Avoid drift. Do not apply when winds are gusty or under any other condition which favors drift� Drift may cause damage to any vegetation contacted to which treatment is not intended� To prevent injury to adjacent desirable vegetation, maintain appropriate buffer zones� Do not directly apply to any body of water� Use the specified rates of this herbicide in 3 to 25 gallons of water per acre unless otherwise specified on this label� Refer to the specific use directions of this label for volumes and application rates� Coarse sprays are less likely to drift; therefore, do not use nozzles or nozzle configurations that dispense spray as fine spray droplets� Do not angle nozzles forward into the airstream and do not increase spray volume by increasing nozzle pressure� A drift control additive may be used� When a drift control additive is used, carefully read and observe the precautionary statements and all other information specified on the additive label� Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices� Aerial Application Restrictions in California Only AVOID DRIFT: Do not apply when winds are gusty or under any other condition which favors drift� Drift may cause damage to any vegetation contacted to which treatment is not intended� To prevent injury to adjacent desirable vegetation, appropriate buffer zones must be maintained� Do not aerially apply this product in a tank mix with dicamba in California� Make aerial applications with helicopter only� To ensure uniform application, avoid streaking, uneven, or overlapped application, and use appropriate marking devices� Use the following guidelines when aerial applications are made near crops or desirable perennial vegetation after budbreak and before total leaf drop, and/or near other desirable vegetation or annual crops: • Do not apply this product using aerial equipment in residential areas� • Do not apply within 100 feet of all desirable vegetation or crop(s)� • If wind up to 5 miles per hour is blowing toward desirable vegetation or crop(s), do not apply within 500 feet of the desirable vegetation or crop(s)� • Winds blowing from 5 to 10 miles per hour toward desirable vegetation or crop(s) may require buffer zones in excess of the 500-foot minimum buffer� • Do not apply when winds are in excess of 10 miles per hour or when inversion conditions exist� Use only coarse sprays to minimize drift� Do not use nozzles or nozzle configurations that dispense spray as fine spray droplets� Do not angle nozzles forward into the airstream and do not increase spray volume by increasing nozzle pressure above the manufacturer's directions� Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this product accumulated during spraying or from spills� Prolonged exposure of this product to uncoated steel surfaces may result in corrosion and possible failure of the part� Landing gear is most susceptible� The maintenance of an organic coating (paint) which meets aerospace specification MIL-C-38413 may prevent corrosion� Plan Set Date: July 30, 2025 5 Specimen Label Revised 10-01-19 ADDITIONAL LIMITATIONS FOR AERIAL APPLICATION IN FRESNO COUNTY, CALIFORNIA ONLY Always read and follow the label directions and precautionary statements for all products used in the aerial application� The following information applies only from February 15 through March 31 within the following boundaries of Fresno County, California: North: Fresno County line South: Fresno County line East: State Highway 99 West Observe the following directions to minimize off-site movement during aerial application of this product� Minimization of off-site movement is the responsibility of the grower, Pest Control Advisor and aerial applicator� Written Directions Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural Commissioner 24 hours prior to the application� These written directions MUST state the proximity of surrounding crops and that conditions of each manufacturer’s product label and this label have been satisfied� Aerial Applicator Training and Equipment Aerial application of this product is limited to pilots who have successfully completed a Fresno County Agricultural Commissioner and California Department of Pesticide Regulation approved training program for aerial application of herbicides� All aircraft must be inspected, critiqued in flight and certified at a Fresno County Agricultural Commissioner approved fly-in� Test and calibrate spray equipment at intervals sufficient to insure that proper rates of herbicides and adjuvants are being applied during commercial use� Applicator must document such calibrations and testing� Demonstration of performance at Fresno County Agricultural Commissioner approved fly-ins constitutes such documentation, or other written records showing calculations and measurements of flight and spray parameters acceptable to the Fresno County Agricultural Commissioner� Applications at Night – Do not apply this product by air earlier than 30 minutes prior to sunrise and/or later than 30 minutes after sunset without prior permission from the Fresno County Agricultural Commissioner� To report known or suspected misuse of this product, call 1-800-332-3111� For additional information on the proper aerial application of this product in Fresno County, call 916-784-1718� Aquatic and Noncrop Sites When this product is applied under the conditions described, it controls or partially controls the labeled weeds growing in the following industrial, recreational, and public areas or other similar sites� Aquatic sites includes all bodies of fresh and brackish water that may be flowing, nonflowing, or transient including lakes, rivers, streams, ponds, seeps, irrigation and drainage ditches, canals, reservoirs, estuaries and similar sites� If aquatic sites are present in the noncrop area and are part of the intended treatment, read and observe the following directions: • This product does not control plants that are completely submerged or have a majority of their foliage under water� • There is no restriction on the use of treated water for irrigation, recreation, or domestic purposes� • Consult local and state fish and game agency and water control authorities before applying this product to public water� Permits may be required to treat such water� • To make aquatic applications around and within 1/2 mile of active potable water intakes, the water intake must be turned off for a minimum period of 48 hours after the application� The water intake may be turned on prior to 48 hours if the glyphosate level in the intake water is below 0�7 parts per million as determined by laboratory analysis� These aquatic applications may be made only in those cases where there are alternative water sources or holding ponds that would permit the turning off of an active potable water intake for a minimum period of 48 hours after the application� Restrictions: • Do not apply this product within 1/2 mile upstream of an active potable water intake in flowing water (i�e�, river stream, etc�), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond, or reservoir� Ground Application Equipment: Boom or boomless systems, pull-type sprayer, floaters, pick- up sprayers, spray coupes and other ground broadcast equipment� Use the specified rates of this product in 3 to 40 gallons of water per acre as a broadcast spray unless otherwise specified on this label� As density of weeds increases, increase the spray volume within the rate range to ensure complete coverage� Carefully select proper nozzles to avoid spraying a fine mist� For best results with ground application equipment, use flat fan nozzles� Check for even distribution of spray droplets� Hand-Held and High-Volume Including Backpack Application Equipment: Knapsack and backpack sprayers, pump up pressure sprayers, handguns, hand wands, mistblowers, lances, and other hand- held and motorized spray equipment used to direct the spray onto weed foliage� Note: This product is not registered in Arizona or California for use in mistblowers� Apply to foliage of vegetation to be controlled� Do not spray to the point of runoff for applications made on a spray to wet basis� Use coarse sprays only� For best results, cover the top half of the plant and at least half of the total foliage� To ensure adequate spray coverage, spray both sides of large or tall woody brush and trees, when foliage is thick and dense, or where there are multiple sprouts� High Volume Sprays: Prepare a 3/4 to 2 percent solution of this product in water, add a nonionic surfactant and apply to foliage of vegetation to be controlled� For specific rates of application and instructions for control of various annual and perennial weeds, see the Weeds Controlled section� Make applications on a spray to wet basis with uniform and complete spray coverage� Do not spray to point of runoff� Low Volume Directed Sprays: This product may be used as a 5 to 10 percent solution in low volume directed sprays for spot treatment of trees and brush� This treatment method is most effective in areas where there is a low density of undesirable trees or brush� If a straight stream nozzle is used, start the application at the top of the targeted vegetation and spray from top to bottom in a lateral zigzag motion� Ensure that at least 50 percent of the leaves are contacted by the spray solution� For flat fan and cone nozzles and with hand-directed mist blowers, mist the application over the foliage of the targeted vegetation� Treat small, open- branched trees only from one side� If the foliage is thick or there are multiple root sprouts, apply from several sides to ensure adequate spray coverage� Prepare the desired volume of spray solution by mixing the amount of this product in water as shown in the following table� Spray Solution: Desired Volume Amount of This Product 0.5 0.75 1 1.25 1.5 2 5 8 10 1 gal 2/3 fl oz 1 fl oz 1 1/3 fl oz 1 2/3 fl oz 2 fl oz 2 2/3 fl oz 6 1/2 fl oz 10 1/4 fl oz 13 fl oz 25 gal 1 pt 1 1/2 pt 1 qt 1 1/4 qt 1 1/2 qt 2 qt 1 1/4 gal 2 gal 2 1/2 gal 100 gal 2 qt 3 qt 1 gal 1 1/4 gal 1 1/2 gal 2 gal 5 gal 8 gal 10 gal 2 Tablespoons = 1 fl oz For best results when using knapsack sprayers, mix the specified amount of product with water in a larger container� Fill the knapsack sprayer with the solution and add the correct amount of surfactant� Selective Equipment Equipment: Recirculating sprayers, shielded and hooded sprayers, wiper applicators and sponge bars� Do not contact desirable vegetation with herbicide� Droplets, mist, foam, or splatter of the herbicide settling on desirable vegetation is likely to result in discoloration, stunting or destruction� Better results are obtained when more of the weed is exposed to the herbicide solution� Weeds not contacted by the herbicide solution will not be affected� This may occur in dense clumps, severe infestations, or when the height of weeds varies so that not all weeds are contacted� If this occurs, repeat treatment up to the labled rate may be necessary� Shielded and Hooded Applicators: A shielded or hooded applicator directs the herbicide solution onto weeds while shielding desirable vegetation from the herbicide� Use nozzles that provide uniform coverage within the treated area� Keep shields on these sprayers adjusted to protect desirable vegetation� Exercise extreme care to avoid contact of the herbicide with desirable vegetation. Wiper Applicators: Wiper applicators are devices that physically wipe appropriate amounts of this product directly onto the weed� Equipment must be designed, maintained and operated to prevent the herbicide solution from contacting desirable vegetation� Plan Set Date: July 30, 2025 6 Specimen Label Revised 10-01-19 Adjust wiper applicators used over the top of desirable vegetation so that the wiper contact point is at least 2 inches above the desirable vegetation� Better results are obtained when more of the weed is exposed to the herbicide solution� Weeds should be a minimum of 6 inches above the desirable vegetation� Adjust the applicator height to ensure adequate contact with weeds as weeds not contacted by the herbicide solution will not be affected� Poor contact may occur when weeds are growing in dense clumps, in severe weed infestations, or when weed height varies dramatically� If this occurs, repeat treatment up to the labeled rate may be necessary� Operate this equipment at ground speeds no more than 5 mph� Performance may be improved by reducing speed in areas of heavy weed infestations to ensure adequate wiper saturation� Better results may be obtained if two applications are made in opposite directions� Droplets, mist, foam, or splatter of the herbicide settling onto desirable vegetation may result in discoloration, stunting or destruction� Avoid leakage or dripping onto desirable vegetation� Adjust height of applicator to ensure adequate contact with weeds� Keep wiping surfaces clean� Be aware that on sloping ground the herbicide solution may migrate, causing dripping on the lower end and drying of the wicks on the upper end of a wiper applicator� Do not use wiper equipment when weeds are wet� Mix only the amount of solution to be used during a one-day period as reduced activity may result from use of leftover solutions� Clean wiper parts by thoroughly flushing with water immediately after using this product� For best results, use a nonionic surfactant at a rate of 10 percent by volume of total herbicide solution for all wiper applications� Rope or Sponge Wick Applicators: Use solutions of 33 to 75 percent of this product in water� Panel Applicator: Use solutions of 33 to 100 percent of this product in water� Injection Systems Equipment: Aerial or ground injection sprayers� This product may be used in aerial or ground injection spray systems� It may be used as a liquid concentrate or diluted prior to injecting into the spray stream� Do not mix this product with the concentrate of other products when using injection systems� Controlled Droplet Applicator (CDA) Equipment: Hand-held or boom-mounted applicators that produce a spray consisting of a narrow range of droplet sizes� The rate of this product applied per acre by vehicle-mounted CDA equipment must not be less than the amount specified on this label when applied by conventional broadcast equipment� For vehicle-mounted CDA equipment, apply 3 to 15 gallons of water per acre� For the control of annual weeds with hand-held CDA units, apply a 20 percent solution of this product at a flow rate of 2 fl oz per minute and a walking speed of 1�5 mph (1 1/2 pints of product per acre)� For control of perennial weeds, apply a 20 to 40 percent solution of this product at a flow rate of 2 fl oz per minute and a walking speed of 0�75 mph (3 to 6 pints of product per acre)� CDA equipment produces a spray pattern that is not easily visible� Exercise extreme care to avoid spray or drift contacting the foliage or any other green tissue of desirable vegetation as damage or destruction may result� Use Sites Use this product in noncrop areas, including airports, apartment complexes, aquatic sites, Christmas tree farms, commercial sites, Conservation Reserve Program (CRP) areas, ditch banks, driveways, dry ditches, dry canals, fencerows, golf courses, greenhouses, habitat management, industrial areas, lumber yards, manufacturing sites, municipal sites, natural areas, office complexes, ornamentals, parking areas, parks, pastures, petroleum tank farms and pumping installations, plant nurseries, public areas, railroads, rangeland, recreation areas, utility rights-of-way, roadsides, shadehouses, sod or turf seed farms, sports complexes, storage areas, substations, turfgrass areas, utility sites, warehouse areas, wildlife habitat management areas, and in grazed areas on these sites� Aquatic Sites This product may be applied to emerged weeds in all bodies of fresh and brackish water that may be flowing, nonflowing or transient including lakes, rivers, streams, ponds, estuaries, rice levees, seeps, irrigation and drainage ditches, canals, reservoirs, wastewater treatment facilities, wildlife habitat restoration and management areas and similar sites� If aquatic sites are present in the noncrop area and are part of the intended treatment, read and observe the following directions: •This product does not control plants that are completely submerged or have a majority of their foliage under water� •There is no restriction on the use of treated water for irrigation, recreation or domestic purposes� •Consult local and state fish and game agency and water control authorities before applying this product to public water� Permits may be required to treat such water� •To make aquatic applications around and within 1/2 mile of active potable water intakes, the water intake must be turned off for a minimum period of 48 hours after the application� The water intake may be turned on prior to 48 hours if the glyphosate level in the intake water is below 0�7 parts per million as determined by laboratory analysis� These aquatic applications may be made only in those cases where there are alternative water sources or holding ponds which would permit the turning off of an active potable water intake for a minimum period of 48 hours after the application� •For treatments after draw down of water or in dry ditches, allow 7 days or more after treatment before reintroduction of water to achieve maximum weed control� Apply this product within 1 day after draw down to ensure application to actively growing weeds� •Floating mats of vegetation may require retreatment up to the labeled rate� Avoid wash off of sprayed foliage by spray boat or recreational boat backwash or by rainfall within 6 hours of application� Do not re- treat within 24 hours following the initial treatment� •Applications made to moving bodies of water must be made while traveling upstream to prevent concentration of this herbicide in water� When making any bankside applications, do not overlap more than 1 foot into open water� Do not spray in bodies of water where weeds do not exist� The maximum application rate of 7 1/2 pints per acre must not be exceeded in any single broadcast application that is being made over water� •When emerged infestations require treatment of the total surface area of impounded water, treating the area in strips may avoid oxygen depletion due to decaying vegetation� Oxygen depletion may result in fish kill� Restrictions: •Do not apply this product directly to water within 1/2 mile upstream of an active potable water intake in flowing water (i�e�, river, stream, etc�), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond or reservoir� This restriction does not apply to intermittent inadvertent overspray of water in terrestrial use sites� Wetland Sites This product may be applied to undesirable vegetation in and around water (aquatic areas) and wetlands found in forestry, utility rights-of- way sites or other site listed on the label, including where these sites are adjacent to or surrounding domestic water supply reservoirs, supply streams, lakes and ponds� If wetland sites are present, read and observe the following directions: • There is no restriction on the use of treated water for irrigation, recreation or domestic purposes� • Consult local public water control authorities before applying this product in and around public water� Permits may be required to treat in such areas� Restrictions: • Do not apply this product directly to water within 1/2 mile upstream of an active potable water intake in flowing water (i�e�, river, stream, etc�), or within 1/2 mile of an active potable water intake in a standing body of water, such as a lake, pond or reservoir� This restriction does not apply to intermittent inadvertent overspray of water in terrestrial use sites� • Do not spray open bodies of water where woody brush, trees and herbaceous weeds do not exist� Do not apply more than 3 3/4 quarts per acre in a single over water broadcast application except in stream crossings in utility right-of-way or where applications will result in less than 20 percent of the total water area being treated� In either of these locations, any specified rate may be applied: Christmas Tree Plantations Broadcast Application (Oregon and Washington Only) Broadcast apply this product over the established Christmas tree species Douglas fir (Pseudotsuga menziesii), fir species (Abies spp�), and pine species (Pinus spp�) (except eastern white, loblolly, longleaf, shortleaf, slash), and spruce species (Picea spp�)� Use 1 quart of this product per acre in 5 to 30 gallons of water per acre� For best results, add up to 10 fl oz of Entry II surfactant per acre� If using a different surfactant, follow the manufacturer’s directions for use and ensure conifer safety has been adequately tested for that surfactant� Apply after trees have completed at least a full growing season since planting or transplanting� Plan Set Date: July 30, 2025 7 Specimen Label Revised 10-01-19 Apply only in the fall after the formation of the final conifer resting buds or in the spring prior to initial bud swell� Final resting buds must be fully hardened and in the dormant stage� Applying this product at any other time may result in unacceptable injury to the Christmas trees� Avoid spray pattern overlap as injury may occur� In some areas, 1 to 2 quarts of this product per acre may be used� Consult your local representative for specific use instructions if rates greater than 1 quart per acre are required� For best results, do not use drift control additives as they may increase injury to Christmas trees� Precautions: • Ensure that adequate buffers are maintained to prevent drift onto nearby desirable crops or vegetation� Restrictions: • Preharvest Interval: Do not apply within 1 full year prior to tree harvest� Cut Stump Treat cut stumps in any noncrop site listed on this label� This product will control regrowth of freshly cut stumps and resprouts of many types of woody brush and tree species, some of which are listed below� Apply this product using suitable equipment to ensure coverage of the entire cambium� Cut trees or resprouts close to the soil surface� Apply a 50 to 100 percent solution of this product to freshly cut surface immediately after cutting� Delays in application may result in reduced performance� For best results, make applications during periods of active growth and full leaf expansion� When used according to directions for cut stump application, this product will control, partially control or suppress most woody brush and tree species, some of which are listed below: Common Name Scientific NamealderAlnus spp�coyotebrush1 Baccharis pilularisdogwood1Cornus spp�eucalyptus Eucalyptus spp�hickory1 Carya spp�madrone, Pacific Arbutus menziesiimaple1Acer spp�oak Quercus spp�peppertree, Brazilian Schinus terebinthifoliusAustralian-pine,Casuarina equisetifoliapoplar1Populus spp�reed, giant Arundo donaxsaltcedarTamarix ramosissimasweetgum1Liquidambar styracifluasycamore1Platanus occidentalistan oak Lithocarpus densifloruswillowSalix spp� 1Do not use this product on these species in the state of California� Precautions: • Adjacent trees that are of a similar age, height and spacing may indicate shared roots� • Injury is likely to occur to non-treated stems or trees when one tree or more that shares a common root is treated� Restrictions: • Do not make cut stump applications when the roots of desirable woody brush or trees may be grafted to the roots of the cut stump� Some sprouts, stems, or trees may share the same root system� Injection and Frill (Woody Brush and Trees) Woody vegetation may be controlled by injection or frill application of this product� Apply this product using suitable equipment that penetrates into the living tissue� Apply the equivalent of 1 mL of this product per each two to three inches of trunk diameter at breast height (DBH)� This is best achieved by applying 50 to 100 percent concentration of this product either to a continuous frill around the tree or as cuts evenly spaced around the tree below all branches� As tree diameter increases in size, better results are achieved by applying diluted material to a continuous frill or more closely spaced cuttings� Do not make any applications that allow runoff to occur from frilled or cut areas in species that exude sap freely� In species such as this, make frill or cuts at an oblique angle to produce a cupping effect and use a 100 percent undiluted concentration of this product� For best results, apply during periods of active growth and full leaf expansion� This product controls the following woody species: Common Name Scientific NameoakQuercus spp�poplar Populus spp.sweetgum Liquidambar styracifluasycamorePlatanus occidentalis This product suppresses the following woody species: Common Name Scientific Nameblackgum1Nyssa sylvaticadogwoodCornus spp�hickory Carya spp�maple, red Acer rubrum 1Do not use this product on these species in the state of California� Forestry Site Preparation This product is for the control or partial control of woody brush, trees, and herbaceous weeds in forestry� This product is also for use in preparing or establishing wildlife openings within these sites and maintaining logging roads� In forestry sites, use this product in site preparation prior to planting any tree species including Christmas trees, eucalyptus, hybrid tree cultivars and silvicultural nursery sites� Unless otherwise specified, make applications of this product for control or partial control of herbaceous weeds, woody brush and trees listed in the Weeds Controlled section� Application Rates Method of Application Rate Spray Volume (gal/acre) Broadcast aerial 1�5 - 7�5 qt/acre 5 - 30 ground 10 - 60 Spray to Wet handgun, backpack 0�75 - 2%spray to wet mistblower by volume Low Volume Directed Spray1 handgun, backpack 5 - 10%partial coverage mistblower by volume 1 For low volume directed spray applications, coverage should be uniform with at least 50% of the foliage contacted� For best results, coverage of the top one-half of the plant, including the growing tip, is important (over the top and down coverage) To ensure adequate spray coverage, spray all sides of large or tall woody brush and trees, when foliage is thick and dense, or where there are multiple sense or tall sprouts� Use a higher rate in the rate range for control or partial control of woody brush, trees and hard to control perennial herbaceous weeds� For best results, apply to actively growing woody brush and trees after full leaf expansion and before leaf drop� Use increased rates within the rate range to control perennial herbaceous weeds from emergence up to the appearance of seedheads, flowers or berries� Use a lower rate in the rate range to control annual herbaceous weeds and actively growing perennial herbaceous weeds after seedheads, flowers or berries appear� Apply to foliage of actively growing annual herbaceous weeds anytime after emergence� This product has no herbicidal or residual activity in the soil� Where repeat applications up to the labled rate are necessary, do not apply more than 8 quarts of product per acre per year� Tank Mixes This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled� When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Note: For forestry site preparation, make sure the tank mix product is approved for use prior to planting the desired species� Observe planting interval restrictions� Any specified rate of this product may be used in a tank mix with the following products for forestry site preparation: Product Milestone VM Garlon 3A Garlon 4 Arsenal Applicators Concentrate Escort Chopper Oust XP Arsenal Applicators Concentrate Arsenal Applicators Concentrate Plan Set Date: July 30, 2025 8 Specimen Label Revised 10-01-19 For control of herbaceous weeds, use the lower specified tank mixture rates� For control of dense stands or difficult to control woody brush and trees, use the higher specified rates� Aerial Application Aerially apply this product by helicopter only in forestry sites� See Aerial Application in Application Equipment and Application Methods for more details� Ground Application Apply this product using suitable ground equipment for broadcast applications in forestry sites� See Ground Application in Application Equipment and Application Methods for more details� Unless otherwise specified, apply the specified rates of this product as a broadcast spray in sufficient spray volume to provide complete and uniform coverage of plant foliage� Check for even distribution throughout the spray pattern� Hand-Held and Backpack Application Apply this product using handgun and backpack equipment in forestry sites� See Hand-Held and Backpack Application in Application Equipment and Application Methods for more details� For spray to wet applications, coverage should be uniform and complete, but not to the point of runoff� This product may be used for low volume directed sprays for spot treatment of trees and brush� It is most effective in areas where there is a low density of undesirable trees or brush� For flat fan and cone nozzles, spray the foliage of the targeted vegetation� Small, open branched trees need only be treated from one side� If the foliage is thick or there are multiple root sprouts, apply from several sides to ensure adequate spray coverage� Forestry Conifer and Hardwood Release Directed Sprays and Selective Equipment Apply this product as a directed spray or with selective equipment in forestry conifer and hardwood sites, including Christmas tree plantations and silvicultural nurseries� A surfactant must be used with this product� Use only surfactants approved for conifer release and specified on the surfactant label as safe for use in conifer release (pine release)� Using this product without a surfactant will result in reduced herbicide performance� See Mixing Directions and Application Equipment and Application Methods sections� Avoid contact of spray drift, mist or drips with foliage, green bark or non- woody surface roots of desirable plant species� Tank Mixes: When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Broadcast Application Outside Area of Southeastern United States Apply this product as a broadcast application for release of Douglas fir (Pseudotsuga menziesii), fir (Abies species), hemlock (Tsuga species), pines (Pinus species) (includes all species except loblolly, longleaf, shortleaf, or slash), and California redwood (Sequoia species) outside the area of the southeastern United States� Apply this product as a broadcast application only after formation of final conifer resting buds in the fall or prior to initial bud swelling in the spring� Note: Except where specified, make broadcast applications of this product only where conifers have been established for more than one year� Injury may occur to conifers treated for release, especially where spray patterns overlap or the higher labeled rate is applied� Damage can be accentuated if applications are made when conifers are actively growing, are under stress from drought, flood water, improper planting, insects, animal damage or diseases� Apply 3/4 to 1 1/2 quarts per acre as a broadcast spray� Apply 3/4 to 1 1/8 quarts of this product per acre to release Douglas fir, pine and spruce species at the end of the first growing season (except California)� Ensure all conifers are well hardened off� A surfactant must be used with this product for optimum weed control� Use only surfactants approved for use in over the top release applications� Using this product without a surfactant will result in reduced herbicide performance� For best results, do not use a surfactant for release of hemlock species or California redwood� In mixed conifer stands, injury to these species may result if a surfactant is used� See Mixing Directions and Application Equipment and Application Methods sections� For release of Douglas fir, a nonionic surfactant for over the top foliar spray may be used� To avoid possible conifer injury, use nonionic surfactants at 2 fl oz per acre at elevations above 1500 feet, or 1 fl oz per acre in the coastal range or at elevations below 1500 feet� Using a higher rate of surfactant may result in unacceptable conifer injury� Ensure the nonionic surfactant has been adequately tested for safety to Douglas fir before using� Tank Mixes with Oust XP: Apply 3/4 to 1 1/2 quarts of this product with the labeled rate of Oust XP per acre to release jack pine and white� Use the labeled rate of Oust XP per acre with this product to release white pine� Make applications to actively growing weeds as a broadcast spray over the top of established conifers� Make applications after formation of conifer resting buds in the late summer or fall� Tank Mixes with Arsenal Applicators Concentrate: Apply 3/4 to 1 1/8 quarts of this product with the labeled rate of Arsenal Applicators Concentrate per acre to release Douglas fir� Apply 1 1/2 quarts of this product with the labeled rate of Arsenal Applicators Concentrate per acre to release balsam fir and red spruce� In Maine and New Hampshire, apply up to 2 1/4 quarts of this product per acre to control or suppress difficult to control hardwood species� For the release of red pine, balsam fir, red spruce, white spruce, Norway spruce, and black spruce with dense tough to control brush, and where maples make up a large component of the undesirable trees, this product may be tank mixed with the labeled rate of Arsenal Applicators Concentrate and the labeled rate of Oust XP per acre� Apply this mix as a broadcast spray� Broadcast Application in Southeastern United States Apply this product as a broadcast application for release of loblolly pine (Pinus taeda), eastern white pine (Pinus strobus), shortleaf pine (Pinus echinata), slash pine (Pinus elliottii), Virginia pine (Pinus virginiana), and longleaf pine (Pinus palustris) in the southeastern United States� Apply 1 1/8 to 1 7/8 quarts of this product per acre as a broadcast spray during late summer or early fall after the conifers have hardened off� For applications at the end of the first growing season, use 3/4 quart of this product alone or in a tank mix� Tank Mixes with Arsenal Applicators Concentrate: For conifer release, apply 3/4 to 1 1/2 quarts of this product with the labeled rate of Arsenal Applicators Concentrate per acre as a broadcast spray� Use only on conifer species that are labeled for over the top spray for both products� Use the higher specified rates for dense tough to control wood brush and trees� Herbaceous Release When applied as directed, this product plus listed residual herbicides provide postemergence control of the annual weeds and control or suppression of the perennial weeds listed in this label, and residual control of the weeds listed in the residual herbicide label� Make applications to actively growing weeds as a broadcast spray over the top of labeled conifers� Use a surfactant labeled for use in over the top herbaceous release applications� Using this product without a surfactant will result in reduced herbicide performance� See Mixing Directions and Application Equipment and Application Methods sections on this label� Weed control may be reduced if spray solution water volumes exceed 25 gallons per acre for these treatments� Tank Mixes with Oust XP: Apply 12 to 18 fl oz of this product with the labeled rate of Oust XP per acre to release loblolly pines� Apply 9 to 12 fl oz of this product with the labled rate of Oust XP per acre to release slash pines� Tank Mix with Atrazine: Apply 3/4 quarts of this product with 4 lb ai of atrazine per acre to release Douglas fir� Apply only over Douglas fir that has been established for at least one full growing season� Apply in the early spring, usually mid-March through early April� Injury will occur if applications are made after bud swell in the spring� For this use, do not add surfactant to the tank mix� In Maine and New Hampshire, for release of red pine, balsam fir, red spruce, white spruce, Norway spruce, and black spruce with heavy grass and herbaceous weeds infesting the site, up to 2 1/4 quarts of this product per acre may be tank mixed with the labled rate of Oust XP to control grass, herbaceous weeds and woody brush� Apply this mix as a broadcast spray� Mid-Rotation Conifer Release and Spot Treatments for Crop Tree Release and Timber Stand Improvement This product is applied as a ground broadcast or directed spray application for mid-rotation release applications under the canopy of pines (and other conifers) and hardwoods� Make applications using application techniques that prevent or minimize direct contact to the foliage of crop trees (including in stands of pine, other conifers, or hardwood)� This may be accomplished using directed sprays and ground equipment with nozzles oriented to target only undesirable understory vegetation below the crop tree canopy� This product is applied as a spot, individual plant treatment for woody and herbaceous weeds (see Hand-Held and Backpack Application in Application Equipment and Application Methods section)� When making spot applications, do not allow spray to contact the foliage of desirable crop trees� Plan Set Date: July 30, 2025 9 Specimen Label Revised 10-01-19 Broadcast Application for Control of Undesirable Competitive Vegetation in Larch (Larix spp.) Plantations in Maine Apply this product to control or reduce competition from undesirable vegetation in Larch (Larix spp�) plantations in the state of Maine� Application Timing Apply only after lignification has occurred in 50% or more of the current year's terminal growth� Application Directions Broadcast Spray: Use 1 to 3 quarts of this product per acre� Apply in a total spray volume of 10 to 60 gallons per acre using ground equipment or 5 to 15 gallons per acre if applied aerially� Up to 30 fl oz of Entry II surfactant may be added� Directed Sprays: This product may be applied as a directed spray for competitive release of larch� Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface roots of desirable plants� See Application Equipment and Application Methods of the product label� Injury to larch may occur, especially where spray patterns overlap or higher labeled rates of this product or surfactant were applied� Damage can be accentuated if application is made when larch is actively growing or is under stress� Make applications only if some level of injury to larch is acceptable� Noncrop Areas and Industrial Sites See the rate tables in the Annual Weeds, Perennial Weeds, and Woody Brush and Trees sections for specific application rates� This product has no herbicidal or residual activity in the soil� Where repeat applications up to the labeled rate are necessary, do not apply more than 8 quarts of this product per acre per year� Use a higher rate in the rate range for control or partial control of woody brush, trees, and hard to control perennial herbaceous weeds� For best results, apply to actively growing woody brush and trees after full leaf expansion and before fall color and leaf drop� Use increased rates within the rate range for difficult to control species, where dense stands occur, or where conditions for control are not ideal and to control perennial herbaceous weeds from emergence up to the appearance of seedheads, flowers or berries� Use a lower rate in the rate range to control annual herbaceous weeds and actively growing perennial herbaceous weeds after seedheads, flowers or berries appear� Apply to foliage of actively growing annual herbaceous weeds anytime after emergence� Tank Mixing for Noncrop Areas This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled� When tank mixing, read and observe applicable use directions, precautions and limitations on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Maintain good agitation at all times during the mixing process and application� Ensure that the tank mix product(s) is well mixed with the spray solution before adding this product� Mix only the amount of spray solution that will be used during the same day� Reduced weed control may result if a tank mixture is allowed to stand overnight� If the spray mix is allowed to settle, thorough agitation is required to resuspend the mixture before spraying is resumed� Weed Control, Trim and Edge, and Bare Ground This product may be used in general noncrop and non-food areas� It may be applied with any application equipment described in this label� This product may be used to trim and edge around objects in noncrop sites, for spot treatment of unwanted vegetation, and to eliminate unwanted weeds growing in established shrub beds or ornamental plantings� This product may be used prior to planting an area to ornamentals, flowers, turfgrass (sod or seed), or prior to laying asphalt or beginning construction projects� To maintain bare ground, repeated applications up to the labeled rate of this product may be used� This product provides control of emerged annual weeds and control or partial control of emerged perennial weeds, woody brush and trees when applied in a tank mix to bare ground� Turfgrass Renovation, Seed or Sod Production This product controls most existing vegetation prior to renovating turfgrass areas or establishing turfgrass grown for seed or sod� For maximum control of existing vegetation, delay planting or sodding to determine if any regrowth from escaped underground plant parts occurs� When repeat treatments are necessary, sufficient regrowth must be attained prior to application� For warm season turfgrass, including bermudagrass, summer or fall applications provide the best control� Where existing vegetation is growing under mowed turfgrass management, apply this product after omitting at last one regular mowing to allow sufficient grown for good interception of the spray� Do not disturb soil or underground plant parts before treatment� Delay tillage or renovation techniques, including vertical mowing, coring, or slicing, for seven days after application to allow translocation into underground plant parts� Desirable turfgrass may be planed following the above procedures� Hand-held equipment may be used for spot treatment of unwanted vegetation growing in existing turfgrass� Broadcast or hand-held equipment may be used to control sod remnants or other unwanted vegetation after sod is harvested� Do not feed or graze turfgrass grown for seed or sod production for eight weeks following application� Ornamentals and Plant Nurseries Post-Direct and Trim and Edge This product may be used as a post-directed spray around established woody ornamental species, including arborvitae, azalea, boxwood, crabapple, euonymus, fir, Douglas fir, jojoba, hollies, lilac, magnolia, maple, oak, provet, pine, spruce and yew� This product may also be used to trim and edge around trees, buildings, sidewalks and roads, potted plants and other objects in a nursery setting� Desirable plants may be protected from the spray solution by using shields or coverings made of cardboard or other impermeable material� Do not use this product for any over the top broadcast spray in ornamentals� Exercise care to avoid contact of spray, drift or mist with foliage or green bark of established ornamental species� Site Preparation This product may be used prior to planting any ornamental, nursery or Christmas tree species� Greenhouse/Shadehouse This product may be used to control weeds growing in and around greenhouses and shadehouses� Desirable vegetation must not be present during application and air circulation fans must be turned off� Wildlife Habitat Management This product may be used to control exotic and other undesirable vegetation in habitat management and natural areas, including rangeland and wildlife refuges� Apply to allow recovery of native plant species, prior to planting desirable native species, and for broad spectrum vegetation control� Apply spot treatments to selectively remove unwanted plants for habitat enhancement� Wildlife Food Plots This product may be used as a site preparation treatment to control annual and perennial weeds prior to planting wildlife food plots� Any wildlife food species may be planted after applying this product, or native species may be allowed to repopulate the area� If tillage is needed to prepare a seedbed, wait 7 days after application before tilling to allow translocation into underground plant parts� Hollow Stem Injection Apply this product to control giant knotweed (Polygonum sachalinense), Japanese knotweed (Polygonum cuspidatum), or other invasive knotweeds using individual stem treatment� Use a hand-held injection device that delivers the specified amount of this product into these hollow stem plants� Make a hole through both sides of the stem about 6 inches above the ground, just below a node, using an awl or other pointed tool� Inject 5 mL of undiluted product directly into this hole in the hollow stem� Treat each stem of the knotweed plant� Restrictions: • Do not apply more than a total of 8 quarts of this product per acre for all treatments combined� At 5 mL per stem, 7�5 quarts will treat approximately 1420 stems per acre� Parks, Recreational and Residential Areas Use this product in parks, recreational and residential areas� Apply it with any application equipment described in this label� Use this product to trim and edge around trees, fences, paths, around buildings, sidewalks, and other objects in these areas� This product may be used for spot treatment of unwanted vegetation, eliminate unwanted weeds growing in established shrub beds or ornamental plantings, and prior to planting an area to ornamentals, flowers, turfgrass (sod or seed), or prior to laying asphalt or beginning construction projects� All of the label instructions apply to park and recreational areas� Railroads All of the instructions in the Noncrop Areas and Industrial Sites and Roadside sections apply to railroads� Plan Set Date: July 30, 2025 10 Specimen Label Revised 10-01-19 Bare Ground, Ballast and Shoulders, Crossings, and Spot Treatment Use this product to maintain bare ground on railroad ballast and shoulders� Repeat applications up to the labled rate of this product may be used as weeds emerge to maintain bare ground� Use this product to control tall growing weeds to improve line of sight at railroad crossings and reduce the need for mowing along rights-of-way� Brush Control Apply 3 to 8 quarts of this product per acre as a broadcast spray, using boom-type or boomless nozzles� Applications up to 80 gallons of spray solution per acre may be used� Apply a 3/4 to 1�5 percent solution of this product when using high volume spray to wet applications� Apply a 5 to 10 percent solution of this product when using low volume directed sprays for spot treatment� Roadsides All of the instructions in the Noncrop Areas and Industrial Sites and Railroads sections apply to roadsides� Shoulder Treatments Use this product on road shoulders� Apply it with boom sprayers, shielded boom sprayers, high volume off-center nozzles, OC nozzle clusters, manifold nozzle systems, hand-held equipment, and similar equipment, and under-deck mowing plus herbicide systems� Guardrails and Other Obstacles to Mowing Use this product to control weeds growing under guardrails and around signposts and other objects along the roadside� Spot Treatment Use this product as a spot treatment to control unwanted vegetation growing along roadsides� Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control� Follow applicable use directions, precautions and limitations on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Chemical Mowing Perennials: This product suppresses perennial grasses listed in this section to serve as a substitute for mowing� Use 4�5 fl oz of this product per acre when treating Kentucky bluegrass, tall fescue, fine fescue, orchardgrass, or quackgrass� Apply 12 fl oz of this product per acre when treating bermudagrass� Apply 4�5 to 8 fl oz of this product per acre when treating bahiagrass� Use the higher labled rates when grass is under heat stress� Apply 3 pints of this product per acre when treating torpedograss or paragrass� Apply treatments in 10 to 20 gallons of spray solution per acre� Annuals: For growth suppression of some annual grasses, including annual ryegrass, wild barley and wild oats growing in coarse turfgrass on roadsides or other industrial areas, apply 3 to 3�75 fl oz of this product in 10 to 40 gallons of spray solution per acre� Apply when annual grasses are actively growing and before the seedheads are in the boot stage of development� Treatments may cause injury to the desired grasses� Release of Dormant Bermudagrass or Bahiagrass Apply 6 to 48 fl oz of this product per acre in 10 to 40 gallons of water per acre� Use only in areas where bermudagrass or bahiagrass are desirable groundcovers and where some temporary injury or discoloration can be tolerated� Treatments of more than 12 fl oz per acre may result in injury or delayed greenup in highly maintained areas, including golf courses and lawns� For best results on winter annuals, treat when weeds are in an early growth stage (less than 6 inches in height) after most have germinated� For best results on tall fescue, treat when fescue is in or beyond the 4- to 6-leaf stage� Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control� When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Actively Growing Bermudagrass Use this product to control or partially control many annual and perennial weeds for effective release of actively growing bermudagrass� Use only in areas where some temporary injury or discoloration can be tolerated� Use only on well-established bermudagrass� Bermudagrass injury may result from the treatment, but regrowth will occur under moist conditions� Repeat applications of the tank mix in the same season are not recommended because severe injury may occur� Apply up to 2�25 pints of this product in 10 to 40 gallons of spray solution per acre� Use the lower rate when treating annual weeds less than 6 inches in height (or runner length)� Use the higher labled rate as weeds increase in size or as they approach flower or seedhead formation� Actively Growing Bahiagrass For suppression of vegetable growth and seedhead inhibition of bahiagrass for approximately 45 days, apply 4�5 fl oz of this product in 10 to 40 gallons of water per acre� Apply one to two weeks after full greenup or after mowing to a uniform height of 3 to 4 inches� Make this application prior to seedhead emergence� For suppression up to 120 days, apply 3 fl oz of this product per acre, followed by an application of 1�5 to 3 fl oz per acre about 45 days later� Make no more than two applications per year� Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control� When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Utility Sites Use this product for control of brush, tree, and weed control and side trimming in areas including electrical power, pipeline and telephone rights- of-ways, and other sites associated with these rights-of-ways including substations, roadsides, and railroads� This product may be applied with any application equipment or method described on this label unless specifically prohibited� Tank Mixes: This product may be used in tank mix combination with other herbicide products to broaden the spectrum of vegetation controlled and for residual weed control� When tank mixing, read and follow all applicable use directions, precautions, and limitation on the respective product labels� Use according to the most restrictive precautionary statements for each product in the mixture� Any specified rate of this product may be used in a tank mix� Rangelands Use this product to control or suppress many annual weeds growing in perennial cool and warm season grass rangelands� Preventing weed seed production is critical to the successful control of annual grassy weeds invading these perennial grass sites� Eliminate most of the viable seeds with follow up applications in sequential years� Delay grazing of treated areas to encourage growth of desirable perennials� Allowing desirable perennials to flower and reseed in the treated area will encourage successful transition� Bromus: Use this product to control or suppress downy brome/ cheatgrass (Bromus tectorum), Japanese brome (Bromus japonicus), soft chess (Bromus mollis), cheat (Bromus secalinus), cereal rye, and jointed goatgrass� Apply 6 to 12 fl oz of this product per acre as a broadcast treatment� For best results, coincide treatments with early seedhead emergence of the most mature plants� Delaying the application until this growth stage maximizes the emergence of other weedy grass flushes� Make applications to the same site each year until seed banks are depleted and the desirable perennial grasses become established on the site� Medusahead: Apply 12 fl oz of this product per acre to control or suppress medusahead at the 3-leaf stage when plants are actively growing� Delaying applications beyond this stage results in reduced or unacceptable control� Repeat applications in subsequent years to eliminate the seed bank before reestablishing desirable perennial grasses� Apply in the fall or spring� Apply by ground or air� Make aerial applications for these uses with fixed wing or helicopter equipment� For aerial applications, apply in 2 to 10 gallons of water per acre� For ground applications, apply in at least 10 to 20 gallons of water per acre� Spot Treatment and Wiper Application Apply this product in rangeland, pastures, or industrial sites as a spot treatment or over the top of desirable grasses using wiper applicators to control tall weeds� See Wiper Application section for specific instructions� Make repeat applications up to the labeled rate in the same area at 30-day intervals� The entire site or any portion of it may be treated when using 2�25 quarts or less of this product per acre for spot treatments or wiper applications� No more than 10 percent of the total site may be treated at any one time when using more than 2�25 quarts of this product per acre for spot treatments or wiper applications� To achieve maximum performance, remove domestic livestock before application and wait 7 days after application before grazing livestock or harvesting for feed� Plan Set Date: July 30, 2025 11 Specimen Label Revised 10-01-19 Pastures Type of Pastures: Bahiagrass, bermudagrass, bluegrass, brome, fescue, orchardgrass, ryegrass, timothy, wheatgrass, alfalfa, clover Spot Treatment and Wiper Application This product may be applied as a spot treatment or as a wiper application� Make applications in the same area at 30-day intervals� See Wiper Application section for specific instructions� Precautions: • For spot treatment and wiper applications, the entire field or any portion of it may be treated when using a rate of 2�25 quarts or less per acre� • To achieve maximum performance, remove domestic livestock before application and wait 14 days after application before grazing livestock or harvesting� Restrictions: • Do not treat more than 10 percent of any acre at one time if applying more than 2�25 quarts per acre as a spot treatment or wiper application� Preplant, Preemergence, and Pasture Renovation Apply this product prior to planting or emergence of forage grasses and legumes� In addition, this product may be used to control perennial pasture species listed on this label prior to re-planting� Precautions: • If the application rates total 2�25 quarts or less per acre, there is no waiting period between treatment and feeding or livestock grazing is required� • If the application rates total more than 2�25 quarts per acre, remove domestic livestock before application and wait eight weeks after application before grazing or harvesting� Restrictions: • Crops listed for treatment in this label may be planted into the treated area at any time� Wait 30 days between application and planting for all other crops� Bamboo Use this product on roadside rights-of way to control or suppress bamboo� Use the higher rate in the rate range for dense stands and larger plants� Mow or cut bamboo and allow it to resprout to have sufficient foliage in order for the spray solution to completely cover the foliage� Optimum control or suppression of bamboo is achieved when this product is applied between August and October (prior to frost)� One application of this product plus a surfactant will not eradicate bamboo� Several mowings and applications are required to completely control bamboo� Apply the specified rate plus a surfactant (1/4 to 1/2% v/v), such as a nonionic surfactant containing 80% active ingredient or more� Using this product without a surfactant results in reduced performance� Application Method Rate Spray Volume (gal/acre) ground broadcast 1�5 – 7�5 qt/acre 10 - 60 handgun spray to wet 0�75 – 2%spray to wet handgun or backpack low volume directed spray 4 – 10%spray to cover Restrictions: • Do not apply more than a total of 8 quarts of this product per acre per year� Annual Weeds, Perennial Weeds, and Woody Brush and Trees Annual Weeds Apply 24 fl oz of this product per acre if weeds are less than 6 inches in height or runner length� Use 1�25 to 3 quarts of this product per acre if weeds are more than 6 inches in height or runner length or when weeds are growing under stressed conditions� Use a higher rate in the rate range for tough to control species regardless of the size of the weed at the time of application� Treat tough to control weeds when they are relatively small� Tank mix this product with only those products that are labeled for application at the target site� Refer to the label of the tank mix partner for use sites and application rates� Apply a 0�4 percent solution of this product as a spray to wet application to weeds less than 6 inches in height or runner length� Use a 0�7 to 1�5 percent solution for annual weeds more than 6 inches tall or for smaller weeds growing under stressed conditions� Use the higher concentration for tough to control species or for weeds more than 24 inches tall� Apply prior to seedhead formation in grass or bud formation in broadleaf weeds� Use a 4 to 7 percent solution of this product for low volume directed spray applications� Spray coverage should be uniform with at least 50 percent of the foliage contacted� For best results, cover the top one- half of the plant� To ensure adequate spray coverage, spray both sides of large or tall weeds when foliage is thick and dense or where there are multiple sprouts� Common Name Scientific Nameanoda, spurred Anoda cristatabalsamapple1Momordica charantiabarleyHordeum vulgarebarnyardgrassEchinochloa crus-gallibassia, fivehook Bassia hyssopifoliabittercressCardamine spp�bluegrass, annual Poa annuabluegrass, bulbous Poa bulbosabrome, downy/cheatgrass Bromus tectorumbrome, Japanese Bromus japonicusbuttercupRanunculus spp.Carolina foxtail Alopecurus carolinianusCarolina geranium Geranium carolinianumcastorbeanRicinus communischamomile, mayweed Anthemis cotulacheatBromus secalinuschervilAnthriscus cerefoliumchickweedCerastium vulgatumcocklebur, common Xanthium strumariumcoreopsis, plains Coreopsis tinctoriacorn, volunteer Zea mayscrabgrassDigitaria spp�dwarfdandelion, Virginia Krigia virginicaeastern mannagrass Glyceria spp�eclipta Eclipta prostratafalsedandelionPyrrhopappus carolinianusfalseflax, smallseed Camelina microcarpafiddleneckAmsinckia spp�field pennycress Thlaspi arvensefleabane, annual Erigeron annuusfleabane, hairy Conyza bonariensisfleabane, rough Erigeron strigosusFlorida pusley Richardia scabrafoxtailSetaria spp�goatgrass, jointed Aegilops cylindricagoosegrassEleusine indicagroundsel, common Senecio vulgarishenbitLamium amplexicaulehorseweed/marestail Conyza canadensisitchgrassRottboellia cochinchinensisjohnsongrassSorghum halepensejunglericeEchinochloa colonaknotweedPolygonum spp�kochia2 Kochia scoparialambsquarters, common Chenopodium albummallow, little Malva parvifloramedusaheadTaeniatherum caput-medusaemorningglory Ipomoea spp�mustard, blue Chorispora tenellamustard, tumble Sisymbrium altissimummustard, wild Sinapis arvensisoats, wild Avena fatuapanicum, fall Panicum dichotomiflorumpigweed, redroot Amaranthus retroflexuspigweed, smooth Amaranthus hybridusprickly lettuce Lactuca serriolapuncturevineTribulus terrestrispurslane, common Portulaca oleracearagweed, common Ambrosia artemisiifoliaragweed, giant Ambrosia trifidarocket, London Sisymbrium irioRussian-thistle Salsola tragusrye, cereal Secale cerealeryegrass, Italian3 Lolium perennesandbur, field Cenchrus spinifexsesbania, hemp Sesbania herbaceashattercaneSorghum bicolorshepherd’s-purse Capsella bursa-pastorissicklepodSenna obtusifoliasignalgrass, broadleaf Urochloa platyphyllasmartweed, Pennsylvania Polygonum pensylvanicumsowthistle, annual Sonchus oleraceusSpanishneedles3Bidens bipinnataspeedwell, corn Veronica arvensisspeedwell, purslane Veronica peregrinasprangletopLeptochloa spp�spurge, annual Chamaesyce spp�spurge, prostrate Chamaesyce humistrataspurge, spotted Chamaesyce maculataspurry, umbrella Holosteum umbellatumstinkgrassEragrostis cilianensissunflower, common Helianthus annuustansymustard, pinnate Descurainia pinnatateaweed/sida, prickly Sida spinosaTexas panicum Panicum spp� Plan Set Date: July 30, 2025 12 Specimen Label Revised 10-01-19 Common Name (Cont.)Scientific NamevelvetleafAbutilon theophrastiVirginia pepperweed Lepidium virginicumwheatTriticum aestivumwitchgrassPanicum capillarewoolly cupgrass Eriochloa villosayellow rocket Barbarea vulgaris 1Apply with hand-held equipment only� 2Do not treat kochia in the button stage� 3Apply 3 pints of product per acre� Perennial Weeds Best results are obtained when perennial weeds are treated after they reach the reproductive stage of growth (seedhead initiation in grasses and bud formation in broadleaves)� Best results are obtained when non- flowering plants are treated when they reach a mature stage of growth� In many situations, applications are required prior to these growth stages� Under these conditions, use a higher rate in the rate range� When using spray to wet treatments with hand-held equipment, ensure thorough coverage of the plant� For best results, use a 1�5 percent solution on harder to control perennials including bermudagrass, dock, field bindweed, hemp dogbane, milkweed and Canada thistle� Use a 4 to 7 percent solution of this product in low volume directed spray applications� Spray coverage should be uniform with at least 50 percent of the foliage contacted� For best results, cover the top one-half of the plant� To ensure adequate spray coverage, spray both sides of large or tall weeds when foliage is thick and dense or where there are multiple sprouts� Allow 7 days or more after application before tillage� Common Name Scientific Namealfalfa Medicago sativaalligatorweed1 Alternanthera philoxeroidesanise/fennel Foeniculum vulgareartichoke, Jerusalem Helianthus tuberosusbahiagrass Paspalum notatumbeachgrass, European Ammophila arenariabentgrassAgrostis spp�bermudagrass Cynodon dactylonbindweed, field Convolvulus arvensisbluegrass, Kentucky Poa pratensisblueweed, Texas Helianthus ciliarisbrackenfernPteridium aquilinumbrome, smooth Bromus inermisbursage, woollyleaf Ambrosia grayicanarygrass, reed Phalaris arundinaceacattail Typha spp�clover, red Trifolium pratenseclover, white Trifolium repenscogongrass Imperata clylindricacordgrass Spartina spp.cutgrass, giant1 Zizaniopsis miliaceadallisgrass Paspalum dilatatumdandelion Taraxacum officinaledock, curly Rumex crispusdogbane, hemp Apocynum cannabinumfescue Festuca spp�fescue, tall Lolium arundinaceumGerman ivy Senecio mikanioidesguineagrass Urochloa maximahorsenettle Solanum carolinensehorseradishArmoracia rusticanaiceplant, crystalline Mesembryanthemum crystallinumjohnsongrass Sorghum halepensekikuyugrass Pennisetum clandestinumknapweed, Russian Acroptilon repenslantana, largeleaf Lantana camaralespedeza, common Kummerowia striatalespedeza, sericea Lespedeza cuneataloosestrife, purple Lythrum salicarialotus, American Nelumbo luteamaidencane Panicum hemitomonmilkweed Asclepias spp�muhly, wirestem Muhlenbergia frondosamullein, common Verbascum thapsusnapiergrass Pennisetum purpureumnightshade, silverleaf Solanum elaeagnifoliumnutsedge, purple Cyperus rotundusnutsedge, yellow Cyperus esculentusorchardgrass Dactylis glomeratapampasgrass Cortaderia selloanaparagrass Urochloa muticaphragmites2 Phragmites spp�poison-hemlock Conium maculatumquackgrass Elymus repensredvineBrunnichia ovatareed, giant Arundo donaxryegrass, perennial Lolium perenne Common Name (Cont.)Scientific Namesmartweed, swamp Polygonum amphibiumsowthistle, perennial Sonchus arvensisspatterdock Nuphar luteastarthistle, yellow Centaurea solstitialissweet potato, wild1 Ipomoea panduratathistle, artichoke Cynara cardunculusthistle, Canada Cirsium arvensetimothy Phleum pratensetorpedograss1Panicum repenstrumpetcreeperCampsis radicanstules, common Scirpus acutusvaseygrass Paspalum urvilleivelvetgrass Holcus spp�water fern3 Salvinia sppwaterhyacinth Eichornia crassipeswaterlettuce Pistia stratioteswaterprimrose Ludwigia spp�wheatgrass, western Pascopyrum smithii 1 Partial control� 2 Partial control in southeastern states� 3Not for use in California Woody Brush and Trees Apply this product after full leaf expansion unless otherwise directed� Use the higher labeled rate for larger plants and/or dense areas of growth� On vines, use the higher labled rate for plants that have reached the woody stage of growth� Best results are obtained when application is made in late summer or fall after fruit formation� In arid areas, best results are obtained when applications are made in the spring or early summer when brush species are at high moisture content and are flowering� Ensure thorough coverage when using hand-held equipment� See Low Volume Directed Spray Application section of label� Spray coverage should be uniform with at least 50 percent of the foliage contacted� For best results, cover the top half to 2/3 of the plant foliage� Spray both sides of large or tall woody brush and trees to ensure adequate spray coverage when foliage is thick and dense or where there are multiple sprouts� Symptoms may not appear prior to frost or senescence with fall treatments� Allow seven days or more after application before tillage, mowing or removal� Repeat treatments up to the labeled rate may be necessary to control plants regenerating from underground parts or seed� Some autumn colors on undesirable deciduous species are acceptable provided no major leaf drop has occurred� Reduced performance may result if fall treatments are made following a frost� Note: If brush has been mowed or tilled, or trees have been cut, do not treat until regrowth has reached the specified stage of growth� This product will control, partially control, or suppress the following woody brush and trees� Common Name Scientific Namealder Alnus spp�ash1 Fraxinus spp�aspen, quaking Populus tremuloidesbearclover, bearmat Ceanothus prostratusbeachFagus spp�birch Betula spp�bittercherry Prunus emarginatablackberry Rubus spp�blackgum Nyssa sylvaticablue gum, Tasmanian Eucalyptus globulusbrackenfernPteridium aquilinumbroom, French Genista monspessulanabroom, Scotch Cytisus scopariusbuckwheat, California1 Eriogonum fasciculatumcascara1 Frangula purshianacatclaw-vine1 Macfadyena unguis-caticeanothus Ceanothus spp�chamise Adenostoma fasciculatumcherryPrunus spp�cherry, black Prunus serotinacherry, pin Prunus pensylvanicacopperleaf, hophornbeam Acalypha ostryifoliacoyotebrush Baccharis pilularisdeer vetch Lotus unifoliolatusdewberry, southern Rubus trivialisdogwood Cornus spp�elderberry Sambucus nigraelm1 Ulmus spp�gorse Ulex europaeushasardia1 Haplopappus squamosushawthorn Crataegus spp�hazel Corylus spp�hickory Carya spp�holly, Florida Schinus terebinthifolius Plan Set Date: July 30, 2025 13 Specimen Label Revised 10-01-19 Common Name (Cont.)Scientific Namehoneysuckle Lonicera spp�hornbeam, American Carpinus carolinianakudzu Pueraria montanalocust, black1 Robinia pseudoacaciamadrone, Pacific Arbutus menziesiimanzanita Arctostaphylos spp�maple Acer spp�maple, red1 Acer rubrummaple, sugar Acer saccharummaple, vine1 Acer circinatummonkeyflower1 Mimulus guttatusoakQuercus spp�oak, black1 Quercus kellogiaoak, pin Quercus palustrisoak, post Quercus stellataoak, red Quercus rubraoak, southern red Quercus falcataoak, white1 Quercus albapeppertree, Brazilian Schinus terebinthifoliuspersimmon1 Diospyros spp�pine Pknus spp�poison-ivy, eastern Toxicodendron radicanspoison-oak Toxicodendron spp�poison-sumac1 Toxicodendron vernixprunus Prunus spp�raspberry Rubus spp�redbud, eastern Cercis canadensisrose, multiflora Rosa multifloraRussian-olive Elaeagnus angustifoliasage,: black, white Salvia spp�sagebrush, California Artemisia californicasalmonberry Rubus spectabilissaltcedar1Tamarix ramosissimasaltbush, sea myrtle Baccharis halimifoliasassafras Sassafras albidumsourwood1 Oxydendrum arboreumsumac, smooth1 Rhus glabrasumac, dwarf1 Rhus copallinumsweetgum Liquidambar styracifluaswordfern1 Polystichum munitumtallowtree, Chinese Triadica sebiferaoak, tanbark resprouts Lithocarpus densiflorusthimbleberry, western Rubus parviflorustobacco, tree1 Nicotiana glaucatrumpetcreeper Campsis radicansVirginia-creeper1 Parthenocissus quinquefoliawaxmyrtle, southern1 Myrica ceriferawillow Salix spp�yellow-poplar 1 Liriodendron tulipiferayerba santa Eriodictyon californicum 1Partial control Terms and Conditions of Use If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not acceptable, return unopened package at once to the seller for a full refund of purchase price paid� Otherwise, to the extent permitted by law, use by the buyer or any other user constitutes acceptance of the terms under Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies� Warranty Disclaimer Dow AgroSciences warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated on the label when used in strict accordance with the directions, subject to the inherent risks set forth below� TO THE EXTENT PERMITTED BY LAW, Dow AgroSciences MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY� Inherent Risks of Use It is impossible to eliminate all risks associated with use of this product� Crop injury, lack of performance, or other unintended consequences may result because of such factors as use of the product contrary to label instructions (including conditions noted on the label, such as unfavorable temperatures, soil conditions, etc�), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), presence of other materials, the manner of application, or other factors, all of which are beyond the control of Dow AgroSciences or the seller� To the extent permitted by law, all such risks shall be assumed by buyer� Limitation of Remedies The exclusive remedy for losses or damages resulting from this product (including claims based on contract, negligence, strict liability, or other legal theories), shall be limited to, at Dow AgroSciences’ election, one of the following: (1) Refund of purchase price paid by buyer or user for product bought, or (2) Replacement of amount of product used� To the extent permitted by law, Dow AgroSciences shall not be liable for losses or damages resulting from handling or use of this product unless Dow AgroSciences is promptly notified of such loss or damage in writing� To the extent permitted by law, in no case shall Dow AgroSciences be liable for consequential or incidental damages or losses� The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be varied by any written or verbal statements or agreements� No employee or sales agent of Dow AgroSciences or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or Limitation of Remedies in any manner� ® ™ Trademarks of Dow AgroSciences, DuPont or Pioneer and their affiliated companies or respective owners Produced for Dow AgroSciences LLC 9330 Zionsville Road Indianapolis, IN 46268 Label code: CD02-148-020 Replaced label: D02-148-007 LOES number: 010-01471 EPA accepted 11/27/18 Revisions 1� Updated the trademark line to read, “® ™ Trademarks of Dow AgroSciences, DuPont or Pioneer and their affiliated companies or respective owners” 2� Add “Caution” to the Precautionary Statements and combine the statements into one paragraph� 3� Under Rainfastness – revised sentence to read, “Heavy rainfall soon… repeat application up to the labeled rate may be required� 4� Revised 2nd paragraph of Directed Sprays to read, “Injury to larch may occur especially where spray patterns overlap or higher labeled rates of this…” 5� Removed rates and application method from table of Tank Mix Partners for Forestry Sites� 6� Broadcast Applications Outside Areas of Southeastern United States revised to read, “…overlap or the higher labeled rate is applied�” 7� Chemical Mowing revised sentence to read, “Repeat applications of the tank mix in the same season are not recommended because severe injury may occur�” 8� Add missing table for Hand Held Sprayers to sub-label B 9� Add following statements to Wiper Applications: “Rope or Sponge Wick applications: Use solutions of 33 to 75 percent of this product in water�” “Panel Applications: Use solutions of 33 to 100 percent of this product in water�” 10� Correct typo under “Hollow Stem Injection” “Do not apply more than a total of 7�5 quarts of this product…” 11� Update Mode of Action banner to reflect provisions in PR Notice 2017-01� Plan Set Date: July 30, 2025 1 Clearcast ® Herbicide FOR THE CONTROL OF VEGETATION IN AND AROUND AQUATIC AND NON-CROPLAND SITES INCLUDING AREAS THAT MAY BE GRAZED OR CUT FOR HAY Active Ingredient: ammonium salt of imazamox 2-[4,5-dihydro-4-methyl- 4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid† .....................................................................12.1% Other Ingredients ................................................................................ 87.9% TOTAL ...................................................................................................100.0% † Equivalent to 11.4% 2-[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid 1 gallon contains 1.0 pound of active ingredient as the free acid Keep Out of Reach of ChildrenCAUTION/PRECAUCIÓNSi usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.) See inside for complete Precautionary Statements, Directions for Use, Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions. Notice: Read the entire label before using. Use only according to label directions. Before buying or using this product, read Warranty Disclaimer and Misuse statements inside label booklet. If terms are unacceptable, return at once unopened. EPA Reg. No. 241-437-67690 FPL20161026 EPA Est. No. 067690-NC-002 166801 NVA 2016-04-299-0160 Manufactured for: SePRO Corporation 11550 N. Meridian St., Ste. 600, Carmel, IN 46032 U.S.A. Keep Out of Reach of Children CAUTION/PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.) FIRST AID If on skin or clothing • Take off contaminated clothing.• Rinse skin immediately with plenty of water for 15 to 20 minutes.• Call a poison control center or doctor for treatment advice. If in eyes • Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes.• Remove contact lenses, if present, after the first 5 minutes; then continue rinsing eyes.• Call a poison control center or doctor for treatment advice. If inhaled • Move person to fresh air.• If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably mouth to mouth ifpossible. • Call a poison control center or doctor for further treatmentadvice. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. In case of an emergency endangering life or property involving this product, call INFOTRAC for emergency medical treatment information: 1-800-535-5053. PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION. Harmful if absorbed through skin or inhaled. Causes moderate eye irritation. Avoid breathing spray mist. Avoid contact with skin, eyes or clothing. PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear: •Long-sleeved shirt and long pants;• Chemical-resistant gloves such as barrier laminate, butyl rubber ≥14 mils, nitrile rubber ≥ 14 mils, neoprene rubber ≥ 14 mils, natural rubber(includes natural rubber blends and laminates) ≥ 14 mils, polyethylene, polyvinyl chloride (PVC) ≥ 14 mils, or Viton ≥ 14 mils;•Shoes plus socks. Follow manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. USER SAFETY RECOMMENDATIONS Users should: • Wash hands before eating, drinking, chewing gum, using tobacco orusing the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then washthoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outsideof gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. ENVIRONMENTAL HAZARDS This pesticide may be hazardous to plants outside the treated area. DO NOT apply to water except as specified in this label. DO NOT contaminate water when disposing of equipment washwaters and rinsate. DIRECTIONS FOR USE It is a violation of federal law to use this product in a manner inconsistent with its labeling. This labeling must be in the possession of the user at the time of pesticide application. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. Ensure spray drift to nontarget susceptible species does not occur. DO NOT apply Clearcast® Herbicide in any manner not specifically described in this label. Observe all cautions and limitations on this label and on the labels of products used in combination with Clearcast. DO NOT use Clearcast other than in accordance with the instructions set forth on this label. Keep containers closed to avoid spills and contamination. STORAGE AND DISPOSAL DO NOT contaminate food, feed or water by storage or disposal. Pesticide StorageKeep from freezing. DO NOT store below 32oF. Pesticide DisposalWastes resulting from the use of this product may be disposed of on-site or at an approved waste disposal facility. Container Handling Nonrefillable Container. DO NOT reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recycling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Triple rinse containers too large to shake (capacity >5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application GROUP 2 HERBICIDE Plan Set Date: July 30, 2025 2 STORAGE AND DISPOSAL (continued) equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Refillable Container. Refill this container with pesticide only. DO NOT reuse this container for any other purpose. Triple rinsing the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. Triple rinse as follows: To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.When this container is empty, replace the cap and seal all openings that have been opened during use; return the container to the point of purchase or to a designated location. This container must only be refilled with a pesticide product. Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn-out threads and closure devices. Check for leaks after refilling and before transport. DO NOT transport if this container is damaged or leaking. If the container is damaged, or leaking, or obsolete and not returned to the point of purchase or to a designated location, triple rinse emptied container and offer for recycling, if available, or dispose of container in compliance with state and local regulations. IN CASE OF EMERGENCY In case of large-scale spill of this product, call INFOTRAC at 1-800-535-5053. In case of medical emergency regarding this product, call:•Your local doctor for immediate treatment •Your local poison control center (hospital)•INFOTRAC: 1-800-535-5053 Steps to take if material is released or spilled:• Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to separate containers fordisposal. •Remove contaminated clothing, and wash affected skin areas with soapand water. •Wash clothing before reuse.•Keep the spill out of all sewers and open bodies of water. PRODUCT INFORMATION Clearcast® herbicide is an aqueous formulation that may be diluted in water and either applied directly to water for the control/suppression of certain submerged aquatic vegetation or applied as a broadcast or spot spray to floating and emergent vegetation. Aquatic sites that may be treated include estuarine and marine sites, ponds, lakes, reservoirs, wetlands, marshes, swamps, bayous, arroyos, ditches, canals, streams, rivers, creeks and other slow-moving or quiescent bodies of water. Clearcast may also be used during drawdown conditions. Clearcast may also be applied for terrestrial and riparian vegetation control in industrial noncropland sites, and railroad, utility, and highway rights-of-way. Industrial noncropland sites include utility plant sites, tank farms, pumping installations, storage areas, fence rows and ditch banks. Clearcast may also be used for the establishment and maintenance of wildlife openings. Clearcast may also be used on those sites listed above that may be grazed or cut for hay. Clearcast is quickly absorbed by foliage and/or plant roots and rapidly translocated to the growing points stopping growth. Susceptible plants may develop a yellow appearance or general discoloration and will eventually die or be severely growth inhibited. Clearcast is herbicidally active on many submerged, emergent and floating broadleaf and monocot aquatic plants. The relative levels of control and selectivity can be manipulated by using a choice of rates and herbicide placement (water injected or floating/emergent foliar application). To help maintain the utility of herbicide programs, the use of herbicides with different modes of action is effective in managing weed resistance. Spray Adjuvants Applications of Clearcast to emergent, floating or shoreline species require the use of a spray adjuvant. Always use a spray adjuvant that is appropriate for aquatic sites. Nonionic Surfactants - Use a nonionic surfactant at 0.25% volume/volume (v/v) or higher (see manufacturer’s label) of the spray solution (0.25% v/v is equivalent to 1 quart in 100 gallons). For best results, select a nonionic surfactant with an HLB (hydrophilic to lipophilic balance) ratio between 12 and 17 with at least 70% surfactant in the formulated product (alcohols, fatty acids, oils, ethylene glycol or diethylene glycol should not be considered as surfactants to meet the above requirements). Methylated Seed Oils or Vegetable Oil Concentrates - Instead of a surfactant, a methylated seed oil or vegetable-based seed oil concentrate may be used at 1.5 to 2 pints per acre. When using spray volumes greater than 30 gallons per acre, mix methylated seed oil or vegetable-based seed oil concentrates at 1% of the total spray volume, or alternatively use a nonionic surfactant as described above. Research indicates that these oils may aid in Clearcast deposition and uptake by plants under stress. Silicone-based Surfactants - See manufacturer’s label for specific rates. Silicone-based surfactants may reduce the surface tension of the spray droplet allowing greater spreading on the leaf surface as compared to conventional nonionic surfactants. However, some silicone-based surfactants may dry too quickly, limiting herbicide uptake. Invert Emulsions – Clearcast can be applied as an invert emulsion. The spray solution results in an invert (water-in-oil) spray emulsion designed to minimize spray drift and spray runoff, resulting in more herbicide on the target foliage. The spray emulsion may be formed in a single tank (batch mixing) or injected (in-line mixing). Consult the invert chemical label for proper mixing directions. Other - An antifoaming agent, spray pattern indicator, sinking agent or drift-reducing agent may be applied at the product labeled rate if necessary or desired. Spray Drift Requirements for Aerial Application • Applicators are required to use a coarse or coarser droplet size (ASABE S572) or, if specifically using a spinning atomizer nozzle, applicators are required to use a volume mean diameter (VMD) of 385 microns or greater for release heights below 10 feet. Applicators are required to use a very coarse or coarser droplet size or, if specifically using a spinning atomizer nozzle, applicators are required to use a VMD of 475 microns or greater for release heights above 10 feet. Applicators must consider the effects of nozzle orientation and flight speed when determining droplet size. •Applicators are required to use upwind swath displacement. • The boom length must not exceed 60% of the fixed wingspan or 90% of the rotor blade diameter to reduce spray drift. •DO NOT apply when wind speed is greater than 10 mph. • If applying at wind speeds less than 3 mph, the applicator must determine if 1.Conditions of temperature inversion exist or 2.Stable atmospheric conditions exist at or below nozzle height. DO NOT make applications into areas of temperature inversions or stable atmospheric conditions. Spray Drift Requirements for Ground Boom Application • Applicators are required to use a nozzle height below 4 feet above the ground or plant canopy and coarse or coarser droplet size (ASABE S572)or, if specifically using a spinning atomizer nozzle, applicators are required to use a volume mean diameter (VMD) of 385 microns or greater.• Applications with wind speeds greater than 10 mph are prohibited. •Applications into temperature inversions are prohibited. DO NOT apply when wind conditions may result in drift, when temperature inversion conditions exist, or when spray may be carried to sensitive areas. See Managing Off-target Movement section for more drift reduction recommendations. AQUATIC USE DIRECTIONS Clearcast® herbicide may be applied directly to the water for the control of submerged aquatic plant species and some emergent and floating species, or as a foliar application specifically for emergent and floating species. DO NOT exceed maximum use rate per application: • Water treatment - 500 parts per billion (ppb) (173 fl ozs of Clearcast peracre foot) •Foliar broadcast application – 1 gallon per acre (1.0 lb ae/A)•Foliar spot application - up to 5% Clearcast by volume Clearcast may be applied by surface and aerial equipment including both fixed-wing aircraft and helicopter. Plan Set Date: July 30, 2025 Foliar Application Targeted Emergent and/or Floating Vegetation ApplicationTo make surface applications targeting emergent or floating vegetation, uniformly apply with properly calibrated broadcast or spot treatment equipment in 10 or more gallons of water per acre. Spot treatments can be made with up to 5% Clearcast by volume. To ensure thorough spray coverage, higher spray volumes may be required when treating areas with large and/or dense vegetation. Use an appropriate spray pressure to minimize the drift potential depending upon spray equipment, conditions and application objectives. Foliar Treatment of Emergent and Floating Vegetation Guidelines • Always use a surfactant for foliar applications of emergent and floating weeds. • Foliar applications of Clearcast may be made as a broadcast spray or as a spot spray with a percent spray solution ranging from 0.25% to 5% Clearcast by volume. • Control will be reduced if spray is washed off foliage by wave action. In aquatic sites, those application techniques described in the Terrestrial Use Directions section may be used to treat emergent vegetation. Application to Water Water Application to Target Submerged and/or Emergent/Floating Vegetation Clearcast may be broadcast-applied to the water surface or injected below the water surface. Clearcast may be applied as undiluted product or diluted with water prior to application. Under surface-matted conditions, inject Clearcast below the water surface to achieve better product distribution. Apply Clearcast to water to achieve a final concentration of the active ingredient of no more than 500 ppb. Multiple applications of Clearcast may be made during the annual growth cycle to maintain the desired vegetation response. Clearcast Rates Per Treated Surface Acre Average Water Depth of Treatment Site (feet) Desired Active Ingredient Concentration (ppb)† 50 100 200 500 Clearcast Rate per Treated Surface Acre (fl ozs) 1 17 35 69 173 2 35 69 138 346 3 52 104 207 518 4 70 138 277 691 5 87 173 346 864 6 104 207 415 1,037 7 122 242 484 1,210 8 139 277 553 1,382 9 157 311 622 1,555 10 174 346 691 1,728 †Clearcast contains 1.0 pound of active ingredient per gallon. There are 128 fl ozs in one gallon. Aerial Application Clearcast may be applied by both fixed-wing aircraft and helicopter. There is no minimum spray volume when making applications directly to the water. For applications targeting emergent and/or floating vegetation, uniformly apply with properly calibrated equipment in 5 or more gallons of water per surface acre. For best results, make aerial applications using a minimum of 20 gallons per acre. Drawdown Application Clearcast may be used in drawdown situations to provide postemergence and/or preemergence control/suppression of aquatic vegetation. Apply Clearcast as a broadcast spray at rates up to 1 gallon/A or as a spot spray treatment with up to 5% Clearcast by volume. Make applications when water has receded and exposed soil is moist to dry. For postemergence (foliar) applications, wait at least two weeks after application before reintroducing water. When treating irrigation canals, the initial flush of recharge water after application must not be used for irrigation purposes. RESTRICTIONS • DO NOT apply Clearcast to achieve a total active ingredient concentration in the water greater than 500 ppb. • DO NOT apply more than 1 gallon of Clearcast per surface acre for the control of emergent and floating vegetation. Irrigation Restrictions • DO NOT use treated water to irrigate greenhouses, nurseries orhydroponics until the imazamox concentration has been determined by an acceptable method to be less than or equal to 1.0 ppb.• DO NOT plant sugar beets, onions, potatoes or non-CLEARFIELD® canola in soils that have been previously irrigated with Clearcast-treated wateruntil a soil bioassay successfully demonstrates acceptable levels of crop tolerance. The only exception to this restriction is if the water is from foliarapplications to emergent and/or floating vegetation in flowing water sites where it has been applied at less than or equal to 1.5 quarts per acre towaters with an average depth of greater than or equal to 4 feet. • DO NOT use Clearcast-treated waters resulting in a concentrationgreater than 50 ppb for irrigation of established (emerged) plants until residue levels have been shown to be less than or equal to 50 ppb by anacceptable method. • DO NOT make Clearcast applications in and around golf course irrigation,sod farm irrigation, and vineyard irrigation waterbodies without testing potential irrigation water prior to irrigation and confirming the imazamoxconcentration to be less than or equal to 1.0 ppb. • In still or quiescent waters, do not use Clearcast-treated water resulting ina concentration greater than 10 ppb for irrigation of newly seeded or newly established plants until residue levels have been shown to be less than orequal to 10 ppb by an acceptable method. • Wait 24 hours before irrigating from still or quiescent waters after making a Clearcast application for submerged vegetation less than 100 feet from an irrigation intake.• Wait 24 hours before irrigating from still and quiescent waters after making a Clearcast application to emergent and/or floating vegetation if greaterthan 25% of the surface area of the water body has been treated or application was made less than 100 feet from an irrigation intake.• Flowing waters may be used to irrigate allowable sites with no restrictions when Clearcast is applied at less than or equal to 2 quarts per acre towaters with an average depth of greater than or equal to 4 feet. • After application of Clearcast to dry irrigation canals/ditches, the initialflush of water during recharge must not be used for irrigation purposes unless the imazamox concentration has been determined by an acceptablemethod to be less than 25 ppb. Clearcast applied at less than or equal to 2 quarts per acre in or on waters with a minimum average depth greater than or equal to 4 feet will result in Clearcast concentrations less than 50 ppb. Other Water Use Restrictions There are no restrictions on livestock watering, swimming, fishing, domestic use, or use of treated water for agricultural sprays. Potable Water Clearcast may be applied to potable water sources at concentrations up to 500 ppb to within a distance of ¼ mile from an active potable water intake. Within ¼ mile of an active potable water intake, Clearcast may be applied, but water concentrations resulting from injection and/or foliar applications may not exceed 50 ppb. If water concentrations greater than 50 ppb are required, the potable water intake must be shut and, if necessary, an alternate water supply be made available until the water concentration can be shown to be less than 50 ppb by an acceptable method. Endangered Plant Species To prevent potential negative impacts to endangered plant species, DO NOT apply Clearcast in a way that adversely affects federally listed endangered and threatened species. 3 Plan Set Date: July 30, 2025 4 WEEDS CONTROLLED OR SUPPRESSED BY CLEARCAST Efficacy and selectivity of Clearcast is dependent upon many factors including: dose, time of year, stage of plant growth, plant susceptibility, method of application, and water movement. Rate selection will be partially dependent on characteristics of the treatment area and whether growth regulation or control is desired. Some areas may require a repeat application to control or suppress regrowth. Consult SePRO Corporation to determine best treatment protocols to manage individual species and to meet specific aquatic plant management objectives. Emergent, Floating, and Shoreline Species Controlled with Foliar Application Common Name Scientific Name Rate (fl ozs/A)Comments Alligatorweed Alternanthera philoxeroides 64 to 128 Repeat applications may be necessary. Add 1 qt/A of AquaPro® herbicide for quicker brownout. American lotus Nelumbo lutea 64 to 128 Arrowhead Sagittaria spp.32 to 64 Cattail Typha spp.32 to 64 Apply after full green up through killing frost. Chinese tallowtree Sapium sebiferum 64 to 128 Common reed Phragmites spp.96 to 128 Use 1 qt/A methylated seed oil (MSO); apply in late vegetative stage up to killing frost. Also apply as a spot treatment using 1% to 2% Clearcast per spray volume. Older stands of phragmites and stands growing in water may be more difficult to control and will require follow-up applications. Common salvinia Salvinia minima 32 to 64 Apply with MSO or MSO + silicone-based surfactant; retreatment will be necessary. Floating heart Nymphoides spp.64 to 128 Also apply as a spot treatment using 2% to 5% Clearcast and 1% MSO per spray volume. Floating pennywort Hydrocotyle ranunculoides 32 to 64 Repeat applications may be necessary. Flowering rush Butomus umbellatus 64 to 128 Four-leaf clover Marsilea spp.32 to 64 Frog’s bit, Sponge plant Lymnobium spp.16 to 32 Giant cane Arundo donax 64 to 128 Japanese knotweed Polygonum cuspidatum 64 to 128 Mexican lily Nymphaea mexicana 32 to 64 Mosquito fern Azolla spp.— Apply using 2% to 5% Clearcast and 1% MSO by volume. Parrotfeather Myriophyllum aquaticum 64 to 128 Apply only to emergent vegetation. Pickerelweed Pontederia cordata 32 to 64 Saltcedar Tamarix spp.64 to 128 Also apply using 2% to 5% Clearcast and 1% MSO per spray volume. Smartweed, ladysthumb Smartweed, Pennsylvania Smartweed, swamp Polygonum persicaria, Persicaria maculosa Polygonum pensylvanicum, Persicaria pensylvanica Polygonum coccineum, Persicaria amphibia 64 to 128 Spatterdock Nuphar lutea 64 to 128 Variable-leaf milfoil Myriophyllum heterophyllum 64 to 128 Apply with MSO (1% v/v) as an emergent foliar treatment when plants have emerged on the surface. Also apply as a spot treatment using 1% to 3% Clearcast per spray volume. Water chestnut Trapa natans 64 to 128 Apply with MSO to emergent part of plant. Also apply as a spot treatment using 2% to 5% Clearcast per spray volume. Water hyacinth Eichhornia crassipes 16 to 32 Water lettuce Pistia stratiotes 48 to 96 Water lily Nymphaea spp.32 to 64 Water primrose Ludwigia spp.32 to 64 Add 1 qt/A of AquaPro® herbicide for quicker brownout. Watershield Brasenia schreberi 48 to 64 Wild taro Colocasia esculenta 96 to 128 Species Susceptible to Water-injected Applications The following categories are provided to define species that may be growth regulated or controlled with 50 to 500 ppb Clearcast® herbicide following in-water applications: susceptible, moderately susceptible, and less susceptible. The rates associated with each susceptibility category, including the Special Weed Control section, are provided as guidance with the overriding allowance that an application rate from 50 to 500 ppb may be used depending on the aquatic vegetation management objective and the characteristics of the aquatic vegetation and water body being treated. Some species that are susceptible to foliar applications of Clearcast may be less susceptible to in-water applications. Use of higher rates are necessary to achieve desired control/suppression in areas of greater water exchange; when treating more mature or less susceptible plants; when targeting more difficult-to-control aquatic species; and when treating small areas in larger bodies of water (partial or spot treatments). Lower concentrations are generally used when conducting early season large-scale treatments; when greater selectivity is desired; and treating larger areas, more immature or susceptible plants, and areas with less potential for rapid water exchange. Use of lower rates may increase selectivity on some species within the same category. Effects on susceptible plants can range from control to growth regulation depending on treatment site characteristics, exposure time, and application rate. Susceptible plant species may exhibit herbicide stress or reduced growth during active treatment phases. Whole lake applications with lower rates may provide plant growth regulation or greater selectivity while higher rates will generally provide broader activity. Plan Set Date: July 30, 2025 5 Susceptible Vascular Aquatic Plants (50 to 200 ppb) Common Name Scientific Name Curlyleaf pondweed Potamogeton crispus Eurasian watermilfoil Myriophyllum spicatum Hydrilla Hydrilla verticillata Sago pondweed Stuckenia pectinata Water hyacinth Eichhornia crassipes Water stargrass Heteranthera dubia Moderately Susceptible Vascular Aquatic Plants (100 to 300 ppb) Common Name Scientific Name American pondweed Potamogeton nodosus Bladderwort Utricularia spp. Frog’s bit Lymnobium spongia Illinois pondweed Potamogeton illinoensis Pickerelweed Pontederia cordata Salvinia Salvinia spp. Spikerush Eleocharis baldwinii Variable-leaf milfoil Myriophyllum heterophyllum Wigeon grass Ruppia maritima Less Susceptible Vascular Aquatic Plants (200 to 500 ppb) Common Name Scientific Name Bulrush Schoenoplectus californicus Cattail Typha spp. Coontail Ceratophyllum demersum Eelgrass, Japanese Zostera japonica Egeria Egeria densa Flowering rush Butomus umbellatus Southern naiad Najas guadalupensis Spatterdock Nuphar lutea Water lily Nymphaea odorata Watershield Brasenia schreberi Special Weed Control Eurasian Watermilfoil. Apply Clearcast herbicide at 100 to 200 ppb to actively growing plants early in the growing season. Applications made to mature Eurasian watermilfoil (vegetation topped out) may require multiple applications. Hydrilla. Apply Clearcast at 150 to 200 ppb to actively growing plants early in the growing season. Applications made prior to topped-out hydrilla may require repeat application. A single application of 50 to 75 ppb can be used to suppress and growth-regulate hydrilla for up to 10 to 12 weeks. If desired, an additional 50 to 75 ppb can be applied to extend the period of growth suppression when normal hydrilla growth resumes. Japanese Eelgrass. Japanese eelgrass is a submerged aquatic plant which can be found in tidal and intertidal areas. Clearcast herbicide may be applied directly to the water or directly to the plant (e.g. at low tide). • Low-tide application - To make applications when the plant is exposed at low tide, uniformly apply with properly calibrated broadcast or spot treatment equipment in 10 or more gallons of water per acre. An appropriate spray adjuvant approved for aquatic use may be used but is not required. Spot treatments can be made with up to 5% Clearcast by volume. To ensure thorough spray coverage, higher spray volumes may be required when treating areas with large and/or dense vegetation. Use an appropriate spray pressure to minimize drift potential depending upon spray equipment, conditions, and application objectives. Apply 4 fl ozs to 32 fl ozs Clearcast/A. Use the lower rate for management of seedlings. An appropriate aquatic use spray adjuvant may be used but is not required. • In-water application - When Japanese eelgrass is submerged, Clearcast may be broadcast-applied to the water surface or injected below the water surface. Clearcast may be applied as undiluted product or diluted with water before application. Under surface-matted conditions, inject Clearcast below the water surface to achieve better product distribution. Apply Clearcast to water to achieve a final concentration of the active ingredient of no more than 500 ppb. Multiple applications of Clearcast may be made during the annual growth cycle to maintain the desired vegetation response. Sago Pondweed. In dry ditches (drainage and irrigation), sago pondweed may be controlled or growth-suppressed with soil-applied Clearcast at 64 to 128 fl ozs/A. In irrigation canals, apply Clearcast after drawdown and prior to water recharge. TERRESTRIAL USE DIRECTIONS Restrictions • The maximum amount of active ingredient that can be applied is 1 gallon (equivalent to 1 pound of active ingredient as the free acid) per acre per year.• DO NOT exceed 2 applications of Clearcast per year. Clearcast may be applied with ground and aerial equipment including both fixed-wing aircraft and helicopter. Applications may be made using foliar broadcast spray, foliar spot spray, injection (hack and squirt), frill and girdle, cut stump, or basal methods. Broadcast Spray Application DO NOT apply more than 1 gallon of Clearcast per acre per year. Foliar Spot Application Apply Clearcast as a percent solution, containing up to 5% Clearcast by volume. Injection (Hack and Squirt), Frill and Girdle, and Cut Stump Application Treatments may be made using up to 100% Clearcast by volume. Basal Application Treatments can be made using up to 25% Clearcast by volume. Basal applications require the use of a good emulsion system to maintain Clearcast in a stable emulsion with the penetrating agent being used. All foliar applications of Clearcast require the use of a spray adjuvant. Refer to Spray Adjuvants section for additional information. Managing Off-target Movement The following information is general guidance for managing and minimizing off-target exposure of this product. Specific use directions in this label may vary from these general guidelines depending on the application method and objectives and should supersede the information provided below. Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment-related and weather-related factors determines the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions. The following drift management requirements must be followed to avoid off-target drift movement from aerial applications: 1. The distance of the outermost nozzles on the boom must not exceed ¾ the length of the fixed wingspan or 90% of rotor blade diameter. 2. Nozzles must always point backward parallel with the airstream and never be pointed downward more than 45 degrees. 3. DO NOT apply if wind speed is greater than 10 mph, except when making injection or subsurface applications to water. Where states have more stringent regulations, they must be observed. The applicator must be familiar with and take into account the information covered in the following aerial drift reduction advisory information. Information on Droplet Size The most effective way to reduce drift potential is to apply large droplets. The best drift management strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets reduces drift potential but will not prevent drift if applications are made improperly or under unfavorable environmental conditions (see Wind; Temperature and Humidity; and Temperature Inversions). Controlling Droplet Size: • Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated flows produce larger droplets. • Pressure – DO NOT exceed the nozzle manufacturer’s recommended pressures. For many nozzle types, lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate nozzles instead of increasing pressure. • Number of Nozzles - Use the minimum number of nozzles that provides uniform coverage. Plan Set Date: July 30, 2025 6 • Nozzle Orientation - Orienting nozzles so that the spray is released parallel to the airstream produces larger droplets than other orientationsand is recommended practice. Significant deflection from the horizontal will reduce droplet size and increase drift potential.• Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, narrower spray angles produce largerdroplets. Consider using low-drift nozzles. Solid-stream nozzles oriented straight back produce the largest droplets and the lowest drift. Boom Length For some use patterns, reducing the effective boom length to less than ¾ of the fixed wingspan or 90% of rotor blade diameter may further reduce drift without reducing swath width. Application Height Applications must not be made at a height greater than 10 feet above the top of the largest plants unless a greater height is required for aircraft safety. Making applications at the lowest height that is safe reduces exposure of droplets to evaporation and wind. Swath Adjustment When applications are made with a crosswind, the swath will be displaced downwind. Therefore, on the upwind and downwind edges of the field, the applicator must compensate for this displacement by adjusting the path of the aircraft upwind. Swath adjustment distance should increase with increasing drift potential (higher wind, smaller droplets, etc.). Wind Drift potential is lowest between wind speeds of 2 to 10 mph. However, many factors, including droplet size and equipment type, determine drift potential at any given speed. Application must be avoided below 2 mph due to variable wind direction and high inversion potential. NOTE: Local terrain can influence wind patterns. Every applicator must be familiar with local wind patterns and how they affect spray drift. Temperature and Humidity When making applications in low relative humidity, set up equipment to produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry. Temperature Inversions Applications must not occur during a temperature inversion because drift potential is high. Temperature inversions restrict vertical air mixing that causes small suspended droplets to remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light, variable winds common during inversions. Temperature inversions are characterized by increasing temperatures with altitude and are common on nights with limited cloud cover and light-to-no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Sensitive Areas The pesticide must only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, or crops) is minimal (e.g. when wind is blowing away from the sensitive areas). To the extent consistent with the applicable law, applicator is responsible for any loss or damage which results from spraying Clearcast in a manner other than directed in this label. In addition, applicator must follow all applicable state and local regulations and ordinances in regard to spraying. Clearcast may be used for the control of the following plant species. Clearcast may be effective for the control or suppression of additional plant species not listed below. The use of Clearcast for the control or suppression of undesirable plants not listed below may be done at the discretion of the user. To the extent consistent with applicable law, the user assumes responsibility for any lack of control or suppression associated with application to weeds not listed on this label. Weeds Controlled Common Name Scientific Name Rate Foliar (fl ozs/A) Comments Alligator weed Alternanthera philoxeroides 64 to 128 Addition of AquaPro® herbicide will improve efficacy. Annual ryegrass Lolium multiflorum 16 to 32 Artichoke, Jerusalem Helianthus tuberosus 64 to 128 Bedstraw Galium aparine 64 to 128 Beet, wild Beta procumbens 64 to 128 Brazilian pepper* Christmasberry* Schinus terebinthifolius 96 to 128 Also apply using 2% to 5% Clearcast per spray volume Buckwheat, wild Polygonum convolvulus 64 to 128 Buttercup Ranunculus spp.64 to 128 California bulrush* Schoenoplectus californicus 64 to 128 Camphor tree* Cinnamomum camphora 2% to 5% v/v Canola, volunteer (non-Clearfield®) Brassica campestris Brassica napus 64 to 128 Cattail Typha spp.32 to 64 Chickweed, common Stellaria media 64 to 128 Chinese tallowtree; Popcorn tree Sapium sebiferum 64 to 128 See Special Weed Control section. Cocklebur, common Xanthium strumarium 64 to 128 Filaree, redstem Filaree, whitestem Erodium cicutarium Erodium moschatum 64 to 128 Flixweed Descurainia sophia 64 to 128 Giant ragweed**Ambrosia trifida 32 to 64 Henbit Lamium amplexicaule 64 to 128 Jamaican nightshade*Solanum jamaicense 2% to 5% v/v Japanese stiltgrass Microstegium vimineum 32 to 64 Use MSO at 1% by spray volume. Clearcast will provide some residual control of subsequent seedling emergence. Jimsonweed Datura stramonium 64 to 128 continued Plan Set Date: July 30, 2025 7 Weeds Controlled (continued) Common Name Scientific Name Rate Foliar (fl ozs/A) Comments Johnsongrass, rhizome Johnsongrass, seedling Sorghum halepense 32 to 64 16 to 32 Knotweed, prostrate Polygonum aviculare 64 to 128 Kochia Kochia scoparia 64 to 128 Lambsquarters, common Chenopodium album 64 to 128 Lettuce, miner’s Montia perfoliata 64 to 128 Mallow, common Mallow, Venice Malva neglecta Hibiscus trionum 64 to 128 Mustard spp.Brassica spp.64 to 128 Nettle, burning Urtica urens 64 to 128 Nettleleaf goosefoot Chenopodium murale 64 to 128 Nightshade, black Nightshade, Eastern black Nightshade, hairy Solanum nigrum Solanum ptycanthum Solanum sarrachoides 64 to 128 Old world climbing fern*Lygodium microphyllum 5% v/v Pennycress,field Thlaspi arvense 64 to 128 Phragmites*Phragmites australis Use 1 qt/A methylated seed oil (MSO); apply in late vegetative stage up to killing frost. Also apply as a spot treatment using 1% to 2% Clearcast per spray volume. Older stands of phragmites and stands growing in water may be more difficult to control and will require follow-up applications. Pigweed, prostrate Pigweed, redroot Pigweed, smooth Pigweed, spiny Amaranthus blitoides Amaranthus retroflexus Amaranthus hybridus Amaranthus spinosus 64 to 128 Puncturvine Tribulus terrestris 64 to 128 Purple loosestrife*Lythrum salicaria 32 to 64 Purslane, common Portulaca oleracea 64 to 128 Radish, wild Raphanus raphanistrum 64 to 128 Ragweed, common Ragweed, giant Ambrosia artemisiifolia Ambrosia trifida 64 to 128 Rocket, London Rocket, yellow Sisymbrium irio Barbarea vulgaris 64 to 128 Saltcedar*Tamarix spp.64 to 128 Also apply using 2% to 5% Clearcast and 1% MSO per spray volume. Sedge*, purple Sedge*, yellow Cyperus rotundus Cyperus esculentus 32 to 64 Also apply using 2% to 5% Clearcast per spray volume. Shepherd’s-purse Capsella bursa-pastoris 64 to 128 Smartweed, ladysthumb Smartweed, Pennsylvania Smartweed, swamp Polygonum persicaria, Persicaria maculosa Polygonum pensylvanicum, Persicaria pensylvanica Polygonum coccineum, Persicaria amphibia 64 to 128 Spike rush*Eleocharis spp.64 to 128 Spurge, prostrate Euphorbia maculata 64 to 128 Sunflower, common Helianthus annuus 64 to 128 Swinecress Coronopus didymus 64 to 128 Tansymustard, green Descurainia pinnata 64 to 128 Taro Taro spp.64 to 128 5% v/v Thistle, Russian Salsola iberica 64 to 128 Tropical soda apple*Solanum viarum 2% to 5% v/v Water primrose Ludwigia spp.32 to 64 Addition of AquaPro® herbicide will improve efficacy. Wetland nightshade*Solanum tampicense 2% to 5% v/v Whitetop* Hoary cress*Cardaria draba 8 to 16 Willoweed panicle Epilobium brachycarpum 64 to 128 Velvetleaf Abutilon theophrasti 64 to 128 * Use not permitted in California unless otherwise directed by supplemental labeling ** Suppression of larger, well-established plants In general, the use of methylated seed oil (MSO) at 1% v/v will provide the best control with foliar applications. Plan Set Date: July 30, 2025 Special Weed Control - Chinese tallowtree Clearcast at 64 to 128 fl ozs/A or 0.5 to 2.0% v/v may be applied as a foliar application for selective control of Chinese tallowtree in and around tolerant tree species. Control Chinese tallowtree with foliar applications using aerial, handgun, or backpack application methods. When treating Chinese tallowtree, ensure that application method and spray volume provide adequate coverage of targeted Chinese tallowtree plants. Add methylated seed oil at 32 fl ozs/A for broadcast applications, or at 1% v/v for spot backpack and handgun applications. Tolerant hardwood species may exhibit varying degrees of leaf discoloration and temporary injury. Areas that may be Grazed or Cut for Hay Apply Clearcast to listed aquatic and terrestrial noncrop sites that may be grazed or cut for hay at a maximum use rate of 1 gallon per acre of Clearcast or 5% (v/v) spray solution for spot treatments. There are no grazing or haying restrictions. Warranty Disclaimer: SePRO Corporation warrants that this product conforms to the chemical description on the product label. Testing and research have also determined that this product is reasonably fit for the uses described on the product label. To the extent consistent with applicable law, SePRO Corporation makes no other express or implied warranty of fitness or merchantability nor any other express or implied warranty and any such warranties are expressly disclaimed. Misuse: Federal law prohibits the use of this product in a manner inconsistent with its label directions. To the extent consistent with applicable law, the buyer assumes responsibility for any adverse consequences if this product is not used according to its label directions. In no case shall SePRO Corporation be liable for any losses or damages resulting from the use, handling or application of this product in a manner inconsistent with its label. For additional important labeling information regarding SePRO Corporation’s Terms and Conditions of Use, Inherent Risks of Use and Limitation of Remedies, please visit http://www.seprolabels.com/terms/ or scan the image below. ©Copyright 2016 SePRO Corporation Clearcast and Clearfield are registered trademarks of BASF.AquaPro is a registered trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow. SePRO Corporation 11550 North Meridian Street, Suite 600 Carmel, IN 46032, U.S.A. Plan Set Date: July 30, 2025 Attachment C: Division of Marine Fisheries Diadromous Fish Determination Correspondence CAUTION: This email originated from a sender outside of the Commonwealth of Massachusetts mail system. Do not click on links or open attachments unless you recognize the sender and know the content is safe. This is an External email. Do not click links or open attachments unless you validate the sender and know the content is safe. ALWAYS hover over the link to preview the actual URL/site and confirm its legitimacy. From:Chase, Brad (FWE) To:Proko, Morgan Cc:Ladewig, Matthew; Davis, Amanda (FWE); Sheppard, John (FWE) Subject:[EXTERNAL] RE: Red Lily Pond and Lake Elizabeth NOI Date:Wednesday, December 11, 2024 5:46:51 PM Attachments:image001.png Red Lily Pond datafile 2013-2014.xlsx Hi Morgan, It was good to talk to you and Matt yesterday about the NOI that TRC is preparing for the herbicide treatment plan for Red Lily Pond in Barnstable. I have attached the data file from DMF’s 2013-2014 river herring spawning and nursery habitat assessment. Please feel free to cite or use for preparation of a monitoring plan. The habitat assessment documented the presence of alewife and American eel in the watershed. You can refer to this correspondence in regard to contacting DMF for the NOI diadromous fish determination. I’ve copied Amanda Davis and John Sheppard who will review the NOI when available. Thank you, Brad Bradford C. Chase Diadromous Fish Project Leader Massachusetts Division of Marine Fisheries 836 South Rodney French Blvd. New Bedford, MA 02744 508-742-9747 brad.chase@mass.gov From: Proko, Morgan <MProko@trccompanies.com> Sent: Tuesday, December 10, 2024 3:29 PM To: Chase, Brad (FWE) <brad.chase@mass.gov> Cc: Ladewig, Matthew <MLadewig@trccompanies.com> Subject: Red Lily Pond and Lake Elizabeth NOI Hello, It was great speaking with you today about our Notice of Intent for Red Lily Pond and Lake Elizabeth, we are hoping to get it filed later this month. Please send me the habitat assessment data we discussed at your earliest convenience. I will review anything you have to incorporate in our filing, including the presence of diadromous fish species in the ponds, as we discussed. Please also send us an initial determination from DMF to include in our NOI filing. Thank you for your help! Morgan Proko Environmental Scientist 404 Wyman Street, Suite 375, Waltham, MA 02451 T 781.419.7703 | mproko@trccompanies.com Plan Set Date: July 30, 2025 Attachment D: Environmental Monitor Notice Red Lily Pond Project Inc. (RLPPA) will file a Notice of Intent (NOI) for Red Lily Pond and Lake Elizabeth Management Plan with the Barnstable Conservation Commission on or around November 25, 2024. RLPPA is proposing to implement a vegetation management program at Red Lily Pond and Lake Elizabeth to manage dense growths of nuisance aquatic plants. Management actions will include various herbicide options. The project will improve aquatic habitats that support fish and wildlife species and will restore the natural capacity of the resource area to protect the interests identified in the Wetlands Protection Act (M.G.L. c. 131 §40). The anticipated public hearing date is December 17, 2024. To obtain additional information regarding the dates, times, and locations of the public hearings or to examine copies of the NOI, contact the Barnstable Conservation Commission at Darcy Karle, 200 Main Street, Hyannis, MA, (508) 862-4093. To obtain more information regarding this application or to obtain an electronic copy of the application, contact Morgan Proko at TRC: mproko@trccompanies.com or (781) 419-7703. Plan Set Date: July 30, 2025 Attachment E: Town of Barnstable Checklist and Form PA Chap 707/rev. February 2025 Page 1 CHAPTER 707 Regulation Governing Minimum Submission Requirements for a Notice of Intent Application The Barnstable Conservation Commission has adopted the following requirements in order to obtain more consistently complete submission documents necessary for a thorough and efficient review of all Notice of Intent (NOI) applications. Failure to complete any of the items in this checklist may result in your application being denied. Applicant or applicant’s agent should check each box denoting that the task has been completed or in certain instances, like field staking, denoting that the task will be completed. The following submission checklist covers the requirements of Chapter 237, Wetlands Protection, of the Part I General Ordinances of the Code of the Town of Barnstable. This checklist shall be submitted to the Barnstable Conservation Division with the NOI application. 1.Requirements a.The applicant understands, unless they’ve instructed otherwise, they are applying both under the Massachusetts Wetlands Protection Act M.G.L. c.131,§40 and Chapter 237 of the Town of Barnstable General Ordinances. b.Attach a written narrative to the NOI application (WPA Form 3), available at: www.mass.gov/eea/agencies/massdep/service/approvals/wpa-form-3.html describing any project impacts and proposed mitigation as they relate to the following: 1)Any of the interests of Chapter 237 of the General Ordinances and the MassDEP Wetlands Protection Act M.G.L. 131, §40. 2)The performance standards contained in the MassDEP Wetlands Protection Regulations (310 CMR 10.00) 3)Chapter 704: Regulation Governing Activity in the 100-ft. Buffer Zone. 4)Chapter 703: Private Docks and Piers. 5)Any other applicable regulations (310 CMR 10.00 or as promulgated under Chapter 237 of the General Ordinances). c.Enclose proper payment to cover the fee for Chapter 237 filings. Consult current Fee Schedule at www.townofbarnstable.us/Conservation d.Please indicate who is to record the Order of Conditions (check one): Applicant Agent 2.Abutter Notification (See Abutter Notification Regulation, Chapter 706) Town of Barnstable Conservation Commission 230 South Street Hyannis Massachusetts 02601 Office: 508-862-4093 E-mail: conservation@town.barnstable.ma.us x x x x x x x Chap 707/rev. February 2025 Page 3 c.Provide a signed Permission to Access Property, Form PA. The form must be signed by the property Owner, or legal representative and submitted with the NOI. . Form PA is available at www.townofbarnstable.us/Conservation/. d.For projects requiring mitigation plantings under Chapter 704 -3, 704-4, and 704-5, mitigation planting location(s) shall clearly be shown on landscaping planting plan. The planting plan shall include: 1.species (chosen from the Town of Barnstable Conservation Commission approved planting lists), sizes, densities and/or quantities. 2.area calculations in 0’ - 50’ and 50’ – 100’ separately for the amount of mitigation planting required. 3.the amount of mitigation planting proposed. 4.a note or indication stating the area between the proposed plants will either be planted with an appropriate native seed mix or left to naturalize. 5.a note stating mulch may only be used under the dripline of proposed plants. 6.demarcation markers along the landward side of the mitigation planting area. The type of demarcation marker shall be selected from the list approved by the Conservation Commission. e.Provide detailed, written street directions to the locus (site). f.Provide a copy of a U.S.G.S. locus map indicating the general area of the project site. g.Provide a check for the Town of Barnstable portion of the required filing fee. (The portion payable to the Commonwealth, see 7. e. below) h.Provide any other documentation, photographs, architectural renderings or other supporting data prepared by professionals competent in the field which may be relevant to the application. 6.The site plan shall also show: a.All existing and proposed contours at 2-ft. minimum intervals (1-ft. preferred). b.Clear delineation of all existing and proposed structures and features. Building structures must be accurately dimensioned (fixed location) from property lines and wetland resource areas. Plans shall provide sufficient detail to show all potential wetland impacts, mitigation, compensatory areas, engineered structures, utilities, landscaping, etc. within the area of jurisdiction. On complicated sites, existing and proposed conditions must be shown on separate sheets. c.Locus inset map of the site clearly showing its location relative to surrounding public streets. d.All wetland resource area flags by individual flag number (matched to the field) to clearly identify all resource areas on or within 100 feet of the work area. The individual who performed the flagging and date of flagging shall be identified on the plan next to the resource line. e.Section views showing changes in grade, cuts and fills. 7.SUBMISSION OF THE COMPLETED APPLICATION WITH PLANS: a.Email NOI application and all associated materials in PDF format to Kimberly.Cavanaugh@town.barnstable.ma.us AND Edwin.Hoopes@town.barnstable.ma.us Do not include copies of checks. All attachments must be named with the hearing date (year first), type, name, address. Examples 20220301 NOI Smith 21 Main Street or 2022031 NOI Plan Smith 21 Main Street. c.Provide two (2) full NOI applications with folded plans (colored ink stamp) with signature/date to the Town of Barnstable Conservation Division Office for administrative use; x x x x x x x 30thJuly2025 Driving directions from Conservation office (Google Maps) Parking and access to site (Google Earth) Parking Area To Lake Elizabeth To Red Lily Pond Street parking and site access view (Google Street View) 160 Lake Elizabeth Drive226/137617-312-9866Patricia Deyton, Red Lily Pond Project Association Inc.